User Manual

17
GB
Presetting the Stations AutomaticallySetting the RF OUT CHANNEL
16
GB
The initial setting of the RF OUT channel is CH60.
In order to view signals from the RF out connector on your TV, you
must set the RF OUT channel on the VCR matches the TV channel.
1 Press the MENU button on the remote control.
Result: The MAIN menu is displayed.
2 Press the or button to select installation.
Result: The I N S T A L L A T I O N menu is displayed.
3 Press the , button to select MANUAL SET UP.
Result: The MANUAL SET UP menu is displayed.
4 Press the button until the cursor is placed in front of
RF OUT CHANNEL.
5 Press the or button to change the RF OUT CHANNEL.
Result: The RF OUT CH is changed.
➢ Your VCR RF out channel may need to be changed if
there is no picture or the picture suffers from interference.
For better picture and sound quality, connect your VCR to
the TV using the SCART cable (if the appropriate SCART
input is available on your TV).
1
Your VCR contains a built-in tuner used to receive television
broadcasts. It can also receive cable television broadcasts.
You must preset the stations received through the tuner. This can
be done:
◆ automatically ; or
◆ manually (see page 18).
1 Press the MENU button on the remote control.
Result: The MAIN menu is displayed.
Press the or button to select I N S T A L L A T I O N .
Press the OK button to select this option.
2 Press the , button to select AUTO SET UP.
3 Press the OK button to start the auto scanning.
Result: ◆ The PLEASE WAITindication flashes on the
television screen.
◆ The first frequency band is scanned and the first
station found is displayed and stored.
◆
The VCR then searches for the second station and so on.
◆ When the automatic scanning procedure has
finished, the VCR switches automatically to
program 1.
➢ The number of stations automatically stored by the VCR
depends on the number of stations that it has found.
4 If you wish to cancel the auto scanning before the end, press the
MENU button three times to exit the menu.
➢ ◆ Once the auto scanning procedure has finished, some
stations may have been stored more than once; select
the stations with the best reception and delete the
ones no longer required (see page 18).
O K E N D:M E N U
I N S T A L L A T I O N
COUNTRY SET
AUTO SET UP
MANUAL SET UP
E N D:M E N U
O K E N D:M E N U
I N S T A L L A T I O N
E U R O P E
R U S S I A
PRESS O KTO CONTINUE
M E N U TO EXIT
AUTO SET UP
PLEASE WAIT
1
%
E N D:M E N U
COUNTRY SET
AUTO SET UP
MANUAL SET UP
E N D:M E N U
* *
MANUAL SET UP
* *
MANUAL TUNING
RF OUT M/G/I/K : G
RF OUT CH 21-69 : 6 0
E N D:M E N U
00872A SV-2000M/xev-GB2 9/8/56 12:11 PM Page 16