User Manual
33
GB
32
GB
Playing a Sequence Frame by Frame
You can:
◆ stop the cassette at a given frame (image) ; and
◆ advance one frame at a time.
➢ No sound is heard when playing back frame by frame.
1 Press the PLAY ( ) button to start playing the cassette.
2 Press the P/Still button ( ) to stop the tape at a given frame.
3
Press the P/Still button ( ) again to advance forward frame by frame.
4 Instead of Step 3 you can also turn the JOG to the left or right to
advance frame by frame backward or forward.
5 To return to normal playback, press the PLAY ( ) button.
☛ If the Frame-by-Frame function is used for more than five
minutes (except for JOG function), the VCR will auto-
matically play to protect the cassette and video heads.
You can vary the playback speed using the Shuttle function (up to
nine times the normal speed).
Example: You wish to analyse an athlete’s technique, movement
by movement.
The Shuttle function is available on the remote control.
➢ No sound is heard when playing a sequence at variable
speeds.
1 Press the PLAY ( ) button to start playing the cassette.
2
Turn the SHUTTLE RING to the left or right to vary the playback speed.
3 Each time you turn the shuttle ring, the speed will change as
shown in the following illustration.
☛ When you activate Variable Speed play, there will be no
color in some modes. This is normal operation. Modes
with no color are shown below.
◆ No color modes : • Variable Speed play of LP recordings
on any system.
☛ If the picture is noisy or distored during X2 play or other
variable speed play mode, adjust the tracking
manually for a cleaner picture.
Playing a Sequence at Variable Speeds
Searching for a Specific Sequence
(LP on PAL/SECAM/MESECAM)
REVERSE
X9
REVERSE
X
7
(SP on All Systems)
(SLP on NTSC)
REVERSE
X3
REVERSE
PLAY
REVERSE
SLOW
(1/5)
SLOW
(1/5)
SLOW
(1/10)
PLAY
PLAY
X2
PLAY
X7
PLAY
X9
REVERSE
X15
REVERSE
X9
REVERSE
X5
REVERSE
PLAY
REVERSE
SLOW
(1/5)
SLOW
(1/5)
SLOW
(1/10)
PLAY
PLAY
X2
PLAY
X9
PLAY
X15
REVERSE
X15
REVERSE
X9
REVERSE
X7
REVERSE
PLAY
REVERSE
SLOW
(1/5)
SLOW
(1/5)
SLOW
(1/10)
PLAY
PLAY
X2
PLAY
X9
PLAY
X15
REVERSE
SLOW
(1/10)
STILL
STILL
STILL
REVERSE
SLOW
(1/10)
REVERSE
SLOW
(1/10)
1
2,3
4
2
2
4
INDEX: --
1
3
3
INDEX: - 1
Each time you record a cassette on this VCR, an “index” is
automatically marked on the tape when recording starts.
The Search function enables you to fast-forward or rewind to a
specific index and start playback from that point. Depending on the
direction selected, the indexes are numbered as follows.
etc.
Prev
Seq.
Seq. being
played
Next
Seq. etc.
2 1 1 2
➢ This VCR uses a standard indexing system (VISS). As a
result, it will recognize any indexes marked by other
VCRs using the
same system and vice versa.
1 To search for a specific index, press the INDEX button.
2 Press
or
buttons depending on the direction where your
desired programme is located. Each time you press the
or
buttons, the number decreases or increases respectively.
Result: The index number is displayed.
3 The VCR starts to search for the point you specified with the
or
buttons.
Result: When the index is found, cassette playback starts.
➢ You can set an index number up to ±20.
00872A SV-2000M/xev-GB3 9/8/56 12:12 PM Page 32