User Manual

27
GB
Playing a CassetteReceiving Stereo Broadcasts
26
GB
3
4
4
This function enables you to play back any pre-recorded cassette.
1 Switch on both the television and your VCR.
2 Select the television AV or AUX input.
3 Insert the video cassette to be played. If the safety tab on the
cassette is intact, press the PLAY ( ) button.
Otherwise, the cassette is played automatically.
➢ When a cassette is loaded, the tape position is optimized
automatically to reduce disturbance (Digital Auto Tracking).
When playing a cassette, if the end of the tape is reached,
the cassette is rewound automatically.
4 To: press:
stop the playback STOP ( ).
eject the cassette EJECT ( ).
NICAM
The VCR can receive and record stereo broadcasts.
The VCR records the same audio on both the Hi-Fi linear tracks on
the tape.
1 Press the AUDIO button on the remote control or AUDIO OUT
button in the front panel to select stereo.
You can also select left, right or mono.
2 When the stereo sound is poor, press the AUDIO button to select
mono for sound without noise.
NICAM programs are divided into 3 types. NICAM Stereo, NICAM
Mono and Bilingual (transmission in another language). NICAM
programs are always accompanied by a standard mono sound
broadcast and you can select the desired sound. Please refer to
page 31.
1 Press MENU on the remote control.
Result: The MAIN menu is displayed.
2 Press the corresponding , or , buttons to select the
USER SEToption.
3 Press the OK button to select this option.
Result: The USER SETmenu is displayed.
4 Press the corresponding or button, until the cursor is
placed in front of the N I C A M option.
5 To select... Press or , until...
Mono mode O F F is displayed.
OFF: Only set at this position to record the
standard mono sound during a
NICAM broadcast if the stereo sound
is distorted due to inferior reception
conditions.
NICAM mode O N is displayed.
ON: Normally set at this position.
6 On completion, press the MENU button twice to exit the menu.
➢ NICAM is the stereo broadcast system of some countries.
(Ex.: U.K., SPAIN, --)
➢ If the stereo broadcast system of your country is not NICAM,
the SV-2000M can not receive NICAM.
STEREO 1 3
L, R (stereo)
➝
L
➝
R
➝
L+R
The Fine Adjustment feature enables you to adjust the alignment
manually to obtain the best possible picture.
When noise bars or streaks appear during playback or slow motion or still
picture, adjust alignment manually by pressing the TRACKING ( or )
buttons until the picture is clear and stable.
Result: ◆ The tracking bar appears.
◆ The image is adjusted.
◆ The tracking bar disappears when you release the button.
Adjusting Picture Alignment Manually
O S D : O N
TAPE SELECT :E 1 8 0 /
T 1 2 0
COLOR SYSTEM : A U T O
I P C : O N
N I C A M : O N
E N D:M E N U
O K E N D:M E N U
USER SET
00872A SV-2000M/xev-GB3 9/8/56 12:12 PM Page 26