Camcorder User Manual
Table Of Contents
- key features of your memory camcorder
- before reading this user manual
- Important information on use
- safety information
- contents
- quick start guide
- getting to know the camcorder
- preparation
- USING THE HAND STRAP
- ADJUSTING THE LCD SCREEN
- BASIC CAMCORDER POSITIONING
- CONNECTING A POWER SOURCE
- CHECKING THE BATTERY STATE
- BASIC OPERATION OF YOUR CAMCORDER
- SWITCHING TO THE POWER SAVING MODE
- LCD SCREEN INDICATORS
- TURNING THE SCREEN INDICATORS ON/OFF
- SHORTCUT MENU (OK GUIDE)
- INITIAL SETTING : TIME ZONE, DATE AND TIME & OSD LANGUAGE
- about the storage media
- recording
- playback
- recording options
- playback options
- settings options
- using with a Windows computer
- connecting to other devices
- maintenance & additional information
- troubleshooting
- specifications
- Contact SAMSUNG WORLD WIDE
86
USING THE Intelli-studio Programme
Using the built-in Intelli-studio programme in your camcorder, you can transfer video/photo files onto your
PC and edit them on your computer. The Intelli-studio offers the most convenient way for you to manage
video/photo files by using the simple USB cable connection between the camcorder and your PC.
Step 1. Connecting the USB cable
1. Set the menu setting to "PC Software: On."
²
page 81
•
You will find the default menu settings are set as above.
2. Connect the camcorder and the PC with the USB cable.
• A new file saving screen appears with the Intelli-studio main
window.
• According to your computer type, the corresponding removable
disk window appears.
3. Click "Yes", the uploading procedure will start. Click "Yes" to confirm.
• If you do not want to save a new file, select "No."
using with a Windows computer
Disconnecting the USB cable:
After completing the data transfer, make sure to disconnect the cable in the following way:
1.
Click on the “Safely Remove Hardware icon” icon on the taskbar.
2.
Select “USB Mass Storage Device”, and then click “Stop.”
3.
If the “Stop a Hardware device” window appears, click “OK.”
4.
Disconnect the USB cable from the camcorder and PC.
Use the provided USB cable. (Supplied by Samsung)
Don’t apply excessive force when inserting or extracting the USB cable into/from a USB jack.
Insert the USB after checking the correct direction of its insertion.
We recommend using the AC power adaptor as power supply instead of the battery pack.
When the USB cable is connected, turning the camcorder on or off may cause the PC to malfunction.
If you disconnect the USB cable from the PC or the camcorder while transferring data, the data
transfer will stop and the data may be damaged.
If you connect the USB cable to a PC via a USB HUB or simultaneously connect the USB cable
along with other USB devices, the camcorder may not work properly. If this occurs, remove all USB
devices from the PC and reconnect the camcorder.
According to your computer type, the Intelli-studio programme may not run automatically. In this
case, open the desired CD-ROM drive that has the Intelli-studio programme in My Computer and
run iStudio.exe.
•
•
•
•
•
•
•
•
Settings
Default Set
PC Software
TV Display
STBY
0:00:00 [475Min]
Off
On
Exit Move Select