User Manual

32
Pairing Samsung Smart Control
To control the TV with Samsung Smart Control, you need to pair Samsung Smart Control to the TV via
Bluetooth. Pair Samsung Smart Control to the TV.
"
Samsung Smart Control can only be paired to a single TV.
Point Samsung Smart Control at the remote control sensor of the TV and press the TV button to turn
the TV on.
"
Remote control receiver’s location may vary depending on the model.
Reconnecting Samsung Smart Control
If the Samsung Smart Control stops operating or works abnormally, replace the batteries as this may
be due to insufficient battery power.
If the problem persists, the Samsung Smart Control restore pairing with the TV.
1.
Press both the RETURN button and the GUIDE button simultaneously for more than 3 seconds.
"
You must place the Samsung Smart Control approximately 30cm ~ 40cm away from the TV and ensure
it is pointing towards the remote control receiver.
2.
Connection image is appeared on the screen. And then, Samsung Smart Control is connecting to
TV automatically.