30X Crisp Image Detection PTZ Dome Camera SPD-3000/2300 User’s Manual Thank you for purchasing a SAMSUNG CCD CAMERA. Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. SALES NETWORK • SAMSUNG TECHWIN CO., LTD. 145-3, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, 462-120, Korea TEL : +82-31-740-8151~8158 FAX : +82-31-740-8145 • SAMSUNG OPTO-ELECTRONICS UK, LTD.
The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Features The 30X/23X zoom lens having Auto-focus function magnifies the image up to 300/230 times when used with the digital 10X zoom function. Various Auto Surveillances *Individual Preset Saving Modes 13 camera adjustment functions can be saved independently in each Preset menu to provide optimum images. *Various Protocols 8 different makersí protocols are supported: Samsung Techwin, Pelco, Samsung Electronics, Panasonic and Vicon.
Contents 10 Body Camera Holder Camera Holder Connection Camera Holder Initial Setting 10 Components and Accessories 22 Installation 11 12 13 23 Functional Description 30 OSD Menu Organization Dome Camera User Menu Settings 1. Camera Settings 2. Sequence Setting 3. P/T Setting 4. OSD Setting 5. Alarm Setting 6. Initialization Setting 7.
Precautions Experienced and skilled technicians have to install this product. Unqualified and personal installation may cause fire or electric shock. Contact the dealer for installation. Do not install the product under humid conditions or near flammable or explosive gases. Install the product in a place strong enough to hold it. It may cause failure, electric shock or fire. The product may fall. Do not handle the power plug with wet hands. Do not disassemble or insert foreign objects.
Part Names and Functions Camera Holder ENGLISH Body 9. 1N.C Function Setup Switch 1. Half/Full 2.3.4.5. RS-485/422 Terminal Setting 6. RS-485/422 Communication 7. Factory setting 8. RS-232 Power Switch Power ON/OFF (Factory Setting: OFF) Controller Connection Input 1. RXD+ 2. RXD- 3. TXD+ 4. TXD- 5. GND 6. TX 7. RX ID Setup Switch Alarm Connection Input 1. IN1 2. IN2 3. GND 7. COM1 8. 1N.O 9. 1N.C 4. IN3 10. COM2 5. IN4 11. 2N.
Part Names and Functions Camera Holder Initial Settings Setting Communications Protocol Use the SW3 of installation bracket to set the communications protocol. SW3 0 1 2 3 4 5 6 7 8 9 A B C D E F Protocol Samsung Samsung Pelco-D Pelco-D Pelco-D Pelco-P Pelco-P Samsung Elec. Samsung Elec.
Part Names and Functions Samsung Pelco Samsung Elec. SVR-430 SVR-440 SVR-1630 SVR-1650 9600,19200 9600,19200 9600,19200 9600,19200 9600 4800, 9600 2400,4800,9600 2400,4800,9600 19,200,38,400 19,200,38,400 19,200,38,400 19,200,38400 Notes • Depending on the DVR firmware version, the Control function may not be supported. Use this function after installation of the final version. Setting Camera ID (Camera Holder) Set the Camera ID using 2 rotary switches (SW1 and SW2).
Part Names and Functions SW2 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 9 9 SW1 0 1 2 3 4 5 6 7 8 9 A B C D E F 0 1 2 3 4 5 6 7 8 9 A B C D E F 0 1 2 3 4 5 6 7 8 9 A B C D E F 0 1 Remarks SPEED DOME CAMERA Camera ID ID = 146 ID = 147 ID = 148 ID = 149 ID = 150 ID = 151 ID = 152 ID = 153 ID = 154 ID = 155 ID = 156 ID = 157 ID = 158 ID = 159 ID = 160 ID = 161 ID = 162 ID = 163 ID = 164 ID = 165 ID = 166 ID = 167 ID = 168 ID = 169 ID = 170 ID = 171 ID =
Part Names and Functions The following 3 Camera ID’s cannot be used. Notes R-SW2 0 A A R-SW1 0 0 F ENGLISH Camera ID ID = 0 ID = 160 ID = 175 • Factory Settings: OFF Setting Communication Method (Camera Holder) Setting Transmission Mode (Camera Holder) SW3- #6 Set the transmission mode using the ON/OFF of the Dip Switch 1.
