Ow er's instructions ol=ggtlo,leegt_ Register your product at www.samsung.
important Regarding Viewing Standard screen primarily dcsigned them should Displaying Warranty Television format tclevis[ons to vicw primarily bars tclev[sion viewing standard graphics (wide screcn pcr &'signed them should of the screen full-motion 4:3 ratio images video. foi-mat on screen, should such be limitcd Additionally, (16:9, the aspect be in the wide screen video and programming, viewing programming burned-in O, patterns on and bottom 15% or expanded moving.
A Guide What to is Digital Digital TV Television? Digital television (DTV) is a new wa), of transnfitting high quality video and audio to vourj TV set. Using DTV, broadcasters can transmit high defnition TV (HDTV) images, Dolby Digital surround audio, and new services such as multicasting (transmitting more than one program on the same TV channel) and datacasting (providing electronic program guides and interactive television). Several of these services can be combined into a single digital broadcast.
How There to are three a bui|t-in receiver ways digital component personal integrated Digita| to watch te|evision to a DT_Uready wideband with View computer TVs DT_Z The tuner. The television video (PC) versus Television first is to use an integrated second or monitor. and stcrco tuner audio cards DTV-ready and is to connect This type inputs.
Q&A 3. is the antenna I use for existing TV reception good enough for DTV? Over-the-air (OTA) digital TV broadcasOng uses the same channels as analog TV and works well with many existing TV antennas. However, DTV broadcast channel assignments are different than analog channels. Ybu should find outt whether your local DTV broadcasts are on _ff-iF (channels 2-13) or UHF (channels 14-69) to see if you need a different antenna.
I CONTENTS Chapter I 1- Your List of Foatures New TV ................................ 8 .......................................................................................... S 8 9 9 Checking Accessories ................................................................................ Familiarizing Yourself with the TV ............................................................. Control Buttons ..............................................................................
CONTENTS Chapter I 3: Operation .................................... 36 Sound (2ontrol ......................................................................................... 36 Adjusting the Volume ................................................................... Using the MUTE Button ............................................................... Using Automatic Sound Settings ................................................... Custonfizing the Sound .............................................
Your NEW List of TV Features Y\+ur TV is designed wRh the latest technolog}t includes the following special features: • Easy-to-use remote • Easy-to-use on-screen umt that control menu system • Automatic timer to turn the TV on and off • Ac!)ustable picture and sound ° Automatic channel tuning settings or eliminate ° A built-in sound multi-channel dual channel that can be stored in the TV_ memory %1"up to 181 channels • A special filter to reduce • Built-in, This TV is a high-p
Your NE\V TV I Familiarizing Control with the TV Buttons _2)u can control advanced Yourself your R'aturcs, TV_ bask" k'aturcs, you must including usc thc rcmotc thc on-scrccn mcnu. To use thc morc control. f O SOURCE Remote Press to change between viewing TV programs and signals from other components. Aim the remote control towards this spot on the TV. O MENU Press to see an on-screen menu ofyourTV's features. 0 + VOL Press to increase or decrease the volume.
Your NEw Connection TV Jacks ] (Side) _\_u can connect an A/V component that is used only occas[onall% such as a camcorder or video game. (For information on connecting equipment, see page 18.) [= .......................... ,,J , Please be sure to match the color coded input terminals and cable .jacks. O S-VIDEO Input Connect an S-Video signal from a camcorder or video game. O VIDEO Input Connect a video signal from a camcorder or video game.
Your NEW Connection TV I Jacks (Rear) Us(" the rear panel jacks to connect an A_ 7component continuousl> such as a VCR or a DVD player. that will be connectcd For more information on connecting equipment, see pages 13-20. ANT 1 IN {AIR) 0 i i i 1 I f I , i ........................... {CABLE} i • Please be sure to match the color coded input te*-mmals and cable.jacks. O Audio-Video Output jacks Connect to the audio/video input jacks of a recording VCR.
