User manual
English - 47
Viewing an External Signal Source
Use the remote control to switch between viewing signals from
connected equipment, such as VCR, DVD, Set-Top Box and the TV
source (broadcast or cable)
1 Press the MENU () button.
Result
: The options available in the Input group are
displayed.
2 Press the ENTER () button.
Result
: The Source List is selected.
3 Press the ENTER () button again.
4 Press the ▲ or ▼ button to select signal source, then press the
ENTER () button.
➢
◆
When you connect equipment to the TV, you can choose
between the following sets of jacks :
Ext., AV1, AV2,
Component1 or Component2 on the TV’s rear panel, and
AV3 or S-Video on the TV’s side panel.
◆
You can select these options simply by pressing the
SOURCE () button.
5 Press the MENU () button.
Result
: The options available in the Input group are
displayed again.
6 Press the ▲ or ▼ button until the Edit Name is selected.
Press the
ENTER () button.
7 Press the ▲ or ▼ button to select the external source to be edited.
Press the
ENTER () button.
Result
:
The device names available are listed
.
VCR
-
DVD
-
Cable STB
-
HD STB
-
Sat. STB
-
AV Receiver
-
DVD Receiver
-
Game
-
Camcorder - DVD Combo - DHR (DVD HDD
Recorder).
8 Select the required device by pressing the ▲ or ▼ button.
Press the
ENTER () button to confirm.
➢
If you change the external source while viewing, pictures
might take a short period of time to be switched.
TV
Input
Source List : TV
√√
Edit Name
√√
Move Enter Return
TV
Input
Source List : TV
√√
Edit Name
√√
Move Enter Return
TV
Source List
TV
Ext. :
----
AV1 :
----
AV2 :
----
AV3 :
----
▼
More
Move Enter Return
TV
Edit Name
Ext. : --------
√√
AV1 : --------
√√
AV2 : --------
√√
AV3 : --------
√√
S-Video :
----
√√
▼
More
Move Enter Return
----
VCR
DVD
Cable STB
HD STB
Sat. STB
▼
g
.
BP68-00468A-01(J60B_ENG_M Asia) 2005/03/28 03:19 PM Page 47