Part Names and Functions CON7- #1 CON7-#2 CON7-#3 CON7-#4 CON7-#5 CON7-#6 CON7-#7 NAME RXD+ RXDTXD+ TXDGND TX RX Purpose Controller Data Line Connection Controller Data Line Connection Controller Data Line Connection Controller Data Line Connection GND For RS-232 Communication For RS-232 Communication Alarm Connection Terminal (Camera Holder) IJP3 - #1 IJP3 - #2 IJP3 - #3 IJP3 - #4 IJP3 - #5 IJP3 - #6 IJP3 - #7 IJP3 - #8 IJP3 - #9 IJP3 - #10 IJP3 - #11 IJP3 - #12 NAME IN1 IN2 GND IN3 IN4 GND COM1 1N.
Installation Components and Accessories Adapter AC24V, Peak 2.5A) User s Manual Preparation for Cable To install and use the SPD-3000/2300, the following cables should be used. • Power Adapter Cable The cable connected to the power input terminal of SPD-3000/2300 is shown below with a rated voltage of AC24V 2.5A.
Installation Installation of SPD-3000/2300 Monitor In Terminal 2. Next, connect the other end of the connector to the Video Input Terminal of the monitor. Video Out Terminal Monitor 3. Then, connect the Power Adapter Cable. Use a driver (-) to screw one part of the Power Adapter consisting of two lines to the Power Input Terminal of the camera holder. 4. Connect the Power Adapter’s plug to the Power Outlet.
Installation Camera Installation (outdoor Housing) ENGLISH 3) Indoor and Outdoor Housing (STH-330PI, STH-330PO) This housing is used to install the speed dome camera on the indoor or outdoor wall or ceiling. (For the indoor type, the fan and heater are excluded.) 1. Fasten the ceiling mount on the ceiling. 2. Pull outside of the housing the safety wire fastened to the outdoor housing. 4) Wall Type Mount (STB-270PW) This item is used to install the indoor or outdoor housing for speed dome on the wall.
Installation 9. Connect the housing safety wires to the fixture inside the mount installed on the ceiling. 6. Adjust and make the arrows marked on the bottom of the camera an arrow body face each other. 10. Connect the video cable, the controller cable, the power adapter cable and ID cable to the camera holder. 7.
Functional Description P1 Dome camera can be set up on the OSD (On Screen Display) menu displayed on the video monitor by the camera controller. The joystick operations in the OSD menu are as follows. In addition, sending control codes to the camera from the PC can also use the camera functions.
Functional Description P2 Area Setting P/T Setting Area Masking OSD Setting Prop.
Functional Description FOCUS • Execution of OSD Menu : After checking if the camera is in manual operation mode, press the OSD Menu key or 1+MENU (SCC-16 Model). The following commands are displayed on the monitor screen. • Main Menu The selection key moves up and down. Press the execution key switch on the selected menu to change the setup menu. Press the ESC key to exit the OSD Menu.
Functional Description Camera Setting Focus White Balance Exposure Back Light AGC SSNR Day & Night Others ATW(O) OFF MIDDLE MIDDLE COLOR WB Mode ATW: Balances the colour automatically depending on the source of light from 1,800~10,500K colour temperature. * Indoor[ATW(I)] : Use this mode in the area under the limited colour temperature. * Outdoor[ATW(O)]: Use this mode in the area under the broad colour temperature.
Functional Description Notes • As the accumulated magnification increases, the screen goes bright. But, the after image of the moving object also becomes larger and the optimum Auto Focus function may not work. Camera Setting Focus White Balance Exposure Back Light AGC SSNR Day & Night Others Camera Setting Focus White Balance Exposure Back Light AGC SSNR Day & Night Others ATW(O) OFF MIDDLE MIDDLE COLOR ATW(O) OFF OFF MIDDLE COLOR Select one mode among High, Middle, Low or Off.