Your NEw Remote TV ] Control _\_ctcan use the remote control up to about 23 feet from the T_£When using the remote, always point it directly at the TX£ • This is a special remote control for the visually impaired, and has Braille points on the Power, Channel and V{>lun,ebuttons. O {} POWER TurnstheTVon andoff. Number buttons Press to select channels directly on the TV. _]) INFO Press to display information on the TV screen.
INSTALLATION Connecting VHF and UHF Antennas If your antenna has a set of leads that look like this, see Antennas with 300-ohm Flat "FwmLeads" below. If your antenna has one lead that looks like this, see 'Antennas with 7%ohm Round Leads" on page 14. If you have two antennas, see Separate VHF and UHF Antennas" on page 14.
INSTALLATION Antennas with ] 75-ohm 1 Round Leads A/'Z,a_'N Plug the antenna lead into the I"ANT ! !N (AIR)'I terminal on the rear panel (CABLQ Separate VHF and UHF ] 1 Antennas If you have two separate antennas for your TV (one VHF and one UHF), you must combine the two antenna signals before connecting the antennas to the T_ This procedure requires an optional combine>adapter (available at most electronics shops). Connect both antenna leads to the combiner.
INSTALLATION [ Connecting Cable TV To connect to a cable TV system, follow thc instructions below. Cable without a Cable Box Plug the incoming cable into the _!ANT2 !N (CABLE)" terminal onthe rear panel, Connecting to a Cable Box that Descramb|es 4 1 Findthe cabl_ that is connected to the ANTENNA 0UTterminal or your came BOX Cable Box _MI Connect the other end of this cable to the "ANT 2 IN {CABLE)" [ermmal on me rear eanel.
INSTALLATION Connecting ] to a Cab|e Box that Descramb|es Some Channels If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of coaxial cable. (These items are available at most electronics stores.) 4 This terminal might be labelled 'ANT IN,'VHF1N orsimply, 'IN. 1 Find and disconnectthe cable that is connec_ea to the ANTENNA IN _1_ ANTENNA ,N terminal on your came BOX.
INSTALLATION [ Connecting These instructions a VCR assume TV system (according • Please be sure that you have to the instructions to match the color coded already connected input your TV to an ah" or a cable 13-16). on pages tet-minals 1 and cable jacks.
INSTALLATION Connecting ] a Second VCR to Record from the TV Y\ ur T_7 can send octt signals of its picture and sound to be recorded by a second VCR. To do this, connect your second VCR as follows: 1 TV Rear Panel Connect a set of audio cames between the "AV OUT (L, R)" jacks on the TV and the AUDIO IN jacks on the VCR. The VCR inpu_ a ks might be, c.
INSTALLATION [ Connecting a DVD Player The rear panel jacks on your TV make it easy to connect a D_vq)player to your T_< • Please be sure to match the color coded input terminals and cable .jacks. Connecting to Y, PB, PR 1 TV Rear Panel Connecta set of audiocablesbetweenthe "COMPONENT IN (L,R)"jacksonthe TVandthe AUDIOOUTjacksonme DVDplayer, 2 Connecta set ofvideo canes betweenme "COMPONENT IN IY.
INSTALLATION Connecting ] a Digital Audio Thcre arc many types/)f digital audh) systems/m System the market t/)da)_ A sm_plifk.d illustrati/m/)f an audio system is shown audio system owner's manual. below. For more infomlation, see your TV Rear Panel !f youraudiosystemhas aoptical digitalaudioinput, ¢0nnect to the ::BI61TAL AUDI00UT(0PT!CAL)"jack ICABLF} Digital Audao In_u_ Optical _ Cable System .
INSTALLATION installing [ Batteries in the Remote Control 1 *he remotecontrolupward asshown inthe figure, Uf**he cover atth0 back of 2 , Makesur_' tomat,'h t'l_: ÷' aud Installtwo AAA size batteries, diagram inside fine compartment. '--' ends of tile batteries with tile 4 Close tile cover as shown in { the figure, / Remove tile batteries aucl store them in a _ool, dry place if you won't be using tile ]'emote control for a long time.
