User Manual

◀ ◀▶
English
Issues Solutions and Explanations
A “Mode Not Supported”
message appears.
•
Check the supported resolution of the TV, and adjust the external
device’s output resolution accordingly.
There is a plastic smell from the
T V.
•
This smell is normal and will dissipate over time.
The TV Signal Information is
unavailable in the Self Diagnostic
menu.
•
This function is only available with digital channels from an Antenna / RF/
Coax connection.
The TV is tilted to the side.
•
Remove the base stand from the TV and reassemble it.
The channel menu is greyed
out. (unavailable)
•
The Channel menu is only available when the TV source is selected.
Your settings are lost after 30
minutes or every time the TV is
turned off.
•
If the TV is in the Store Demo mode, it will reset audio and picture
settings every 30 minutes. Change the settings from Store Demo mode
to Home Use mode in the Plug & Play (Initial setup) procedure. Press
the SOURCE button to select TV mode, and go to MENU
→
System
→
Plug & Play (Initial setup)
→
ENTER
E
.