E-MANUAL imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register Model___________ Serial No.
Contents Channel • Using the INFO button (Now & Next guide) Advanced Features Preference Features • Using Channel menu 1 2 • Memorizing channels 16 • Setting the Wireless Network 70 • Connecting a USB Device 128 • Other Features 19 • Managing the Network Connected Devices 77 • Connecting to the PC through network 134 • Setting the Setup 81 • Screen Display 137 • Setting the Time 82 • Media Contents - Additional Functions 148 • Using the DLNA Functions 153 Basic Features • Connec
❑❑ Using the INFO button (Now & Next guide) The display identifies the current channel and the status of certain audio-video settings. The Now & Next guide shows daily TV program information for each channel according to the broadcasting time. ●● Scroll ◄ ► to view information for a desired program while watching the current channel. ●● Scroll ▲ ▼ to view information for other channels. If you want to move to the currently selected channel, press the ENTERE button.
❑ Using Channel menu O MENUm → Support → Contents Home → ENTERE Press the CONTENT button to select Contents Home, then select the desired menu. Each screen will be displayed. Contents Home ◀ Channel List Guide AllShare Play Schedule Manager Source R Return * The displayed image may differ depending on the model.
■■ Channel List You can view channel information, All, TV, Analog or Favorites 1-5. NN When you press the CH LIST button on the remote control, Channel List screen will be displayed at once. ◀ ●● ●● ●● ●● All: Shows all currently available channels. TV: Shows all currently available TV channels. Analog: Shows all currently available analog channels. Favorites 1-5: Show all favorite channels. NN Favorites 1-5 will be displayed when you set Edit Favorites.
NN Using the function buttons with the Channel List. ●● T (Tools): Displays the option menu. ●● L (CH Mode / Channel): Move to the All, TV, Analog or Favorites 1-5. NN When you select the Program View in T (Tools) menu, you can move to other channels using L (Channel) button. ●● E (Watch / Information): Watches the channel you select. / Displays details of the selected program. ◀ ●● k (Page): Move to next or previous page.
How to use Schedule Viewing in Channel List (digital channels only) When you set the Schedule Viewing in Channel List, you can only set the program in Program View. 1. Press the CH LIST button, then select a desired digital channel. 2. Press TOOLS button, and then select the Program View. The program list for that channel appears. 3. Press the ▲ / ▼ buttons to select the desired program, then press the ENTERE (Information) button. ◀ 4. Select Schedule Viewing, then press the ENTERE button when done.
Using Option Menu t Set each channel using the Channel List menu options (Program View, Edit Favorites, Lock/Unlock, Channel Name Edit/Edit Channel Number, Delete, Information, Sort, Change Antenna, Edit Mode). Option menu items may differ depending on the channel status. 1. Select a channel and press the TOOLS button. 2. Select a function and change its settings. ●● Program View (digital channels only): Displays the program when digital ◀ channel is selected.
●● Edit Favorites t: Set channels you watch frequently as favorites. Add or delete the selected channel in Favorites 1-5. 1. Select the Edit Favorites, then press the ENTERE button. 2. Press the ENTERE button to select Favorites 1-5, then press the OK button. NN One favorites channel can be added in several of favorites among Favorites 1-5. ●● Lock/Unlock: Lock a channel so that the channel cannot be selected and ◀ viewed. NN This function is available only when the Channel Lock is set to On.
●● Channel Name Edit (analog channels only): Assign your own channel name. Edit Channel Number (digital channels only): Edit the number by pressing the number buttons desired. ●● Delete: Delete a channel from the channel list. ●● Information: Displays details of the selected program. NN Press the Watch to switch the channel directly. ●● Sort (digital channels only): Changes the list ordered by channel number or channel name. ◀ ●● Change Antenna: Switches to Air or Cable.
Using Option Menu in Edit Mode t Set each channel using the menu options (Edit Favorites, Lock/Unlock, Delete, Information, Deselect, Select All). ◀ 1. Press the TOOLS button in Channel List screen, then select the Edit Mode. A check box appears to the left of the channel. 2. Press the ▲/▼ buttons to select the desired channel, and then press ENTERE button. The (c) mark indicates the channel you’ve selected. NN You can select more than one channel. NN Press ENTERE button again to deselect the channel.
3. Press the TOOLS button, then select a function and change its settings. ●● Edit Favorites: Set the selected channels you watch frequently as favorites. NN The Edit Favorites screen has five groups (Favorites 1, Favorites 2, etc.). You can add a favorite channel to any one of the groups. Press the ▲/▼ buttons to select a group. ●● Lock/Unlock: Lock a channel so that the channel cannot be selected and viewed. ◀ NN This function is available only when the Channel Lock is set to On.
