User Manual
144
●
White Balance
Try Now
Adjust the colour temperature of the picture to make white objects look white, and the overall
picture appear natural.
2 Point: Adjust each of the 3 colour's luminosity with the offset menu and the brightness with
the gain menu. To restore the default values, select Reset.
10 Point: Adjust the white balance by adjusting the brightness of each of the 10 sections of red,
green, and blue colours of the input signal. To choose a section, select a desired section in Level
field.
"
You can use the 10 Point function only when the Picture Mode is set to Movie. Some external devices
may not support this.
●
Gamma
Try Now
Adjusts the primary colour intensity.
●
Motion Lighting
Try Now
"
Availability depends on the specific model and area.
Adjusts the brightness in response to on-screen movements to reduce power consumption.
"
This feature is only available when the Picture Mode is set to Standard and is not available in 3D
mode.
"
Adjusting the Contrast, Brightness, and other picture quality settings deactivates the feature.