Functional Description Camera Setting Focus White Balance Exposure Back Light AGC SSNR Day & Night Others Camera Setting Focus White Balance Exposure Back Light AGC SSNR Day & Night Others ATW(O) OFF MIDDLE MIDDLE AUTO ATW(O) OFF MIDDLE MIDDLE B/W Camera Setting Focus White Balance Exposure Back Light AGC SSNR Day & Night Others ATW(O) OFF MIDDLE MIDDLE COLOR COLOR : Output images are displayed in colour all the time. Burst signal size can be adjusted.
Functional Description 2) Sequence Setting • Sequence Setting Menu Sequence Setting Preset Swing SEQ Group SEQ Tour SEQ PTZ Trace Auto Run Power On Resume OFF Clear : Select the Preset number to delete for clearing. Status : The current Preset number setup is displayed. • Motion Detection Setting Select Motion Detection in the Preset Setting menu and then turn on the mode. Notes • When the illumination is shaking under direct lighting such as a fluorescent lamp, it may cause malfunction of the camera.
Functional Description 6. If you select the Scene Adj. item, such items as Shutter, AGC, SSNR, Sens-Up, White Balance and DIS can be set up differently in every Preset item. Preset Edit PTZ Focus Mode Brightness Iris Back Light Day & Night Motion Det. Scene Adj Scene Adj. Shutter AGC SSNR Sens-Up White Balance Stabilizer [001] 267/051/1X Manual 050 AUTO OFF COLOR OFF [001] --MIDDLE MIDDLE AUTO ATW OFF Notes • In the White Balance setting of the individual Preset Scene Adj.
Functional Description Sequence Setting Preset Swing SEQ Group SEQ Tour SEQ PTZ Trace Auto Run Power On Resume OFF Notes • Press the OSD key to stop the internal memory to continue saving. Tour SEQ Setting Execute Clear Setting : The registered Group Sequence is selected with the joystick and confirmed with the Execution key. If the selected number is not registered, it cannot be input. Press the Execution key in the location with selection mark to finish the setting process.
Functional Description Main Menu Pan Limit : The moving range in the Pan direction can be limited. Main Menu P/T Setting Camera Setting Sequence Setting P/T Setting OSD Setting Alarm Setting Initialize Status Pan Limit Tilt Limit Area Setting Area Masking Prop. P/T Digital Flip ON ON Tilt Limit : Moving range in the tilt direction can be limited. P/T Setting Camera Setting Sequence Setting P/T Setting OSD Setting Alarm Setting Initialize Status Pan Limit Tilt Limit Area Setting Area Masking Prop.
Functional Description Prop. P/T : Pan and Tilt speeds can be changed depending on zoom magnification. Tele will slow down the speed of Pan/Tilt and Wide will increase the Pan/Tilt speed. It will take about 15 seconds for 1 cycle in Tele mode and about 1.5 seconds in the Wide mode. Default setting is ON. Main Menu P/T Setting Camera Setting Sequence Setting P/T Setting OSD Setting Alarm Setting Initialize Status Pan Limit Tilt Limit Area Setting Area Masking Prop.
Functional Description : A maximum of 12 characters consisting of English (or Chinese, Japanese), numbers and special characters can be input for Camera Name. On/Off : The operation of this function is preset. Default setting is On. Preset Number (Default setting is ON.) : Preset numbering is set up.
Functional Description Main Menu OSD Setting Camera Setting Sequence Setting P/T Setting OSD Setting Alarm Setting Initialize Status Camera ID Camera Name Preset Number Preset Name Sequence Status Area Name PTZ Position Language ON ON OFF OFF ON English Language : The OSD can be displayed either in English (default setting) or in Chinese.
Functional Description MD Dwell Time : When the Motion Detection function is on, the motion of intruders can be detected. When the motion is detected, the Alarm signal is displayed in the Alarm Output Terminal. For detailed settings of the Motion Detection for each Preset menu, see page 43 and 44.
Product Structure and Installation Installation 243.4 215.7 27.7 ENGLISH Product Structure R75 Ø155 SPEED DOME CAMERA 58 User’s Manual *Other Installations: The outdoor installation accessories, which are sold separately, can be applied in various ways. (See 25 and 26 page for the accessories on sale.