●● Delete: Delete a channel from the channel list. ●● Information: Displays details of the selected program. NN Press the Watch to switch the channel directly. ●● Deselect: Deselect the selected channels. ●● Select All: Select all the channels in the channel list.
■■ Guide The EPG (Electronic Program Guide) information is provided by broadcasters. Using program schedules provided by broadcasters, you can specify programs you want to watch in advance so that the channel automatically changes to the selected program channel at the specified time. Program entries may appear blank or out of date depending on a channel status.
1 a Red (Schedule Mgr): Moves to the Booking List in Schedule Manager. 2 b Green (-24 Hours): Viewing the list of programs to be broadcasted before 24 hours. 3 { Yellow (+24 Hours): Viewing the list of programs to be broadcasted after 24 hours. 4 } Blue (CH Mode): Select the type of channels you want to display on the Channel List window. (All, TV, Favorites 1-5) ◀ 5 ` (Information): Displays details of the selected program and let you make a manual booking. 6 k (Page): Move to previous or next page.
■■ Schedule Manager You can set a desired channel to be displayed automatically at the intended time. In addition, you can view, modify or delete a channel you have reserved to watch. Set the current time first to use this function. Using Option Menu t Set each channel using the menu options (Cancel schedule, Edit Schedule, Manually Schedule, View Guide). ◀ 1. Press the TOOLS button to select the Manually Schedule. NN You can press the a (Manually Schedule) directly on the Schedule Manager screen. 2.
●● Repeat: Select Once, Manual, Sat~Sun, Mon~Fri or Everyday to set at your convenience. If you select Manual, you can set the day you want. NN The (c) mark indicates the day is selected. ●● Date: You can set desired date. NN It is available when you select Once in Repeat. ●● Start Time: You can set start time you want. NN If you want to edit or cancel the schedule, select the reserved schedule on ◀ the Booking List. Press the TOOLS button and select the Edit Schedule or Cancel schedule.
❑❑ Memorizing channels OO MENUm → Channel → ENTERE ■■ Antenna (Air / Cable) t Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e. an Air or a Cable system).
■■ Auto Tuning Scans for a channel automatically and stores in the TV. NN Automatically allocated program numbers may not correspond to actual or desired program numbers. If a channel is locked, the PIN input window appears. NN If the antenna is connected to ANT 2 IN (CABLE), select Cable and if it is connected to ANT 1 IN (AIR), select Air. When Antenna Source is set to Air or Cable: ◀ When selecting Air: Provide a value to scan for Digital and Analog channels.
■■ Digital Manual Tuning Scans for a digital channel manually and stores in the TV. Press the New button to search the digital channels by adjusting the Channel or Frequency. NN If a channel is locked, the PIN input window appears. NN Digital Manual Tuning is only available in digital TV mode. ●● Channel: Set the channel number using the ▲ ▼ or number (0~9) buttons. ◀ ●● Frequency: Set the frequency using the number buttons.
❑❑ Other Features ■■ Fine Tune (analog channels only) If the reception is clear, you do not have to fine tune the channel, as this is done automatically during the search and store operation. If the signal is weak or distorted, fine tune the channel manually. ●● Select Fine Tune in the Channel menu. ◀ NN Fine tuned channels that have been saved are marked with an asterisk “*” on the right side of the channel number in the channel banner. NN To reset the fine-tuning, select Reset.
■■ Crosstalk Noise Reduction (Off / On) (analog channels only) Reduce diagonal noise in picture caused by the crosstalk of signals. ■■ Color System (Auto / PAL-M / PAL-N / NTSC) ◀ (analog channels only) Normally the TV can receive image and sound with good quality in Auto mode. This mode detects the color signal sources automatically. If the color implementation is unsatisfactory, select any of PAL-M, PAL-N or NTSC.
❑❑ Changing the Preset Picture Mode OO MENUm → Picture → Picture Mode → ENTERE ■■ Picture Mode t Select your preferred picture type. NN When connecting a PC, you can only make changes to the Entertain and Standard. ◀ ●● ●● ●● ●● ●● Dynamic: Suitable for a bright room. Standard: Suitable for a normal environment. Natural for LED 5000, 6000 series : Suitable for an eye comfortable display. Movie: Suitable for watching movies in a dark room. Entertain: Suitable for watching movies and games.
❑❑ Adjusting Picture Settings ■■ Backlight for LED TV / Cell Light for PDP TV / Contrast / Brightness / Sharpness / Color / Tint (G/R) Your television has several setting options for picture quality control. NN NOTE ●● When connecting a PC, you can only make changes to ◀ Backlight for LED TV / Cell Light Sharpness. for PDP TV , Contrast, Brightness and ●● Settings can be adjusted and stored for each external device connected to the TV. ●● Lowering picture brightness reduces power consumption.
