User Manual
11
01 Getting Started
English
Plug & Play (Initial Setup)
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWER
button. Plug & Play is available only when the Input source is set to TV.
✎
To return to the previous step, press the Red button.
1
Turn on the TV and
Touch Control.
y Turn on the Touch Control and then tap OK on your
remote.
✎
It may take about one minute to establish a wireless
connection between the TV and Touch Control
using the Samsung Wireless LAN Adapter.
2
Connect the
Samsung Wireless
LAN Adapter
y Connect the Samsung Wireless LAN Adapter to the TV. You can connect the Samsung
Wireless LAN Adapter using one of the methods shown on page 35.
y If the connection fails, reconnect the Samsung Wireless LAN Adapter and then try again.
3
Selecting a
language
Press the ▲ or ▼ button, then press the ENTER
button.
Select the desired OSD (On Screen Display) language.
4
Selecting Store
Demo or
Home Use
Press the ◄ or ► button, then press the ENTER
button.
y Select the Home Use mode. Store Demo mode is for retail environments.
y To return the unit’s settings from Store Demo to Home Use (standard): Press the volume
button on the TV. When the OSD volume is displayed, press and hold MENU for 5 sec.
5
Selecting a country
Press the ▲ or ▼ button, then press the ENTER
button.
Select the appropriate country.
6
Selecting an
antenna
Press the ▲ or ▼ button, then press the ENTER
button.
Select Air or Cable.
7
Selecting a channel
Press the ▲ or ▼ button, then press the ENTER
button.
Select the channel source to memorise. When setting the antenna source to Cable, a step
appears allowing you to assign numerical values (channel frequencies) to the channels. For
more information, refer to Channel → Auto Store (p. 18).
✎
Press the ENTER
button at any time to interrupt the memorisation process.
8
Setting the Clock
Mode
Set the Clock Mode automatically or manually.
Press the ▲ or ▼ button to select Auto, then press the ENTER
button.
9
Time Zone
Press the ▲ or ▼ button to select the your time zone, then press the ENTER
button.
(depending on the country)
10
Viewing the HD
Connection Guide.
The connection method for the best HD screen quality is displayed.
11
Enjoy your TV.
Press the ENTER
button.
If You Want to Reset This Feature...
Select Setup - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0.” If you want to
change the PIN number, use the Change PIN function.
[UC9000]BN68-02820C-XE.indb 11 2010-05-24 오후 3:32:35