Product Structure and Installation Installation 2 SPEED DOME CAMERA 60 User’s Manual ENGLISH Installation 1 SPEED DOME CAMERA 61 User’s Manual
Specifications SPD-2300 1/4” Color Interline Transfer CCD. 410.000pixel TV Accuracy of Horizontal 811(H) X 508(V) Vertical Rotation Valid Pixel 768(H) X 494(V) Vertical Rotation Speed Internal Sync/External Sync(AC Line Lock) Horizontal Resolution Minimum Light for Object Accuracy of Vertical Rotation Stop Higher than 50dB (AGC OFF) Preset Position Max 128 points 520 TV Lines (Colour)/570 TV Lines(B/W) Area Masking Max 4 locations 0.7Lux(Color), 0.1Lux(B/W)/(@50IRE), 0.
Detección de imagen de alta precisión 30X Cámara Dome PTZ SPD-3000/2300 Manual de Uso Gracias por comprar una cámara CCD de Samsung. Antes de intentar conectar o utilizar este producto, lea atentamente estas instrucciones y guarde este manual para futura referencia.
El relámpago con símbolo de flecha dentro de un triángulo equilátero alerta al usuario de la presencia de "voltaje peligroso" no aislado dentro de la envoltura del producto que podría tener magnitud suficiente como para constituir riesgo de descarga eléctrica. importantes de funcionamiento y mantenimiento (servicio) en la literatura que acompaña a la aplicación.
Características Lente Zoom 30X/23X con Función Autoenfoque El Zoom 30X/23X al tener función Autoenfoque aumenta la imagen hasta 240 veces cuando se usa con la función de Zoom digital 10X. *Programación Individual Modos de Seguridad. 13 funciones de ajuste de cámara pueden ser guardadas independientemente en cada menú de Programación para proporcionar imágenes óptimas. *Varios Protocolos Soporta ocho diferentes protocolos de marcas: Samsung Techwin, Pelco, Samsung Electronics, Panasonic and Vicon.
Tabla de contenidos Precauciones de Seguridad Nombre de las partes y funciones Instalación 10 10 11 12 13 22 23 Organización Menú OSD Ajustes del Menú de Uso Cámara Domo 1. Camera Setting 2. Sequence Setting 3. P/T Setting 4. OSD Setting 5. Alarm Setting 6. Initialize 7.
Precauciones de Seguridad No se recomienda su Instalación por parte de personas no cualificadas. En caso de olores no usuales o humo procedente de la cámara, dejar de usar el producto. Puede causar avería, descarga eléctrica o fuego. No manipular la toma de corriente con las manos húmedas. El producto puede caer. No desmontar o introducir objetos extraños. Puede causar descarga eléctrica. CÁMARA SPEED DOME Instalar el producto en un lugar lo suficientemente fuerte como para sostenerlo.
Nombre de las partes y funciones Cuerpo Soporte de la cámara ESPAÑOL Interruptor de Energía Energía ON/OFF ( Encendida/Apagada) (Programación de fábrica: OFF) ( Apagada) Encender Interruptor de establecimiento 1. Medio/Lleno 2.3.4.5 RS-485/422 6.RS-485/422 Comunicación 7. Ajuste de fábrica 8. RS-232 Entrada de Controlador de Conexión 1. RXD+ 2. RXD- 3. TXD+ 4. TXD- 5. GND 6. TX 7. RX Interruptor de Establecimiento de ID Entrada conexión de alarma 1. IN1 2. IN2 3. GND 4. IN3 5. IN4 6. GND 7. COM1 8. 1N.
Nombre de las partes y funciones Conexión del Soporte de la cámara Ajustes Iniciales del Soporte de la Cámara Ajuste de protocolo de comunicaciones Usar el SW3 del soporte de instalación para ajustar el protocolo de comunicaciones. Protocol Samsung Samsung Pelco-D Pelco-D Pelco-D Pelco-P Pelco-P Samsung Elec. Samsung Elec.
Nombre de las partes y funciones l Ajuste de Velocidad basado en el modelo DVR ( Soporte cámara) Ajuste del Interruptor de ID de Cámara (Soporte Cámara) Si la velocidad de la cámara domo no es controlada por la cámara sino por un DVR, establezca la velocidad de comunicación en base a los modelos DVR como sigue: Pelco Samsung Elec.