■■ Screen Adjustment Set the various picture options such as picture size and aspect ratio. ●● Picture Size: Your cable box/satellite receiver may have its own set of screen sizes as well. However, we highly recommend you use 16:9 mode most of the time. 16:9: Sets the picture to 16:9 wide mode. Wide Zoom: Magnifies the picture size more than 4:3. NN Adjusts the Position by using ▲ ▼ buttons in the Position screen. ◀ Zoom: Magnifies the 16:9 wide pictures vertically to fit the screen size.
4:3: Sets the picture to basic (4:3) mode. NN Do not watch in 4:3 format for a long time. Traces of borders displayed on the left, right and center of the screen may cause image retention (screen burn) which are not covered by the warranty. Screen Fit: Displays the full image without any cut-off when HDMI (720p / 1080i / 1080p) or Component (1080i / 1080p) signals are input. NN Not available for PDP 450 series. ◀ Smart View 1 for LED 5000, 6000 series : Reduces original screen by 50%.
●● Position: Adjust the picture position. It is only available in Screen Fit or Wide Zoom. ●● Zoom/Position: Adjust the picture position. It is only available in Zoom. NN NOTE ●● After selecting Screen Fit in HDMI (1080i/1080p) or Component (1080i/1080p) mode, you may need to center the picture. Select Position, then follow the steps below in the Position screen. ◀ 1. Select the Position, press the ENTERE button. 2. Press the ▲ / ▼ / ◄ or ► button to move the picture. 3. Press the ENTERE button.
●● The available items may differ depending on the selected mode. ●● When connecting a PC, only 16:9 and 4:3 modes can be adjusted. ●● Settings can be adjusted and stored for each external device connected to an input on the TV. ●● If you use the Screen Fit function with HDMI 720p input, 1 line will be cut at the top, bottom, left and right as in the overscan function.
❑❑ Changing the Picture Options ■■ Advanced Settings OO MENUm → Picture → Advanced Settings → ENTERE (available in Standard / Movie mode) ●● Dynamic Contrast (Off / Low / Medium / High): Adjust the screen contrast. ◀ ●● Black Tone (Off / Dark / Darker / Darkest): Select the black level to adjust the screen depth. ●● Flesh Tone: Emphasize pink “Flesh Tone”. ●● RGB Only Mode (Off / Red / Green / Blue): Displays the Red, Green and Blue color for making fine adjustments to the hue and saturation.
●● Color Space (Auto / Native / Custom for LED 6000 series ): Adjust the range of colors available to create the image. NN To adjust Color, Red, Green, Blue and Reset, set Color Space to Custom. ●● White Balance: Adjust the color temperature for a more natural picture. R-Offset / G-Offset / B-Offset: Adjust each color’s (red, green, blue) darkness. R-Gain / G-Gain / B-Gain: Adjust each color’s (red, green, blue) brightness. ◀ Reset: Resets the White Balance to its default settings.
●● 10p White Balance (Off / On) : Controls the white balance in 10 point interval by adjusting the red, green, and blue brightness. NN Available when the picture mode is set to Movie and when the external input is set to all input. NN Some external devices may not support this function. for LED 6000 series Interval: Select interval to adjust. Red: Adjust the red level. Green: Adjust the green level. ◀ Blue: Adjust the blue level. Reset: Resets the 10p White Balance to its default settings.
●● Gamma: Adjust the primary color intensity. ●● Expert Pattern (Off / Pattern 1 / Pattern 2) : By running the Expert Pattern function, the picture can be calibrated without a generator or filter. If the OSD menu disappears or a menu other than the Picture menu is opened, the calibration is saved and the Expert Pattern window disappears. NN While the Expert Pattern is running, sound is not output. for LED 6000 series NN Only available in Standard mode. NN Only enabled on DTV / Component / HDMI.
●● xvYCC (Off / On) : Setting the xvYCC mode on increases detail and color space when watching movies from an external device (e.g. DVD player) connected to the HDMI or Component IN jacks. NN Available when the picture mode is set to Movie and when the external input is set to HDMI or Component. NN Some external devices may not support this function. for LED 6000 series ●● Motion Lighting (Off / On): Reduce power consumption by brightness ◀ control adapted motion.
■■ Picture Options OO MENUm → Picture → Picture Options → ENTERE NN When connecting a PC, you can only make changes to the Color Tone. ●● Color Tone (Cool / Standard / Warm1 / ◀ Warm2) NN Warm1 or Warm2 will be deactivated when the picture mode is Dynamic. NN Settings can be adjusted and stored for each external device connected to an input on the TV.
●● Digital Noise Filter (Off / Low / Medium / High / Auto / Auto Visualization): If the broadcast signal received by your TV is weak, you can activate the Digital Noise Filter feature to reduce any static and ghosting that may appear on the screen. NN When the signal is weak, try other options until the best picture is displayed. Auto Visualization: When changing analog channels, displays signal strength. ◀ NN Only available for analog channels.
