VIDEO CASSETTE RECORDER SV-635X SV-631X SV-6315X SV-6313X SV-530X SV-435X SV-431X SV-235X SV-231X SV-2315X SV-2313X Instruction Manual www.samsungvcr.
About this manual Contents GB Thank you for purchasing a Samsung Video Cassette Recorder (VCR). Your Owner’s Instructions contain much valuable information on setting up and using your VCR. Please take the time to read them as they will help you take full advantage of your VCR’s features. ◆ FOREWORD ■ Safety Instructions .........................................................................................
Contents (cont.) Safety Instructions GB The following illustrations represent precautions. ◆ PLAYING BACK Playing a Cassette......................................................................................... Adjusting Picture Alignment Manually ........................................................... Intelligent Picture Control ..............................................................................
Infrared Remote Control (SV-635X) Front View of the VCR SV-435X/SV-235X GB SV-635X STANDBY/ON BUTTON EJECT BUTTON VIDEO CASSETTE COMPARTMENT RECORD BUTTON REW BUTTON F.F BUTTON VCR STANDBY/ON TV STANDBY/ON VCR STANDBY/ON BUTTON TV STANDBY/ON BUTTON SLOW SLOW BUTTON TV TV BUTTON SHUTTLE SHUTTLE BUTTON VCR VCR BUTTON STANDBY/ON EJECT EJECT STANDBY/ON REW VIDEO AUDIO VIDEO PLAY F.
Display Indicator Deciding How to Connect Your VCR GB You must take into account various factors when connecting audio or video systems: ◆ Types of connectors available on your systems 2 1 ◆ Systems connected permanently to the VCR (satellite receiver for example) or temporarily (camcorder for example) 4 3 Your VCR is equipped with the following connectors.
Connecting Your VCR to the TV using the Coaxial Cable Connecting a Decoder for scrambled PAY TV broadcasts GB To receive television programmes a signal must be received from one of the following sources: ◆ ◆ ◆ ◆ ORTIE D AUDIO ☛ G TV 2 An outdoor aerial An indoor aerial A cable television network A satellite receiver Aerial DECODER TV AV1(EURO AV) 3 Make sure that both the television and the VCR are switched off before connecting the cables.
Connecting Your VCR to the Satellite receiver or Other Equipment Plug & Auto Set Up GB You can connect your VCR to the Satellite receiver or other VCR using the SCART cable if the appropriate outputs are available on the equipment chosen. The following illustrations give a few examples of the connection possibilities. 1. AV1(EURO AV): By means of 21-pin Scart Cable Plug the SCART Cable with satellite receiver or other equipment into the AV1(EURO AV) socket on the rear of the VCR.
Tuning Your Television for the VCR ★(SV-631X/SV-6315X/SV-6313X/ SV-530X/SV-435X/SV-431X/SV-235X/ SV-231X/ SV-2315X/SV-2313X) ★(SV-635X) STANDBY/ON VCR STANDBY/ON 2 You must tune your television for the VCR only if you are not using a Scart cable ➢ 1 Switch on the television. 2 Switch on the VCR by pressing STANDBY/ON on the front of the VCR or VCR STANDBY/ON (STANDBY/ON) on the remote control. 3 Select a programme position on the television to be reserved for use with your VCR.
Inserting Batteries in the Remote Control GB You must insert or replace the batteries in the remote control when you: ◆ Purchase the video cassette recorder 1 ◆ Find that the remote control is no longer working correctly 1 Push the tab in the direction of the arrow to release the battery compartment cover on the rear of the remote control.
Displaying/Hiding On-Screen Information Setting the VCR Output Channel GB Your VCR displays most information both on the VCR and the television. ★(SV-635X/SV-631X/SV-6315X/SV-6313X) You can choose to display or hide this information on the television screen (except for the Index, Programming MENU and Showview ★(SV-635X/SV-530X/SV-435X/SV-235X only) function, which cannot be hidden).