OPERATION Turning the TV On and Off Press the POWER button on the remote control. You can a!s0 use the POWER P|ug & P|ay button on the front pane!. Feature When the TV is initially powered On, basic customer settings proceed automatically and subsequently: Setting the language, Antenna input check, Channel Memorize and Tm_e Setting. • The Plug & Play function operates alter plugging in the TV for the first time. 4 Plug & Play feature is available in the TV and DTV mode only.
OPERATION I 4 Press [r .=_ or Y buttor to select tl" _=desired conlleclion, Press the ENTERbutton to memorize the channels of tile selected connection First analog, then digital channels will be memorized. When selecting Cable TV: Press the A or "_' Bettor to select "Cable". ther cress the ENTERbuEon. "Cable System" is displaved Press me A or Y bettor to select "STD". " HRC". or "]RC". men 3ress the ENTER button. Press the ENTERbutton to start. TheTV beg usmemorizing all available channels.
OPERATION 1 4 Refer to 'Setting the Clock" on page 39. 5 Pressthe 4or _ button to mo_atothe hour or minute. Setthe clock by pressing the at or V button, then press me MENU buEon. Even if the ENTER button is not pressed, the message will automatically disappear after several seconds. 6 The message "Enjoy your watch ng." is displayed. Wl _an you have finisheu.
OPERATION I Viewing Viewing the the Menus and On-Screen Disp|ays Menus 1 With the Dower on. Dress the MENU button Input The "Input" menu appears Ollthe screen. Its left side has five icons: Inout. Picture. Sound. Channel. and Setup. Move (_ Enter ]33 Exit Press the A or Y button to select one of the five icons Then press me ENTERbutton to access the icon's sub-menu. 4 2 Press the A or T button [o move[o iema nflle manu tree icon '*\)ucan also use the MENU, VOL+/- and CHA/V buttons on th
OPERATION ] Selecting a Menu Language Setup Presslqe MENUbuEon. Press the A or Y button Csptl,a_ m select "Setup", then press the ENTERbuttor € Move ['3' Enter 2 1_ Return Language Pressthe*torTbu#on xoselect"Language', then oressthe ENTER bu_or Press the at or Y button to select "English" "EsaaSd". or "Fran_ais", then Dressthe ENTER but[or € Move 2_ Enter g]] Return Press the EXIT button to exit. Selecting _\_u can connect the to two Antenna different signal input sources by choos
OPERATION I Memorizing the Channels Your TV can nlemorize and store all of the available channels for both 'off-air" (antenna) and cable channels. After the available channels are memorized, use the CH A and CH V buttons to scan through the channels. This eliminates the need to change channels by entering the channel digits. There are three steps for nlemodzing channels: selecong a broadcast SOUR'e,memorizing the channels (aMtomaOc) and adding and deleting channels (manual).
OPERATION Storing ] Channe|s in Memory 4 PresstheAorYbu_o_ to selectthe an[enna connec[ion, then Dressthe ENTERbu_on, First analog, then digital cnannels will be memorized. When selection Cable TV: Pressthe&orYbu_o_ to select"Cable'.then uress the ENTERbutton. PressmeAorYbu_o_ to select"STD _ "" 4RC". iii_i i i iI iii i_i_i_i_i_i_i_i_ _ii_/_ i _ i_iiii_ i_iii ii ii ii ii ii ii ii ii_ or "lRC".then press me ENTERhuron. Pressthe ENTERbuttontc s[arr, TheTVbegins memorizing all a_ailable channels.
OPERATION [ Alternate method: Simply nress the AUTO PROB. button or the remo[e control 1c merr 3rlz£ the channels reel]u, , All available channels are atltomatically the direct tuning function. stored m memory when channels are selected by , The TV must be connected to an antenna m order to receive TV signals. Even if a particular channel is deleted trom the memory, you can always tune to that channel directly by using the number buttons on the remote control.