●● HDMI Black Level (Low / Normal): Selects the black level on the screen to adjust the screen depth. NN Available only in HDMI mode (RGB signals). ●● Film Mode (Off / Auto1 / Auto2): Sets the TV to automatically sense and process film signals from all sources and adjusts the picture for optimum quality. NN Available in TV, AV, COMPONENT (480i / 1080i) and HDMI (1080i). NN If the screen does not seem natural, change its option to Off / Auto1/ ◀ Auto2 in Film Mode.
●● Auto Motion Plus (Off / Clear / Standard / Smooth / Custom / ◀ Demo) for LED 6000 series : Enhances motion in fast moving scenes. NN The info screen on your TV displays the resolution and frequency of the incoming video signal (60Hz). This displayed frequency is not what the TV is displaying by using the Auto Motion Plus function. NN If noise occurs on the screen, please set up the Auto Motion Plus to Off.
■■ Reset Picture (Yes / No) Resets your current picture mode to its default settings.
❑❑ Changing the Preset Sound Mode OO MENUm → Sound → Sound Mode → ENTERE ■■ Sound Mode t ◀ ●● ●● ●● ●● ●● Standard: Selects the normal sound mode. Music: Emphasizes music over voices. Movie: Provides the best sound for movies. Clear Voice: Emphasizes voices over other sounds. Amplify: Increase the intensity of high-frequency sounds to allow a better listening experience for the hearing impaired. NN If Speaker Select is set to External Speaker, Sound Mode is disabled.
❑❑ Sound Settings OO MENUm → Sound → Sound Effect → ENTERE ■■ Sound Effect (standard sound mode only) Use the up and down arrow keys to select an option, and then press ENTERE. ●● SRS TruSurround HD (Off / On) t ◀ This function provides a virtual 5.1 channel surround sound experience through a pair of speakers or headphones using HRTF (Head Related Transfer Function) technology.
●● Equalizer Use Equalizer to customize sound setting for each speaker. Balance L/R: Adjusts the balance between the right and left speaker. 100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment): Adjusts the level of specific bandwidth frequencies. Reset: Resets the equalizer to its default settings. NN If Speaker Select is set to External Speaker, Sound Effect is disabled.
❑❑ Adjusting Sound Settings ■■ Broadcast Audio Options OO MENUm → Sound → Broadcast Audio Options → ENTERE ●● Multi-Track Sound (MTS) t (analog channels only) ◀ Mono: Choose for channels that are broadcasting in mono or if you are having difficulty receiving a stereo signal. Stereo: Choose for channels that are broadcasting in stereo. SAP: Choose to listen to the Separate Audio Program, which is usually a foreign-language translation.
●● Audio Language t (digital channels only) Change the default value for audio languages. NN The available language may differ depending on the broadcast. ●● Audio Format (MPEG / Dolby Digital 5.1) (digital channels only) ◀ When sound is emitted from both the main speaker and the audio receiver, a sound echo may occur due to the decoding speed difference between the main speaker and the audio receiver. In this case, use the TV Speaker function.
■■ Additional Settings (digital channels only) ●● DTV Audio Level (MPEG / HE-AAC): This function allows you to reduce the ◀ disparity of a voice signal (which is one of the signals received during a digital TV broadcast) to a desired level. NN According to the type of broadcast signal, MPEG/HE-AAC can be adjusted between -10dB and 0dB. NN To increase or decrease the volume, adjust between the range 0 and -10 respectively.
●● SPDIF Output SPDIF (Sony Philips Digital InterFace) is used to provide digital sound, reducing interference going to speakers and various digital devices such as a DVD player. Audio Format: You can select the Digital Audio output (SPDIF) format. The available Digital Audio output (SPDIF) format may differ depending on the input source. NN By connecting to 5.1ch speakers in a dolby digital setup, maximize your ◀ interactive 3D sound experience.
●● Dolby Digital Comp (Line / RF): This function minimizes signal disparity between a dolby digital signal and a voice signal (i.e. MPEG Audio, HE-AAC, ATV Sound). NN Select Line to obtain dynamic sound, and RF to reduce the difference between loud and soft sounds at night time. Line: Set the output level for signals greater or less than -31dB (reference) to either -20dB or -31dB. ◀ RF: Set the output level for signals greater or less than -20dB (reference) to either -10dB or -20dB.
■■ Speaker Settings ●● Speaker Select (External Speaker / TV Speaker) A sound echo may occur due to a difference in decoding speed between the main speaker and the audio receiver. In this case, set the TV to External Speaker. NN When Speaker Select is set to External Speaker, the volume and ◀ MUTE buttons will not operate and the sound settings will be limited. NN When Speaker Select is set to External Speaker, you should use these settings.