Presetting the Stations Automatically Presetting the Stations Manually ☛ ➢ ☛ PROG OPTIONS INSTALL INSTALL CLOCK BONUS LANG INSTALLAZIONE " ❷!!➛❿!! OK USCITA: MENU You do not need to preset the stations if you have already set them automatically (see Plug & Auto Set Up on page 13). Your VCR contains a built-in tuner used to receive television broadcasts. You must preset the stations received through the tuner.
Clearing a Preset Station Changing the Preset Station Table GB If you have stored a TV station: You can rearrange the preset TV stations according to your own preferences programme number assigned to the station. ◆ That you do not require ◆ At the wrong programme position PROG OPTIONS CLOCK BONUS INSTALL INSTALL " ❷!!➛❿!! OK 3 Press the OK button to select this option. Result: The INSTALLAZIONE menu is displayed.
Setting the AV2 Connection Selecting the Cassette Type GB If you wish to use the AV2 socket for a PAY TV DECODER, you must change AV2 to the required position. ★(SV-635X/SV-631X/SV-6315X/SV-6313X) INSTALL SINTONIA AUTOMATICA SINTONIA MANUALE STANDARD TV :G CANALE VCR OUT :CH36 ❿ SELEZIONE AV2 :DEC " ❷ ❿ USCITA: MENU ★(SV-530X/SV-435X/SV-431X/SV-235X/ 1 Press MENU on the remote control. Result: The programming menu is displayed. 2 Press the corresponding " , INSTALLAZIONE option.
NICAM ★(SV-635X/SV-631X/SV-6315X/SV-613X Only) Protecting a Recorded Cassette GB OPTIONS MENU DURATA NASTRO NORMA COLORE IPC 16:9 ❿ NICAM " ❷ ❿ :SI :E180 :AUTO :SI :AUTO :SI USCITA: MENU NICAM programmes are divided into 3 types. NICAM Stereo, NICAM Mono and Bilingual (transmission in another language). NICAM programmes are always accompanied by a standard mono sound broadcast and you can select the desired sound. Please refer to page 34. 1 Press MENU on the remote control.
Recording a Programme with Automatic Stop This function enables you to record up to nine hours of programmes. (LP) Your VCR stops automatically after the requested length of time. 3 DISP./ DISPLAY 4 U Switch on the television.
Using the ShowView Feature ★(SV-635X/SV-530X/SV-435X/SV-235X Only) GB Before presetting your VCR: ◆ Switch on both the television and your VCR ◆ Check that the date and time are correct ◆ Insert the cassette on which the programme is to be recorded (safety tab intact) DI O RE TV/VCR D EE SP 1 Up to six programmes can be preset. 1 Press the SHOWVIEW button. A message is displayed to allow you to enter the Result: ShowView code.
Modifying ShowView Programming ★(SV-635X/SV-530X/SV-435X/SV-235X Only) If you wish to correct the programme displayed or modify certain elements, such as the recording speed, you can do so before you press MENU a second time to confirm. Using the Quick Programming Feature 1 If you wish to... Select an input source other than the tuner AV1, AV2 or AUX ◆ Press the ➛ or ❿ buttons, until the PR selection flashes. ◆ Press the INPUT button one or more times to change the input source selection.
Checking a Preset Recording Playing a Cassette GB You can check your preset recordings: This function allows you to play back any pre-recorded cassette. SP ◆ When you have finished presetting the VCR PROG PROG OPTIONS INSTALL CLOCK BONUS LANG ◆ If you have forgotten which programmes will be recorded 1 Switch on both the television and your VCR. 2 Insert the video cassette to be played. If the safety tab on the cassette is intact, press ❿II. Otherwise, the cassette is played automatically.
Intelligent Picture Control ★(SV-635X/SV-631X/SV-6315X/SV-6313X) OPTIONS MENU DURATA NASTRO NORMA COLORE ❿ IPC 16:9 NICAM ❿ # ❷ :SI :E180 :AUTO :SI :AUTO :SI FORMAT 16:9 (WIDE SCREEN) The Intelligent Picture Control Feature allows you to adjust the sharpness of the image automatically, according to your own preferences. 1 During playback, press the MENU button on the remote control. The programming menu is displayed. Result: 2 Press the corresponding FUNZIONI option.