Nombre de las partes y funciones SW2 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 9 9 SW1 0 1 2 3 4 5 6 7 8 9 A B C D E F 0 1 2 3 4 5 6 7 8 9 A B C D E F 0 1 2 3 4 5 6 7 8 9 A B C D E F 0 1 Comentarios CÁMARA SPEED DOME ID Cámara ID = 146 ID = 147 ID = 148 ID = 149 ID = 150 ID = 151 ID = 152 ID = 153 ID = 154 ID = 155 ID = 156 ID = 157 ID = 158 ID = 159 ID = 160 ID = 161 ID = 162 ID = 163 ID = 164 ID = 165 ID = 166 ID = 167 ID = 168 ID = 169 ID = 170 ID
Nombre de las partes y funciones Las tres siguientes ID de Cámara no pueden ser usadas. ID Cámara ID = 0 ID = 160 ID = 175 R-SW2 0 A A Nota R-SW1 0 0 F • Ajuste de fábrica: OFF Ajuste de Método de Comunicación(Soporte Cámara) Función Aumento de Fábrica SW3- #6 Ajuste el modo de transmisión usando el On/Off ( Encendido Apagado)del interruptor de Sondeo. 1.
Nombre de las partes y funciones Controlador de Conexión con la terminal (Soporte Cámara) Nombre RXD+ RXD+ TXD+ TXD+ GND TX RX Objetivo Controlador Conexión Línea de Datos Controlador Conexión Línea de Datos Controlador Conexión Línea de Datos Controlador Conexión Línea de Datos GND Para Comunicación RS-232 Para Comunicación RS-232 Terminal de Conexión de Alarma (Soporte Cámara) SW3 - #1 SW3 - #2 SW3 - #3 SW3 - #4 SW3 - #5 SW3 - #6 SW3 - #7 SW3 - #8 SW3 - #9 SW3 - #10 SW3 - #11 SW3 - #12 Nombre IN1 IN2 G
Instalación Accesorios Accesorios Preparación del cable Adaptador AC24V, Máximo 2,5A) Bloqueo de la terminal para la conexión de la alarma(12Pin) Cables • Cable de Vídeo El cable conectado a la terminal de salida del vídeo y al monitor de SPD-3000 /2300 es el cable BNC que se muestra a continuación. Productos vendidos separadamente Los siguientes productos se venden por separado.
Instalación Conexión del cable Instalación de SPD-3000/2300 1. Primero, conectar una punta del cable del video BNC a la terminal de salida del vídeo. 4. Conectar el enchufe del Adaptador de Corriente a la Salida de Energía. • Accesorios vendidos por separado Use los siguientes accesorios que se venden por separado para una idónea instalación dependiendo de los lugares de instalación. 2. Después conectar el otro extremo del conector a la terminal de entrada de vídeo en el monitor.
Instalación 3) Cubierta Interior y Exterior (STH-330PI, STH-330PO) Esta cubierta se usa para instalar la Cámara velocidad domo en el techo o pared interior o exterior. (Para el tipo interior, se excluyen el ventilador y calentador) Instalación de la Cámara (Cubierta Exterior) 1. Sujetar el montaje de la cubierta en el techo. 4) Montaje Tipo Pared (STB-270PW) Este artículo se utiliza para instalar la cubierta interior o exterior para la cámara velocidad domo en la pared. 3.
Instalación 9. Conectar los cables de seguridad de la cubierta al punto fijo dentro del montaje instalado en el techo. 6. Ajustar y poner las flechas marcadas en el fondo del cuerpo de la an arrow cámara una enfrente de la otra. 10. Conectar el cable del video, el cable del controlador, el cable del adaptador de energía y el cable ID al soporte de la cámara. 7.
Descripción funcional Organización del menú OSD P1 La cámara Domo puede ser establecida en el menú OSD (Visualización en Pantalla) visualizado en el monitor del vídeo por el controlador de la cámara. Las operaciones con el joystick en el menú son las siguientes. Además, al enviar códigos de control a la cámara desde el PC Puede también usar las funciones de la cámara.