OPERATION Adding ] and Erasing Channels To add channels that we_e not memorized (o__to delete unwanted channels from memory): 1 Channel Press the MENU button. Press me A or Y button be_e To_ to select "Channel", then press the ENTERbutton. Move 3' Enter 2 PresstheA. orYbu_on to select"Add/Delete". tllen oressthe ENTER butter Press the A or Y eurmn to select the desired channeh men Dressdie ENTERbutton.
OPERATION [ Changing Using the Channe|s Channel Pressthe CH,z\ or CHV Buttons buttelt to changechannels, W'hen you press CH A o1"CH V, the TV changes channels in sequence. You will see all the channels that the TV has memorized. (The TV must have memorized at least three (hannels.) You ,,','ill not see (hannels that ,,','ere either erased or not memorized. Using the Number Buttons Use the number buttons to quickly tune to any channel.
OPERATION Labelling ] the Channels Use this feature to assign an easy-to-remember label to any channel (i.e., CBS", ESPN", PBS2", CNN 1", etc.). A label consists of four fields, where each field is a letter, a number or a blank. When the |NFO button is pressed, the channel label will appear next to the channel number. 1 Channel Press th_ MENU button. Y Press the _, or Y button to select "Channel '. then press me ENTERbutton Move 2 Press the A o_Y button to select "Name".
OPERATION Picture _)u I Contro| can select the type of pk'ture Using Automatic whk'h Picture best corresponds to your viewing requirements. Settings Your TV has automatic picture settings (_Dynamic", 'Standard", and Movie") that are preset at the factor}: You can activate either Dynamic, Standard, or Movie by making a selecoon from the menu. Or, you can select '%ustom" which automatically recalls your personalized picture setOngs.
OPERATION Customizing ] the Picture You can use the (m-screen menus to chan,_e_ the '_Contrast", Brightness", Color", :'Tint", and :'Color Tone" according to personal pretcrence. '_Sharpness', 1 Press the MENU button. Press the A or Y button to select "Picture" titan press the ENTERbutton ._Move _ Enter [m Return 2 Press the ENTERbutton to select "Mode"• Press the ENTERbutton again. Press me A or V button to select a particular item {"Dynamic", "Stan Jard".
OPERATION I 5 PreSsthe at OrT button to select '!Color Tone'; than press the ENTER button Press the at er Y button to select a particular item {"Co012'!; "Cool1'<, "Normal"; '{Warm1!'; or ges_t # Move _ Enter !'Warm2'), then press the ENTERbutton. Resetting the Picture Settings to 6 the Factory Mode Pressthe at or Y button to smect 'Reset". then oress the ENTERDuemn. The reset funct on for each moue IS eel ("Dynamic". "Standard", "Movie". or "Custom" }.
OPERATION ] Sound Control Adjusting the Volume Press the VUL+ or VOL - buttons to iecrease or decrease the VOIUIIIB, Using the MUTE Button At any tin*e, yo/.t can temporarily cut off the sound using the MUTE button. 1 Press tile MUTE button and the sound cuts off. It :+, /A _ "eX" is dlspiavee. /_CH,\°° VOL Toturn mute off Dress me MUTE buttoe again, or press either file VOL + or VOL - button.
OPERATION Using I Automatic Sound Settings Y\mr TV has automatic sound settings (%tandard", '_Music", '_Movie",and Speech") that are preset at the factory You carl activate either Standard, Music, Movie or Speech by making a selection front the menu. Or, you can select "Custom," which automatically recalls your person_flized sound settings. 1 Sound Jl_ Press the MENU butter Press the A.
OPERATION Customizing ] the Sound Thc sound scttings can bc acljusted to suit your pcrsonal prck'rcnccs. (Alternativel> you can use one of the automatic settings. See page 37.) 1 _ Sound Pressthe MENUbutton. Press the A or Y button to select "Sound".