Selecting the Audio Output Mode ★(SV-635X/SV-631X/ SV-6315X/SV-6313X/SV-530X Only) Playing a Cassette in Slow Motion GB You can select the mode in which the sound is reproduced on the loudspeakers and AV outputs. The following options are available. PEAT MENU AU DI O C RE TV/VCR D EE SP L R LR MIX Option You can play a cassette in slow motion. ➢ Description L Used to listen to the sound on the left Hi-Fi channel. R Used to listen to the sound on the right Hi-Fi channel.
Playing a Sequence at Variable Speeds You can vary the playback speed using the Shuttle function (up to nine times the normal speed). Example: You wish to analyze a sportsperson’s technique, movement by movement. SLOW SHUTTLE ➢ D 1 1 1 1 Press MENU on the remote control. Result: The programming menu is displayed. 2 Press the corresponding 2 3 Press: ◆ ◆ ◆ / S No sound is heard when playing a sequence at variable speeds.
Connecting an RCA Audio/Video Input Cable ★(SV-635X/SV-631X/ SV-6315X/SV-6313X/SV-530X/SV-435X/SV-235X Only) Using the Tape Counter GB The tape counter: ◆ Indicates the elapsed time in the play and record modes (hours, minutes and seconds) ◆ Is reset when a cassette is inserted in the VCR ◆ Allows you to find the beginning of a sequence easily ☛ If the remaining time is to be calculated correctly, you must indicate the type of cassette being used.
Using the Assemble Edit Function This function allows you to start a new recording at a specific position on the cassette while maintaining a very smooth scene change. SP 2 1 Insert the cassette to be edited in your VCR. 2 Press the ❿ll button to start playback. 3 When you reach the position from which you wish to start the new recording, press the❿ll button. OK 4 5 6 F.ADV Press the F.
Using the TV Buttons on the Remote Control ★(SV-635X Only) Auto Power Off GB Your VCR remote control will work with Samsung televisions and compatible brands. VCR STANDBY/ON TV STANDBY/ON To determine whether your television is compatible, follow the instructions below. 1 SLOW SHUTTLE 2 TV 2 VCR 1 Switch your television on. 2 Point the remote control towards the television.
Technical Specifications Problems and Solutions GB Before contacting the Samsung after-sales service, perform the following simple checks. Design and specifications are subject to change without notice. Problem MODEL Format Heads SV-635X/SV-631X/SV-6315X/ SV-6313X/SV-530X VHS PAL standard Video: 4 rotary heads No power ◆ ◆ Check that the power plug is connected to a wall outlet.
TV Frequency Table (System-B/G) ELECTRONICS CITTA’ 002~012 :CCIR STD VHF 013~020 :ITALY 021~069 :CCIR STD UHF 071~075 :CCIR CABLE 201~241 :CCIR STD CABLE DISP CH Band Fp 002 003 004 005 006 007 008 009 010 011 012 013 014 015 016 017 018 019 020 021 022 023 024 025 026 027 028 029 030 031 032 033 034 035 036 037 038 039 040 041 042 043 044 045 046 047 048 049 050 051 052 053 054 055 056 057 058 059 V-L V-L V-L V-H V-H V-H V-H V-H V-H V-H V-H V-L V-L V-L V-H V-H V-H V-H V-H UHF UHF UHF UHF UHF UHF UHF U
CITTA’ RAGIONE SOCIALE INDIRIZZO TELEFONO LEGENDA FOLIGNO (PG) PERUGIA TERNI UMBRIA TECNOSERVICE SNC VIDEOLAB dI Tomassoni NUOVA CEA DI CARLONI VIA MANCINELLI 1/A VIA SILVIO PELLICO 13 VIA MONTEGRAPPA 9A/B 0742/344636 075/33154 0744/285841 TV/VCR/AUD TV/VCR/AUD TV/VCR/AUD AREZZO FIRENZE GROSSETO LIVORNO MARLIA CAPANNORI(LU) MASSA PIOMBINO (LI) PISA PISTOIA PONSACCO (PI) PORTOFERRAIO (LI) PRATO (PO) S.