●● Auto Volume (Off / Normal / Night) To equalize the volume level on each channel, set to Normal. Night: This mode provides an improved sound experience compared to Normal mode, making almost no noise. It is useful at night. NN To use the volume control on the source device connected to the TV, set Auto Volume to Off on the TV. Otherwise, a change to the volume control of the source device may not be applied.
■■ Reset Sound (Yes / No) Reset all sound settings to the factory defaults.
❑❑ Selecting the Sound Mode t When you set to Dual I-II, the current sound mode is displayed on the screen. A2 Stereo ◀ NICAM Stereo Audio Type Dual I-II Mono Mono Stereo Stereo ↔ Mono Dual Dual I ↔ Dual II Mono Mono Stereo Mono ↔ Stereo Dual Mono → Dual I Dual II Default Automatic change Dual I Automatic change Dual I NN If the stereo signal is weak and an automatic switching, occurs, then switch to the mono. NNOnly activated in stereo sound signal.
❑❑ Connecting to the Network for PDP 490 series NN For LED TVs, network function is not supported depending on the country. ■■ Wired Network Connection for PDP 490 series You can attach your TV to your LAN using cable in three ways: ●● You can attach your TV to your LAN by connecting the LAN port on the back of your TV to an external modem using a LAN cable. See the diagram below. ◀ * The position of port may differ depending on the model.
●● You can attach your TV to your LAN by connecting the LAN port on the back of your TV to a IP Sharer which is connected to an external modem. Use LAN cable for the connection. See the diagram below.
●● Depending on how your network is configured, you may be able to attach your TV to your LAN by connecting the LAN port on the back of your TV directly to a network wall outlet using a LAN cable. See the diagram below. Note that the wall outlet is attached to a modem or router elsewhere in your house. TV Rear Panel The LAN Port on the Wall ◀ ▶ LAN Cable ●● If your network requires a Dynamic IP address, you should use an ADSL modem or router that supports Dynamic Host Configuration Protocol (DHCP).
◀ Modems and routers that support DHCP automatically provide the IP address, subnet mask, gateway, and DNS values your TV needs to access the Internet so you do not have to enter them manually. Most home networks use a Dynamic IP address. Some networks require a Static IP address. If your network requires a Static IP address, you must enter the IP address, subnet mask, gateway, and DNS values manually on your TV’s Cable Setup Screen when you set up the network connection.
■■ Wireless Network Connection for PDP 490 series To connect your TV to your network wireless, you need a wireless router or modem and a Samsung Wireless LAN Adapter (WIS09ABGNX, WIS12ABGNX), which you connect to your TV’s back or side panel USB port. See the illustration below. Wireless IP sharer (Wireless router having DHCP Server) ◀ Samsung Wireless LAN Adapter The LAN Port on the Wall ▶ TV Side Panel * The position of port may differ depending on the model.
Samsung’s Wireless LAN adapter is sold separately and is offered by select retailers and Ecommerce sites. Samsung’s Wireless LAN adapter supports the IEEE 802.11a/b/g and n communication protocols. Samsung recommends using IEEE 802.11n. When you play video over a network connection, the video may not be played smoothly. NN NOTE ●● You must use the “Samsung Wireless LAN Adapter” (WIS09ABGNX, WIS12ABGNX) to use a wireless network.
●● To use a wireless network, your TV must be connected to a wireless IP sharer (either a router or a modem). If the wireless IP sharer supports DHCP, your TV can use a DHCP or static IP address to connect to the wireless network. ●● Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP sharer is currently being used by another device nearby, this will result in interference and communication failure.
●● If HIGH PURE THROUGHPUT (Greenfield) 802.11n mode is selected and the Encryption type is set to WEP or TKIP for your wireless router, Samsung TVs will not support a connection in compliance with new Wi-Fi certification specifications. ●● If your wireless router supports WPS (Wi-Fi Protected Setup), you can connect to the network via PBC (Push Button Configuration) or PIN (Personal Identification Number). WPS will automatically configure the SSID and WPA key in either mode.
●● If your router, modem, or device is not certified, it may not connect to the TV via the “Samsung Wireless LAN Adapter”. ●● Ensure the TV is turned off before you connect the Samsung Wireless LAN Adapter. ●● Connection Methods: You can setup the wireless network connection like below.
Notice The picture may appear corrupted or have static for some channels when the TV is connected to the Samsung Wireless LAN Adapter. In such a case, establish a connection using one of the following methods or connect the Samsung Wireless LAN Adapter using a USB cable in a place that is not affected by radio interference. Method 1 ◀ Connect using the USB right angle adapter. To connect the Samsung Wireless LAN Adapter using the USB right angle adapter, follow these steps: 1.