OPERATION Setting Setting I the Clock the clock is necessary m orck, r to use thc various timer features of thc T_ Also, you can check the time while watching the T_ (Just press the INFO button.) 1 Press the MENU button Setup N Press the A or Y button to select "Setuo'. then Dress the ENTERDuEon. @) € :_J Move C_ Enter _3 Return 2 Press me A or Y button [o se=ect"Time". then oress the ENTERouEon.
OPERATION Viewing ] an E×terna| Signa| Source Use the remote control to switch betwcen v_cwing s_gnals h>m connectcd cquipmcnt, such as a VCR, DVD, set-top box, and the TV source (broadcast or cable). Inpul Press tee MENU button. Press the ENTERbutton to select "Input". Move _ Enter _ Return 2 Pressthe ENTERbutton to selec[ "SourceList". DTV &V1 Source ....... Llsl Press the a, or Y button to select the desirea signal source, then Dress the ENTERbutton.
OPERATION Assigning I Names to E×terna| |nput Mode 1 Press me MENU button Press the ENTERbutton zc select "Inapt" @ Move L_ Enter Z]3 Return Move _ Enter _ Return Move Q* Enter _ Return Presst_AorTbuRon to select "Edit Name". then pressthe ENTER DU_OR, 3 Press the A or Y button to select the signal source to be eal[eo, men Dress file ENTERbutton. € 4 Pressthe akor Y button to selec[ me desired external device (VCR,DVD, Cab e STB. Sat. STB.AV EdltName AV1 &V2 _V_de_ Receiver.
SPECIAL Fine FEATURES Tuning Channels Thc Fmc Tuning function lets you manually ad]ust the TV_ tuner if you havc difficulty tuning channels. 1 Channel Press the MENU button, Press the A or Y button to select "Channel". then Add/DeUe_ press me ENTERbutton, Move ¢Z_ Enter El] Return "q The syn'd)o] " * " will appear nexl to the name o[ the channels you have adjusted. 2 PresstheAorYbuRon [o select"Fine Tune" then Dressthe ENTER bu_or Press me 4 or D,,butto_ [o aojust the fine tuning.
SPECIAL EEATURES I Checking the Digita|=Signa| Strength Unlike analog channels, which can vary in reception quality from ' snox_ e' to clear, digital (HDTV) channels have either perfect reception quality or you will not receive them at all. So, uNike analog channels, you cannot fine tune a digital channel. You can, however, acljust your antenna to improve the reception of awtilable digital channels. 1 Channel Pres_ the MENU button. Pressthe A. or Y button to select "Channel".
SPECIAL EEATURES Changing ] the Screen Size 1 Picture Press the MENU button. Press theA or V button to select "Picture". then press the ENTERbuttor Move 2 _ Enter [m Return Pressme ,& or Y button to select "Size". then Picture _ Picture press the ENTERbutton Size Press the _. or Y button to select the desired size. tllen eress the ENTER buttor _ _ _ Move _, Enter [m Return Press the EXIT button to exit Press the P.
SPECIAL EEATURES Digital I Noise If thc skgna] recckvcd reduce any static and Reduction by the tclcvksion ghosting that is weak, you can activatc may appea_ _ on the 1 Picture Press me MENU button Pres _the A or '_' button _o selec[ "Picture". then cress the ENTEReuEon, C_ Enter 2 Press me A or Y button m select Digital NR'. then press the ENTER 333 Return @ Picture S_ze : Norma_ Dl_,to, .R : euI[on Press the A or T button to se ect "On" or "Off".
OPERATION ] Tilt Due to the Earthg magnetic field there may be some minor image tilt depending on the TV_ location. When this occurs, follow the steps belo_ 1 Press the MENU button. Pressthe A or V bu[mn to select "Picture". then press the ENTERbu[[o_ @ Move C_ Ente_ rrrlReturn 2 PresstheAor_'bu_on to select"Tilt". Picture N Move 4_ Adjust EI] Return 3 Press the _ OrI_ button Picture Mode Dynamic to adjust the Tilt.
