User Manual

19
GB
Clearing a Preset Station
18
GB
Presetting the Stations Manually
Your VCR contains a built-in tuner used to receive television
broadcasts. It can also receive cable television broadcasts.
You must preset the stations received through the tuner. This can
be done:
◆ automatically (see page 17) ; or
◆ manually.
1 Press the MENU button on the remote control.
Result: The MAIN menu is displayed.
2 Press the corresponding or button, until the cursor is placed
in front of the I N S T A L L A T I O N option.
3 Press the OK button to select this option.
Result: The I N S T A L L A T I O N menu is displayed.
4 Press the corresponding or button, until the cursor is placed
in front of the
MANUAL SET UPoption.
5 Press the button to select MANUAL SET UPoption.
Result: The TV STATION TABLE menu is displayed.
6 Press the or button to select a program number as required.
7 Press the button to preset the station.
Result: The MANUAL TUNINGmenu is displayed.
8 Press the corresponding or button to place the cursor in front
of the
C H.
Press the or button to start scanning.
Result: The frequency band is scanned and the first station
found is displayed.
If you know the number of the channel you want, press the
numeric buttons on the remote control for example, for channel
04, first press “0” and then press “0”, “4”.
9 Press the or button until the cursor is placed in front of the
N A M E.
10 To change the program’s name, press the button.
Result: The first letter of the name flashes.
11 To... Then...
Select a character Press the or button until the
in the name required character is displayed
(letters, numbers or “-” character).
Move to the next or Press the or button
previous character respectively.
12 If you... Then...
Wish to store the ◆ Press the corresponding or button
station displayed to place the cursor in front of the M F T.
◆ Press the or button to adjust the
picture, if necessary.
◆ Press the OK button to store the station .
Do notwish to ◆ Press the corresponding or button
store the station to place the cursor in front of the C H.
displayed ◆ Press the or button to go on
scanning the frequency band and display
the next station
◆ Go back to the beginning of Step 12
13 Repeat this procedure from Step 6 onwards, until all the required
stations have been stored.
14 On completion, press the MENU button three times to exit the menu.
O K E N D:M E N U
I N S T A L L A T I O N
COUNTRY SET
AUTO SET UP
MANUAL SET UP
E N D:M E N U
* *
MANUAL SET UP
* *
MANUAL TUNING
RF OUT M/G/I/K : G
RF OUT CH 21-69 : 6 0
E N D:M E N U
** TV STATION TABLE **
P R CH NAME
1
2
3
4
5
S E T : S O R T :O K
D E L E T E :C L R / R S T M E N U
** MANUAL TUNING **
P R : 1
C H : --- 41MHZ
M F T : -
N A M E : - - - -
M E M O R Y: O K
E N D:M E N U
If you have stored a TV station:
◆ That you do not require
◆ At the wrong program position
you can cancel it.
1 Press the MENU button on the remote control.
Result: The MAIN menu is displayed.
2 Press the corresponding , or , buttons to select the
I N S T A L L A T I O N option.
3 Press the OK button to select this option.
Result: The I N S T A L L A T I O N menu is displayed.
4 Press the corresponding or button, until the cursor is placed
in front of the MANUAL SET UPoption.
5 Press the button to select this option.
Result: The TV STATION TABLE menu is displayed.
6 Press the corresponding or button, until the cursor is placed
in front of the required preset TV station. (PR)
7 Press the CLR/RST button.
8 Repeat the same procedure from Step 6 onwards until all the
required stations have been cleared.
9 On completion, press the MENU button three times to exit the
menu.
** TV STATION TABLE **
P R CH NAME
1 0 0 1 - - - -
2 0 1 4 - - - -
3 0 0 3 - - - -
4 0 7 5 - - - -
5 2 0 4 - - - -
S E T : S O R T :O K
D E L E T E :C L R / R S T M E N U
O K E N D:M E N U
I N S T A L L A T I O N
COUNTRY SET
AUTO SET UP
MANUAL SET UP
E N D: M E N U
* *
MANUAL SET UP
* *
MANUAL TUNING
RF OUT M/G/I/K : G
RF OUT CH 21-69 : 6 0
E N D:M E N U
7
00872A SV-2000M/xev-GB2 9/8/56 12:11 PM Page 18