Method 2 Connect via an extension cable To reconnect the Samsung Wireless LAN Adapter using the extension cable, follow these steps: or 1. Connect the extension cable to the USB port. 2. Connect the extension cable and Samsung Wireless LAN Adapter. ◀ * The position of port may differ depending on the model. 3. Attach the Samsung Wireless LAN Adapter to the back of the TV near the top, using doublesided adhesive tape.
■■ Network Settings OO MENUm → Network → Network Settings → ENTERE Set the network connection to use AllShare Play and perform software upgrade. NN For detailed settings for wired network, refer to the "Setting the Wired Network", and for detailed settings for wireless network, refer to the "Setting the Wireless Network" in this manual.
■■ Network Status OO MENUm → Network → Network Status → ENTERE You can check the current network and Internet status.
The check list for wired network connection failure When wired network connection failed, try to apply the following information to each issue. Issues No network cable found. Solutions and Explanations • Check that your network cable is plugged in. • If it is connected, make sure that the router is turned on; if it is on, try turning it off and on again. IP auto setting failed. ◀ Try the following to set your IP address automatically or set your IP address manually by selecting IP Settings.
Issues Solutions and Explanations Unable to connect to the network. • Check if your IP address is set correctly in IP Settings. Connected to your local network, but cannot connect to the Internet. • Check your Internet LAN cable is connected correctly to LAN port of router. • Contact your Internet Service Provider for more information. • Check the DNS settings in IP Settings. • If the problem persists, contact your Internet Service Provider to access the Internet.
The check list for wireless network connection failure When wireless network connection failed, try to apply the following information to each issue. Issues ◀ Solutions and Explanations Wireless network connection failed. • No wireless router selected. Go to Network Settings to select your router. Unable to connect to wireless router. • Check that the router is turned on, and if it is on, try turning it off and on again. • Check if you need to enter a security key to use the router.
Issues Unable to connect to the network. Solutions and Explanations • Check if your IP address is set correctly in IP Settings. • Check if you need to enter a security key to use the router. • Contact your Internet Service Provider for more information. Connected to your local network, but cannot connect to the Internet. ◀ • Check your Internet LAN cable is connected correctly to LAN port of router. • Check the DNS settings in IP Settings.
❑❑ Setting the Wired Network for PDP 490 series ■■ Wired Network Setup (Auto) NN When connecting the LAN Cable, the screen pop-up appears directly to set wired network. Use the Automatic Network Setup when connecting your TV to a network that supports DHCP.
How to set up automatically 1. Go to Network Settings screen. (Network → Network Settings) 2. Select Start. Network cable connected. Press Start to configure your wired network settings. Start 3. The network connection screen appears, and network setting is done. ◀ Network Settings Cancel If you want to connect to your wireless network, plug in a Samsung Wireless LAN Adapter. NN If it fails to set automatically, check the connection of LAN port.
■■ Wired Network Setup (Manual) Use the Manual Network Setup when connecting your TV to a network that requires a Static IP address. Getting the Network Connection Values To get the Network connection values on most Windows computers, follow these steps: 1. Right click the Network icon on the bottom right of the screen. ◀ 2. In the pop-up menu that appears, click Status. 3. On the dialog that appears, click the Support tab. 4. On the Support Tab, click the Details button.
How to set up manually To set up your TV’s cable network connection manually, follow these steps: IP Settings 1. Follow Steps 1 through 2 in the “How to set up automatically” procedure. IP Mode Manual 2. Select the IP Settings on network connection screen. 3. Set IP Mode to Manual. ◀ IP Address 0.0.0.0 Subnet Mask 0.0.0.0 Gateway 0.0.0.0 DNS Mode 4. Press the ▼ button to go to the first entry field. Manual DNS Server 0.0.0.0 ▶ OK R Return 5.
❑❑ Setting the Wireless Network for PDP 490 series ■■ Wireless Network Setup (Auto) ◀ Most wireless networks have an optional security system that requires devices that access the network to transmit an encrypted security code called an Access or Security Key. The Security Key is based on a Pass Phrase, typically a word or a series of letters and numbers of a specified length you were asked to enter when you set up wireless security for your wireless network.
How to set up automatically 1. Go to Network Settings screen. 2. Select Start. Samsung Wireless LAN Adapter connected. Press Start to configure your wireless network settings. 3. The Network function searches for available wireless networks. When done, it displays a list of the available networks. ◀ Network Settings Start Cancel If you want to connect to your wired network, plug in a network cable. 4. In the list of networks, press the ▲ or ▼ button to select a network, and then press ENTERE button.
5. If the Security screen pop-up appears, go to step 6. If you select the wireless router which does not have wireless security, go to step 7. 6. To set wireless security for the router, enter the Security key(Security or PIN). NN When you enter the Security key (Security or PIN), use ▲/▼/◄ /► buttons to select number/characters. Press ENTERE to enter the characters. NN You should be able to find the Pass Phrase on one of the set up screens you used to set up your router or modem. ◀ 7.