SPECIAL EEATURES Using the I R.Su Feature This feature allows you to set the TV to return to a particular channel after a certain amount of time. For example, you may be watching a channel when commercials start. Yi_ucan set the R.Surf to 5 minutes", then switch channels. After minutes, the TV will return to the original channel. To use the R.Surf feature: 1 While you are watching tire channelto which you ALTOPROG ADD/DEL MTS r CAP'ON Aaron TV/DTV _SURF TU£BO T_ j wan[ m return, press [Re R.
SPECIAL EEATURES Choosing Depending SAE ] a IVlu|ti-Channe| on the particular 1 progranl being Sound broadcast, J_ you (MTS) can listen to Mono, track Stereo, Sound Press the MENU button. kqu_llze_ M _S Press the A or Y button to select "Sound". tnen " Stereu press the ENTERbutton Move L@ Enter {_3 Return Move _ {_3 Return 2 Pressthe A orY button re select "MTS". tllen press the ENTERburror Press the ,tk or Y button to select one ofthe sezdngs,then press me ENTERbutton.
SPECIAL EEATURES Choosing I a IVluiti-Channei Sound (MTS) track The digital-TV transmission system is capable of simultaneous transmission of many audio tracks (for example, simultaneous translations of the program into foreign languages). The availability of these additional 'multitracks" depends upon the program. 1 Sound Press [he MENU button Press the at or V auttoJl to select "Sound". ther Dress the ENTERuuEon. Move C_ Enter 2 Press the at or V outtoJl to select "MTS'.
SPECIAL EEATURES ] Extra Sound Settings (Auto Volume, Pseudo Stereo, or Turbo Plus) The following sound settings can be acDusted to suit your personal preferences Auto Volume Each broadcasting station has its own signal conditions, which can make it necessary to aclluSt the vohtme every time the channel is changed.
SPECIAL FEATURES Setting the I On/Off Timer k%u must set the clock first. 1 Setup Press the MENU button o' 9 '!?Press the A or '!v butter to select "Setuo", then cress the ENTEReuEon, _ : ,_ _ )n Blue Scrca_ VC (_3_Enter Move Zl] Return "_ 2 Time Pressthe ,A. or T button to select "Time". then eress the ENTERou_mn, p : _ Tnrle_ cn_ni_l € Move : C_ Enter 3 Tn Return 3 Press m _ _ or '!_ button m select "On Timer'.
SPECIAL EEATURES Setting the ] Preferred Thc preferred TV socux:c, turns on the T'v_ Option channel and volume can bc set for when the timer automatk'ally 4 Press the to select A or Y "On Source" allen ENTER button. Press the to select "DTV', ENTER oressthe _, or Y "Air" then button Timer button "Cable". press or the euuon.
SPECIAL EEATURES Setting the I Sleep The sleep fime_ _ automatically Timer shuts off the TV afte__ a p_'eset time 1 (trom 30 to 180 mmutos). Setup Press me MENU kut_on Presstl __ A or V butter m selec[ "Setup", then cress the ENTERbutton. ii) CSPH_Fn CUl € Move @ Enter 33] Return 2 Time Pressthe A or T button mse ect "Time". then oress the ENTERouEon. Press the A or V button m se act "Sleep Timer". then press the ENTER out[on.
SPECIAL, IAnalog EEATURES ] Viewing Closed (On=Screen Text Captions Message) Yi_ur TV decodes and displays the closed captions that are broadcast with certain TV shows. These captions are usually subtitles for the hearing impaired or foreign-language translations. All VCRs record the closed caption signal from television programs, so homerecorded video tapes also provide closed captions. Most pre-recorded commercial video tapes provide closed captions as well.
SPECIAL EEATURES I "_ Different clnannels and fields 4 Depend ng ontne narticular broae :asL E Caption r2apHon : Ol'_ _ ..... Mode Channel : Captk_n :_ m_ghtbe necessary to make enanges re "Channel" ana "Field", € Pressthe ,A. or _' button to select "Char _el" or Move LTY Enter g]] Return re se oct "1" or "2",then uress tile ENTERButton.
