User Manual

176 177
There is something
wrong with the TV.
Try this!
The picture is distorted.
The compression of video content may cause picture distortions, especially in fast
moving pictures such as sports and action movies.
A weak or bad quality signal can cause picture distortions. This is not an issue
with the TV.
Mobile phones used close to the TV (within 1m) may cause noise in analogue and
digital channels.
The colour is wrong or
missing.
If you’re using a Component connection, make sure that the component cables are
connected to the correct jacks. Incorrect or loose connections may cause colour
problems or a blank screen.
The colour is poor or
the picture is not bright
enough.
Navigate to Picture and adjust Picture Mode, Brightness, Sharpness, Colour, and
other picture adjustment settings.
See if Energy Saving (Screen Menu > System > Eco Solution > Energy Saving)
has been enabled.
Try resetting the picture. (Screen Menu > Picture > Reset Picture)
There is a dotted line
on the edge of the
screen.
If Picture Size is set to Screen Fit, change it to 16:9.
Change the cable/satellite box resolution.
The picture is black
and white.
If you are using AV composite input, connect the video cable (yellow) to the TV's
green component jack.
The colour is wrong or
missing.
If you are using a Component connection, make sure that the component cables
are connected to the correct jacks. Incorrect or loose connections may cause
colour problems or a blank screen.
When changing
channels, the picture
freezes or is distorted
or delayed.
If the TV is connected to a cable box, try to reset the box. (Disconnect and then
reconnect the AC cord and wait until the cable box reboots. It may take up to 20
minutes.)
Set the output resolution of the cable box to 1080i or 720p.