■■ Wireless Network Setup (Manual) Use the Manual Network Setup when connecting your TV to a network that requires a Static IP address. Getting the Network Connection Values To get the Network connection values on most Windows computers, follow these steps: 1. Right click the Network icon on the bottom right of the screen. ◀ 2. In the pop-up menu that appears, click Status. 3. On the dialog that appears, click the Support tab. 4. On the Support Tab, click the Details button.
How to set up manually To set up your TV’s cable network connection manually, follow these steps: 1. Follow Steps 1 through 7 in the “How to set up automatically” procedure. 2. Select the IP Settings on network connection screen. 3. Set IP Mode to Manual. 4. Press the ▼ button to go to the first entry field. ◀ 5. Enter the IP Address, Subnet Mask, Gateway, and DNS Server values. Use the number buttons to enter numbers and the arrow buttons to move from one entry field to another. 6.
■■ Wireless Network Setup (WPS(PBC)) If your router has a WPS(PBC) button, follow these steps: 1. Go to Network Settings screen. 2. Select Start. 3. The Network function searches for available wireless networks. When done, it displays a list of the available networks. 4. Select the WPS(PBC). ◀ 5. Press the WPS(PBC) button on your router within 2 minutes. Your TV automatically acquires all the network setting values it needs and connects to your network. 6.
If Your TV Fails to Connect to the Internet Your TV may not be able to connect to the Internet because your ISP has permanently registered the MAC address (a unique identifying number) of your PC or modem, which it then authenticates each time you connect to the Internet as a way of preventing unauthorized access. As your TV has a different MAC address, your ISP can not authenticate its MAC address, and your TV can not connect.
❑❑ Managing the Network Connected Devices for PDP 490 series ■■ Wi-Fi Direct OO MENUm → Network → Wi-Fi Direct → ENTERE Set to connect the TV to wireless mobile devices. Using this function, you can connect wireless mobile devices with your TV directly without a router. NN You can use this function when connecting the Samsung Wireless LAN Adapter. ◀ NN It only supports AllShare Play function. NN It may not be supported depending on the mobile device.
How to connect the Wi-Fi device to your TV using Wi-Fi Direct function 1. Go to Wi-Fi Direct screen. The TV starts to search devices. 2. Turn on the Wi-Fi Direct function on your device. Select the desired device, and then press ENTERE button. –– PBC: Press the WPS(PBC) button on your device within 2 minutes. Your TV automatically acquires all the network setting values it needs and connects to your network. –– PIN: Input the displayed PIN on your device.
■■ AllShare Settings OO MENUm → Network → AllShare Settings → ENTERE Set whether to allow a network connected device like a smartphone or tablet to share content or control TV using an application downloaded on your mobile device. For details on set up options, refer to the "Using the DLNA Functions".
■■ Device Name OO MENUm → Network → Device Name → ENTERE Change the TV’s name by keying in a name manually. NN A keyboard appears on the screen and you can key in a name for your TV manually using your remote control. For example, if you want to change the name to Samsung TV, press each character using the ▲/▼/◄/► buttons, and then select Done.
❑❑ Setting the Setup ■■ Setup OO MENUm → System → Setup → ENTERE Configure the channels and the time when setting up the TV for the first time or when resetting the unit. NN For the detailed information about setting Setup, refer to “Setup (Initial Setup)” in User Manual. ◀ NN Enter your 4-digit PIN, the default of which is 0-0-0-0.
❑❑ Setting the Time ■■ Time OO MENUm → System → Time → ENTERE NN The current time will appear every time you press the INFO button. ●● Clock: Setting the clock is for using various timer features of the TV. NN If you disconnect the power cord, you have to set the clock again. ◀ Clock Mode: Set up the current time manually or automatically. - Auto: Set the current time automatically using the time from a digital channel. NN The antenna must be connected in order to set the time automatically.
- Manual: Set the current time manually. NN Depending on the broadcast station and signal, the auto time set up may not be correct. In this case, set the time manually. Clock Set: Set the Date and Time. NN Available only when Clock Mode is set to Manual. NN You can set the Date and Time directly by pressing the number buttons on the remote control.
❑❑ Using the Sleep Timer OO MENUm → System → Time → Sleep Timer → ENTERE ●● Sleep Timer t: Automatically shuts off the TV after a preset period of time. (30, 60, 90, 120, 150 and 180 minutes). NN To cancel the Sleep Timer, select Off.
❑❑ Setting the On/Off Timer OO MENUm → System → Time → On Timer Off Timer → ENTERE ●● On Timer: Three different on timer settings ◀ can be made. You must set the clock first. Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual to set at your convenience. If you select Manual, you can set up the day you want to activate the timer. NN The c mark indicates the day you’ve selected. Time: Set the hour, minute, am/pm. Volume: Set the desired volume level.
