Camcorder User Manual
Table Of Contents
- key features of your memory camcorder
- before reading this user manual
- Important information on use
- safety information
- contents
- quick start guide
- getting to know the camcorder
- preparation
- USING THE HAND STRAP
- ADJUSTING THE LCD SCREEN
- BASIC CAMCORDER POSITIONING
- CONNECTING A POWER SOURCE
- CHECKING THE BATTERY STATE
- BASIC OPERATION OF YOUR CAMCORDER
- SWITCHING TO THE POWER SAVING MODE
- LCD SCREEN INDICATORS
- TURNING THE SCREEN INDICATORS ON/OFF
- SHORTCUT MENU (OK GUIDE)
- INITIAL SETTING : TIME ZONE, DATE AND TIME & OSD LANGUAGE
- about the storage media
- recording
- playback
- recording options
- playback options
- settings options
- using with a Windows computer
- connecting to other devices
- maintenance & additional information
- troubleshooting
- specifications
- Contact SAMSUNG WORLD WIDE
78
settings options
LCD Enhancer
Contrast is enhanced for a clear and bright image. This effect is also implemented outdoors in bright daylight.
1. Press the Control button (
/
)
"LCD Enhancer"
OK button.
2. Select the desired submenu item with the Control button (
/
)
OK button.
3. Press the MENU button to exit the menu.
Auto LCD Off
To reduce power consumption, the brightness of the LCD screen is automatically dimmed if the camcorder is
idle for more than 2 minutes.
1. Press the Control button (
/
)
"Auto LCD Off"
OK button.
2. Select the desired submenu item with the Control button (
/
)
OK button.
3. Press the MENU button to exit the menu.
Submenu items
Off: Disables the function
On: When the camcorder is idle for more than 2 minutes in Video or Photo
STBY mode, or for more than 5 minutes when recording a video, the
power saving mode starts by dimming the LCD screen.
•
•
Submenu items
Off: Disables the function
On ( ): LCD Enhancer is executed.
•
•
LCD Enhancer function does not affect the quality of the image being recorded.
When the LCD Enhancer works at low illumination, some stripes may occur on the LCD screen.
This is not a malfunction.
Using the LCD Enhancer function may cause colour look different on the display.
•
•
•
When this "Auto LCD Off" function is enabled, you can press any button on the camcorder to
return LCD brightness to normal.
Auto LCD Off will be disabled in the following cases:
- If the DC power cable (AC power adaptor, USB cable) is connected.
•
•
Settings
LCD Enhancer
LCD Brightness
LCD Colour
Exit
STBY
0:00:00 [475Min]
Select
:
: 0
Settings
LCD Enhancer
LCD Brightness
LCD Colour
Off
On
Exit Move Select
STBY
0:00:00 [475Min]
Settings
Transparency
Auto LCD Off
Menu Design
Exit
STBY
0:00:00 [475Min]
Select
:
: 0%
:
Settings
Transparency
Auto LCD Off
Menu Design
Off
On
Exit Move Select
STBY
0:00:00 [475Min]