Camcorder User Manual
Table Of Contents
- key features of your memory camcorder
- before reading this user manual
- Important information on use
- safety information
- contents
- quick start guide
- getting to know the camcorder
- preparation
- USING THE HAND STRAP
- ADJUSTING THE LCD SCREEN
- BASIC CAMCORDER POSITIONING
- CONNECTING A POWER SOURCE
- CHECKING THE BATTERY STATE
- BASIC OPERATION OF YOUR CAMCORDER
- SWITCHING TO THE POWER SAVING MODE
- LCD SCREEN INDICATORS
- TURNING THE SCREEN INDICATORS ON/OFF
- SHORTCUT MENU (OK GUIDE)
- INITIAL SETTING : TIME ZONE, DATE AND TIME & OSD LANGUAGE
- about the storage media
- recording
- playback
- recording options
- playback options
- settings options
- using with a Windows computer
- connecting to other devices
- maintenance & additional information
- troubleshooting
- specifications
- Contact SAMSUNG WORLD WIDE
83
Version
The version information could be changed without the prior notice.
1. Press the Control button (
/
)
"Version"
OK button.
The version information displayed on the LCD screen.
2. Press the MENU button to exit the menu.
•
Demo
Demonstration automatically shows you the major features that are included with your camcorder so that you
may use them more easily.
1. Press the Control button (
/
/OK)
"Demo"
"On."
If you don't want this function, select the "Off."
2. Press the MENU button to exit the menu.
The Demo function starts on the LCD screen.
•
•
The Demo mode is cancelled in the following cases:
- If any button is operated (Recording start/stop, Photo
, SMART AUTO
, etc.)
However, the camcorder will enter the Demo mode automatically after 5 minutes in STBY mode if it is
idle for 5 minutes without operation. If you don’t want the Demo function to start, set "Demo" to "Off".
- In STBY mode, hold the MENU button for 5 seconds to start demo function immediately without
accessing the menu for setting "Demo: on."
Submenu items
Off: Disables the function.
On: Activates demonstration mode and shows various features on
the LCD screen.
•
•
The Demo function does not operate in the following cases:
- If "Auto Power Off" is set to "5 Min" (uses the battery as main power), the Auto Power Off
function will turn the camcorder off before Demo can run.
Using the Shop Mode
For enhanced performance, the version information can be changed
without prior notice.
Samsung Electronics Co., LTD.
S/W 1.00, JAN 15 2010, 18:08:47
Version
Exit OK
Settings
Language
Default Set
Version
Exit
STBY
0:00:00 [475Min]
Select
Settings
Demo
Version
Language
Exit
STBY
0:00:00 [475Min]
Select
:
Settings
Demo
Version
Language
Off
On
Exit Move Select
STBY
0:00:00 [475Min]