SPECIAL EEATURES Viewing (On-Screen ] Closed Text Captions Message) The Digital Captions function operates on digital channels. 1 Press the MENU button, Press the A or V button to select "Setup", then press the ENTERbuttor € 2 Move _ Enter _ Caption _{ Press the A or V bu[mn to select "Caation", then Return Caption Mode C pt_on : : _ press the ENTERbu[[ar Press the ENTERbutton to setect "Caption". Move _D* Enter _ Return Pressthe ,& or Y bu[mn to select "Oil".
SPECIAL EEATUXES I 5 Option Press the ENTERbutton re semct "Size". 41 The availabil[tv_ of captions depends on the program being broadcast. 4 Press me A or V butter _ ro_e- Opalcltv : I._,elau # The Detault" means to follow the rule of broadcasting. to selec[ are you wan[, the press the ENTER Move euKon, L73 Enter _ Return Set other listed options below using me same method as above. Press the EXIT button to exk. Size This option consists of "Default", "Small", "Standard" and "Large".
SPECIAL, EEATURES Setting the ] Blue Screen Mode If no signal is lx.mg rccdved or the signal is very weal<, a l_lLtc scr_'_'L1auttomatically replaces the noisy picture 1)ackgroutncl. If),out wish to continue viewing the poor p[ctur(', ),out must set the "Blue Scrcen" mode to "Off". 1 Setup Press the MENU buttoe.
SPECIAL Setting EEATURES the You carl hea_ _a melody I On/Off sound Melody when the TV is powered 1 Setup Press me MENU button Hme Pressthe A. or V buttor to setec[ "Setup', then Dress tile ENTERDue[on. € Move _ Enter _ 2 Pressthe A or T button Return Setup Hug & Play Blue SC[_€_1 to select "Melody", thel cress the ENTEReuEon. : 0 Press [ne A or Y button to se ect "On" or "Off".
SPECIAL EEATURES Using the ] V=Chip Access to channels and programs is controlled by a password that is ck'fined by the utscr). The on-screen menu will instruct (and)rout can change it later, if nec_'ssar7). How to Enable/Disable 1 the Rating (i.e. a 4-digit secret code )rout to assign a password Controls _ Setup Press the MENU button. Pressthe A orY button to select 'ISetup', then press the ENTERbutton, captb_ _uu_scr_,_u l_'l_.
SPECIAL How FEATURES to Change I Your Password 1 Setup Pressthe MENU button Pressthe ,A. orV button m select "Setue'. then uress the ENTERbutton. Chl € Move C_ Enter 333 Return "_ The delault PIN lot a new TV sel is " ) V-Chip Pressme ,_. or Y button _o select "V-Chiu'. then uress the ENTEReu_[on. Press the number BUttons to enter your current 4digit PIN.
SPECIAL How EEATURES to Set up ] Restrictions Using the "TV Parental Thc parental restrictions can be set up using either of two methods: Guidelincs" or "MPAA Rating". 1 i Guidelines" The TV Parental Setup Press the MENU buEon. Pressthe A or V button to select "Setup", then press the ENTERbuttor ON Move _ Enter 1]]] Return 2 V-Chip Press the A. or Y button to se ect "V-ChiB'.then press the ENTERbutton Press the _umber buttons [o enter your current 4digit PIN.
SPECIAL How FEATURES to G, PG, Set I up PG-13, Restrictions R, NC-17, using the Movie Ratings: X Thc Movic rating system uscs the Motion Picturc Association ofAmcrica (MPAA) system, and its main application is %r movies. Whcn the Rating Control is on, thc TV will automatically block any programs that arc coded with ol_jecrionable ratings (tither MPAA or T_URatings). Preasthe MENU button. Pressthe A 0rY button to select "Setup", then press _he ENTERbutton. 2 _ v-c.
