User guide

SVMi-20i Administration Guide

2-41

Corret System Shutdown

Whenever possible one of the following procedures should be followed when shutting down

the SVMi-20i system and /or prior to shutting down the Telephone equipment.

Procedure One

1. From any phone on the system log into KMMC programming.

2. Using MMC 746 change the status of SVMi-20i from “PROC” to “HALT”.

3. The SVC LED on the front of the SVMi-20i will be turned off. It means it‟s safe to power

down the switch.

Procedure Two

From the Device Manager:

1. Select 8.7.4 Shutdown

2. Enter the System Administrator‟s password (Default = 0000)

3. The SVC LED on the front of the SVMi-20i will be turned off. It means it‟s safe to power

down the switch.

Procedure Three

1. From any phone on the system call one of the SVMi-20i ports or call the station group

5049 (OS 7400), 5039 (OS 7200).

2. If the SVMi-20i answers with “enter your password” press [*] to escape to the main menu.

3. From the main menu press [#][0000].

4. You will be again prompted to enter a password, enter the System Administrator‟s

password (Default = 0000).

5. You will be prompted with “System Administration Menu” and a list of functions you can

perform. It will not be spoken, but you can enter a hidden option [4] to shut down the

system.

6. Again you will be asked to enter a password, enter the System Administrator‟s password

(Default = 0000)

7. The system will now shutdown. The SVC LED will be turned off. It means it is safe to

power down the switch.