LCD Monitor Owner's Manual

Image Setup
z Coarse : Removes noise such as vertical stripes.
Coarse adjustment may move the screen image area.
You may relocate it to the center using the Horizontal Control
menu.
z Auto Setup : Auto adjustment allows the monitor to self-adjust
to the incoming video signal. The values of fine, coarse and
position are adjusted automatically.
Position
Adjusts the screen location horizontally and vertically.
Sharpness
Changes the clearance of image.
O
p
tion Tab Definition
You can configure MagicTune™ using the following options.
Preferences
Loads the Preferences Dialog Box. Preferences in use will have an
"V" in the check box. To turn on or off any Preference, position the
cursor over the box and click.
z Transparency
z Enable task tray menu .
- To access the MagicTune™ menus, click the icon on the [task
tray menu].
The menus are not displayed if the [Enable System Tray] is
deselected in [Options] ' [Basic Settings].
Source
Select
z Analog
z Digital
Color
Weakness
This refers to the process that optimizes the color and maintains the
optimized color.
z Off - To cancel Partial Color Blindness Mode.
z Custom - Partial Color Blindness Test
z Reset - To reset the monitor settings to the factory defaults.
PIP
When external A/V devices such as VCRs or DVDs are connected to
the monitor, PIP allows you to watch video from those devices in a
small window super-imposed on the PC Video signal. (Off / On)
PIP
Turn the PIP Screen on or off.
Source
Select the input source for the PIP.
Size
Change the Size of the PIP window.
Position
Change the Position of the PIP window.
Customized
Applied only in specific monitors.
Changing languages in MagicTune™ will be applied to monitor OSD
(On Screen Display) languages.OSD language will be changed to
current language settings of MagicTune™ .
MagicBright
Set Customized Key to MagicBright.