Descripción funcional P1 P2 Area Setting P/T Setting Area Masking Alarm Input Alarm Setting Timer1 Alarm Out Timer2 Initialize Out Off1 Out Off2 MD Dwell Time ON / OFF Power On Reset Cancel Execute Factory Default Set Cancel Execute Camera Default Set Cancel Execute Auto Refresh OFF, 1~7Days Initial Position Position ON/OFF P4 Defaults Area Name Position ON/OFF Position ON/OFF ON ON ON ON ON OFF OFF English OFF NC/NO/COM 1~4(Priority) Preset/Group/Tour A.
Descripción funcional Ajustes de Menú de Usuario Cámara Domo • Ejecución del menú OSD Tras comprobar si la cámara está en modo de operación manual, presionar la tecla de menú OSD o 1+ MENÚ (Modelo SCC-16) Las siguientes órdenes son visualizadas en la pantalla del monitor. • Menú Principal Camera Setting Sequence Setting P/T Setting OSD Setting Alarm Setting Initialize Status Aumento del Zoom digital puede ser seleccionado entre, 2X~10X.
Descripción funcional Exposure White Balance La función de White Balance corrige el color blanco anormal a color blanco normal bajo cualquier temperatura de color o alumbrado. Seleccionar el modo entre ATW, AWC y Manual. ATW es seleccionado por defecto. Camera Setting ATW(O) OFF MIDDLE MIDDLE COLOR AWB Mode ATW : Balance automático del color dependiendo de la fuente de luz de 1,800-10,500K temperatura del color. * Indoor[ATW(I)] : Iluminación Interior.
Descripción funcional Sens-Up Auto : El bajo nivel de luz de la noche o condiciones de oscuridad es detectado automáticamente y la imagen se puede mantener clara y brillante. Límite de Aumento Automático de la Seguridad Se puede seleccionar un máximo aumento acumulado. Off : La función Aumento Automático de la Seguridad es cancelada. • A medida que se incrementa el aumento acumulado, la pantalla se vuelve brillante.
Descripción funcional Middle : El efecto de reducción de ruidos es generalmente efectivo en este modo. El ruido puede ser reducido adecuadamente y la imagen consecutiva no es fuerte. High : El efecto de reducción de sonido es excelente pero la imagen consecutiva es también fuerte. Nota B/W : La imagines producidas son visualizadas en blanco y negro todo el tiempo. La señal de ráfaga puede mantenerse o desactivarse.
Descripción funcional Internal : Sincronización interna Line Lock : Sincronización Línea de Energía Line Lock Phase : La fase de sincronización de línea puede ser seleccionada de 0 a 360˚. El valor inicial es 225˚ Stabilizer : corrige la vibración de la cámara. • Este estabilizador podría no funcionar adecuadamente si se encontrase bajo las condiciones descritas a continuación: 1. Oscuridad (poca o total ausencia de luz) alrededor del objeto 2. Ausencia de contraste en el objeto 3.
Descripción funcional Nota • Ajustar el Menú de Programación. 1. Seleccionar el punto de programación en el Menú de Ajuste de Secuencia Presionar la tecla Enter (Entrar) 2. Seleccionar el punto Ajustar Sequence Setting Preset Preset Swing SEQ Group SEQ Tour SEQ PTZ Trace Auto Run Power On Resume OFF 6. Si seleccionas el punto de Ajuste de Escena, los puntos tales como el Obturador, AGC, SSNR, Aumento Automático de la Seguridad.
Descripción funcional Pan Swing : Se ejecuta y establece Vigilancia de movimiento en dirección panorámica. Los datos son borrados. Tour SEQ : Se puede ejecutar y establecer la vigilancia de grupo y los datos se pueden borrar. Tilt Swing : Se ejecuta y establece Vigilancia de movimiento en dirección inclinada. Los datos son borrados. Sequence Setting P/T Swing : Vigilancia de movimiento para ambas direcciones panorámica e inclinada es ejecutada y establecida. Los datos son borrados.
