User guide

3-66

Item

Description

Default

Language

This sets the default operating language of the system.

Key Code

The key code is the digit entered by the caller and used by the

SVMi-20i to identify a language selection. This key code is used in

a language selection menu and it must be built specifically for your

application.

Select

Language

In order to install a language, select the prompt to load and press

save button. The installed prompts will be displayed in the list. If

the prompts that you want is not available, you have to upload it

via management interface or ftp. This will take a few minutes.

Thus, do not turn off the system until the upload is completed.

All language selection is based on the order of the defined languages in this page. If the

languages are to be re-ordered, a new language is to be added, or an existing language

is to be changed, then the action should be executed first before any mailbox language

options are set.

Email Gateway

The parameters set in the SMTP Server section on this page are used for sending mails to the

address set in the „Report:‟ field. This email gateway is used for sending error reports to the

on-site or off-site system administrator. These SMTP server parameters are NOT used for

subscriber E-Message Delivery and/or Notification. See MCLASS SMTP Server settings for

use with individual or groups of subscribers.