I SPECIAL EEATURES Important Explanation TV (FCC) I Notes About of the MPAA and Age-Based Parental TV (tiCC) Locks Rating Systems: Ratings W-Y TV-PG All ch Idren. Tile themes and elements ir this program are specifically designed for a very youn£ audience, including children from ages [wo ro six. Parental guidance suggested. The program may con[am nfrequen_ coarse language, limitec violence, some suggestive sexua malog and situations. TV-Y7 Directed to older chi] Jren.
SPE(ilAE How EEATURES to Set up I Restrictions Using "Canadian Setup Press me MENU button Press the ,& or V button to setect "Setue'. then cress the ENTERBurton. ..... _, _+,_±_,H Move _ Enter :]:]3 Return Press the A or Y button to select "V-chip'.then cress the ENTEReu_[on. _ii Press the number buttons V-Chip to en[er your current 4digit PIN. o-9 Enter 3 PIN :m Return _ Canadian English", then press me ENTERbutton, C U G PG U U 18+ U B: B_OCk_d @ Move U: URblocked _11.
SPECIAL How EEATUXES to Set ] up Restrictions Using "Canadian 1 Setup Press the MENU button. LIb_e Pressthe _, cry buttc 1 to select "Setup". then press the ENTERbutton BV_e Sc_@e_l Move _z_ Enter [_3 Return V-Chip Press the A. or Y bu[mn to select "V-chiu'.then press the ENTERbutton m Press tne number buttons tOemer your current 4digit PiN 0-9 Enter PIN [m 3 Canadian Return French Press the a, 3r Y button to select "Canadtan French". men cress the ENTERbutton.
SPELIIAE EEATUXES Using I the V-Chip for Digital channels Pa_'ental _estdction infomiation can be used while watching DTV channels. 1 Setup Press the MENU button Pressthe at or V buttor to select "SetutY', then Dress tile ENTERbutton. € Move I_ Enter 2 ]33 Return V-Chip Pressthe at or V BuEon m select "V-chie".then uress the ENTERBUt[On, Press me number to ellier buttons VOLr current 4- digit PIN.
SPECIAL, EEAYURES ] f_[ii]_EL[It 4 Youcan independently 3ckthe IV ratings. Tile 3eked TV raungs are _dicated by the symbol To unlock a Iockea *_ Allow All: Press to unlock all TV ratings. Block All : Press to lock all TV ratings. channe4 press the ENTER button agam, Press the A!Ti4!_ buttons and the ENTERb iron to acuva_etile appropriate resmcfions for TV ranng system. Press the EXiT button to exit, • The parental • The default menu name and Downloadable dowNoaded information.
TROUBLESHOOTING If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, then call your nearest Sanasung authorized SeFvico cerltoR identifying Problems Problem Possible Solution Poor picture. Try another chamlel. Adjust the antenna. Cl{eckall wire connections. Poor sotmd quality. Try another channel. k(_jLlst the antenna. No picture or sound. Try another channel. Pr3ss the SOURCE button.
Cleaning and Maintaining Please follow these guidelines to get the maximum Placement • Do not place the TV near extremely • Do not place the TV near appliances such as vacuum cleaners. • • Your TV perlormance trom your T_ hot, cold, humid or dusty places. with electric motors that create magnetic Keep the ventilation opemngs clear; do not place the TV on a soh surlace, cloth or paper. Place the TV in a vertical position onl}: Liquids • Do not handle dama,,e liquids such as near or on the T .
Contact SAIVISUNG WORLD-WIDE If you have any questions customer care center. or comments relating to Samsung products, please contact the SAMSUNG Aa Samsung Electronics Canada Inc., Customer Service CANADA 55 Standish Court Mississauga, Canada 1-800-SAMSUNG (7287864) www.samsung.com/ca Samsung Electronique Canada Inc., Service & la Clientele 55 Standish Court Mississauga, Canada PANAMA 800-7287 www.samsung.