Descripción funcional Memorize : Operaciones manuales para un mínimo de120 segundos tras la ejecución de esta función son memorizadas en la memoria interna. Sin embargo, el tiempo de memorización es diferente dependiendo de la operación PTZ. La marca OVER finalizará esta función. Power On Resume : Cuando el suministro de energía de la cámara es interrumpido por algún motivo, tal como un fallo eléctrico, y reanudado, los Ajustes de Secuencia anteriores al corte de energía son restaurados.
Descripción funcional Tilt Limit : La variedad de movimiento en la dirección de inclinación puede limitarse. Main Menu P/T Setting Pan Limit Tilt Limit Area Setting Area Masking Prop. P/T Digital Flip ON ON Position : Se puede establecer la variedad de movimiento. Establecer la posición desde la dirección tope usando el joystick y la tecla de Ejecución.
Descripción funcional Prop. P/T : Las velocidades de Panorámica o Inclinación se pueden cambiar dependiendo del aumento del Zoom. Tele bajará la velocidad de Pan/ Tilt y Wide aumentará la velocidad Pan/ Tilt Llevará sobre 15 segundos para 1 ciclo en modo Tele y sobre 1.5 segundos en modo Wide. El ajuste por defecto es OFF ( Apagado). Main Menu P/T Setting Pan Limit Tilt Limit Area Setting Area Masking Prop.
Descripción funcional Preset Number (El Ajuste por defecto es ON) : La numeración de programación es establecida. Main Menu On/Off ( Encendido/ Apagado) : La operación de esta función está predeterminada. El ajuste por defecto es On (Encendido).
Descripción funcional Language : La representación en pantalla podrá visualizarse en inglés (configuración por defecto) o en chino. Main Menu OSD Setting Camera ID Camera Name Preset Number Preset Name Sequence Status Area Name PTZ Position Language ON ON OFF OFF ON English 5) Alarm Setting Alarm Setting Alarm Enable : Se puede determinar la activación de ajustes de alarma.
Descripción funcional MD Dwell Time : cuando la función de detección de movimiento esté activada, el equipo podrá detectar el movimiento de intrusos. Cuando se detecte movimiento, la señal de alarma aparecerá en la terminal de salida de la alarma. Para más información acerca de la configuración detallada de la Detección de movimiento para cada menú de valores predeterminados, consulte las páginas 45 y 46.
Estructura del producto e instalación Estructura del Producto Instalación Montaje para el techo tipo (STB-330PC) Fuente Voltaje de electricidad: 24V ESPAÑOL Cubierta 243.4 215.7 27.7 Proceso para el techo tipo (STB-330PC) Voltaje de electricidad: 24V Cubierta R75 Ø155 CÁMARA SPEED DOME 60 Manual de Uso *Otras instalaciones: La instalación de accesorios exteriores, los cuales se venden por separado, puede ser llevada a a cabo de varias formas.
Estructura del producto e instalación Instalación 1 Instalación 2 ESPAÑOL CÁMARA SPEED DOME 62 Manual de Uso CÁMARA SPEED DOME 63 Manual de Uso
Especificaciones SPD-3000 Mecanismo öptico SPD-2300 1/4” Color Transferencia Del Interline CCD. 410.000pixel TV Eficacia de la detención de rotación 811(H) X 508(V) Rotación Vertical Pixel Válido 768(H) X 494(V) Velocidad de Rotación Vertical 15.734kHz Ángulo mínimo de movimiento Frecuencia de exploración vertical Mas alta que 50dB (AGC OFF) Resolución Horizontal 520 TV Líneas (Color)/570 TV Líneas(B/N) Luz minima para el objeto 0.30˚ vertical 1.0p –p/75Ω Proporción S/N 0.
DECLARATION OF CONFORMITY Application of Council Directive(s) EMC-Directive 89/336 EEC and its amendments Manufacturer's Name SAMSUNG TECHWIN CO., LTD Manufacturer's Address SAMSUNG TECHWIN CO., LTD 42, SUNGJU-DONG CHANGWON-CITY, KYUNGNAM, KOREA, 641-120 European Representative Name European Representative Address Equipment Type/Environment Dome Camera Model Name SPD-3000P/2300P Beginning Serial NO. S6600001 Year of Manufacture 2006. 6.