manual do usuário

28
English
Basic Features
¦ Sound Settings
O MENU m → Sound → ENTER E
Broadcast Audio Options
■ Audio Language (digital channels only): Change the
default value for audio languages.
✎ The available language may differ depending on the
broadcast.
■ Multi-Track Sound (MTS)
t
(analog channels only)
– Mono: Choose for channels that are
broadcasting in mono or if you are
having difficulty receiving a stereo
signal.
– Stereo: Choose for channels that are
broadcasting in stereo.
– SAP: Choose to listen to the Separate Audio
Program, which is usually a foreign-language
translation.
✎ Depending on the particular program being broadcast,
you can listen to Mono, Stereo or SAP.
SPDIF Output
SPDIF (Sony Philips Digital Interface) is used to provide digital
sound, reducing interference going to speakers and various
digital devices such as an A/V Receiver/Home theater.
■ Audio Format: You can select the Digital Audio output
(SPDIF) format.
✎ The available Digital Audio output (SPDIF) format
may differ depending on the input source.
■ Audio Delay: Correct audio-video sync problems, when
watching TV or video, and when listening to digital audio
output using an external device such as an AV receiver
(0ms ~ 250ms).
Speaker Settings
■ Speaker Select (External Speaker / TV Speaker): A
sound echo may occur due to a difference in decoding
speed between the main speaker and the audio receiver.
In this case, set the TV to External Speaker.
✎ When Speaker Select is set to External
Speaker, the volume and MUTE buttons will not
operate and the sound settings will be limited.
✎ When Speaker Select is set to External
Speaker.
– TV Speaker: Off, External Speaker: On
✎ When Speaker Select is set to TV Speaker.
– TV Speaker: On, External Speaker: On
✎ If there is no video signal, both speakers will be
mute.
■ Auto Volume (Off / Normal / Night): To equalize the
volume level on each channel, set to Normal.
Night: This mode provides an improved sound
experience compared to Normal mode, making almost
no noise. It is useful at night.
Reset Sound (OK / Cancel)
Reset all sound settings to the factory defaults.
Setting the Time
O MENU m → System → Time → ENTER E
Time
■ Clock: Setting the clock is for using various timer
features of the TV.
O The current time will appear every time you press
the INFO button.
✎ If you disconnect the power cord, you have to set
the clock again.
Clock Mode (Auto / Manual)
– Auto: Set the current time automatically using the
time from a digital channel.
✎ The antenna must be connected in order to set
the time automatically.
– Manual: Set the current time manually.
✎ Depending on the broadcast station and signal,
the auto time set up may not be correct. In this
case, set the time manually.
Clock Set: Set the Day, Month, Year, Hour, Minute
and am/pm.
✎ Available only when Clock Mode is set to
Manual.
✎ You can set the Day, Month, Year, Hour and
Minute directly by pressing the number buttons
on the remote control.
MTS