Source: Select TV or USB content to be played when the TV is turned on automatically. (USB can be selected only when a USB device is connected to the TV) Antenna (when the Source is set to TV): Select the desired broadcasting signal. Channel (when the Source is set to TV): Select the desired channel. ◀ Music / Photo (when the Source is set to USB): Select a folder in the USB device containing music or photo files to be played when the TV is turned on automatically.
NN A folder with too long of a name cannot be selected. NN Each USB you use is assigned its own folder. When using more than one ◀ of the same type of USB, make sure the folders assigned to each USB have different names. NN It is recommended that you use a USB memory stick and a multi card reader when using On Timer. NN The On Timer function may not work with USB devices with a built-in battery, MP3 players, or PMPs made by some manufacturers because these devices take a long time to be recognized.
●● Off Timer: Three different off timer settings can be made. You must set the clock first. Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual to set at your convenience. If you select Manual, you can set up the day you want to activate the timer. Off Timer 1 Setup Sun ' Mon ' Tue ' Wed ' Time Thu ' Fri ' Off Sat ' 12:00 am Close R Return NN The c mark indicates the day you’ve ◀ selected. Time: Set the hour, minute, and am/pm.
❑❑ Locking Programs OO MENUm → System → Security → ENTERE ■■ Security NN The PIN input screen appears before the setup screen. NN Enter your 4-digit PIN, the default of which is 0-0-0-0. Change the PIN using the Change PIN option. ◀ ●● Channel Lock (Off / On): Lock channels to prevent unauthorized users, such as children, from watching unsuitable program.
●● Change PIN: The Change PIN screen will appear. Choose any 4 digits for your PIN and enter it in the Enter New PIN. Re-enter the same 4 digits in the Confirm New PIN. When the Confirm screen appears, press the ENTERE button. Your PIN has been memorized.
❑❑ Picture In Picture (PIP) OO MENUm → System → PIP → ENTERE ■■ PIP t You can watch the TV tuner and one external video source simultaneously. PIP (Picture-in-Picture) does not function in the same mode. NN NOTE ◀ ●● For PIP sound, refer to the Sound Select instructions. ●● If you turn the TV off while watching in PIP mode, the PIP window will disappear. ●● You may notice that the picture in the PIP window becomes slightly unnatural when you use the main screen to view a game or karaoke.
●● PIP Settings Main picture Sub picture Component, HDMI TV ●● PIP (Off / On): Activate or deactivate the PIP function. ●● Air/Cable (Air / Cable): Select either Air or Cable as the input source for the sub-screen. ◀ ●● ●● ●● ●● Channel: Select the channel for the sub-screen. Size (Õ / Ã): Select a size for the sub-picture. Position (à / – / — / œ): Select a position for the sub-picture. Sound Select (Main / Sub): You can choose the desired sound (Main or Sub) in PIP mode.
❑❑ Economical Solutions ■■ Eco Solution ●● Energy Saving (Off / Low / Medium / High / Picture Off) t: This adjust the brightness of the TV in order to reduce power consumption. If you select Picture Off, the screen is turned off, but the sound remains on. Press any button except volume button to turn on the screen. ●● Eco Sensor (Off / On): To enhance your power savings; the picture settings ◀ will automatically adapt to the light in the room. NN Not available for LED 4 series.
Min. Backlight for LED TV / Min Cell Light for PDP TV : When Eco Sensor is On, the minimum screen brightness can be adjusted manually. NN If Eco Sensor is On, the display brightness may change (become slightly darker in most cases) depending on the surrounding light intensity. ●● No Signal Power Off (Off / 15 min. / 30 min. / 60 min.): Sets how quickly the TV switches to standby mode, if no picture is being received. NN Disabled when the PC is in power saving mode.
❑❑ Other Features OO MENUm → System → ENTERE ■■ Language ●● Menu Language: Set the menu language. ◀ 1. Select Menu Language and press the ENTERE button. 2. Choose desired language and press the ENTERE button. NN Choose between English, Português and Español. ●● Preferred Language (Primary Audio / Secondary Audio / Primary Subtitle / Secondary Subtitle): Select a language, which will be the default language when a channel is selected.
■■ Subtitle (digital channels only) Use this menu to set the Subtitle mode. NN The subtitle feature does not work in Component or HDMI modes. ●● Subtitle (Off / On): Switches subtitles on or off. ●● Subtitle Mode (Normal / Hearing Impaired): Sets the subtitle mode. ●● Subtitle Language: Sets the subtitle language. ◀ NN If the program you are watching does not support the Hearing Impaired function, Normal automatically activates even if the Hearing Impaired mode is selected.
■■ Caption (On-Screen Text Messages) (analog channels only) ●● Caption (Off / On): You can switch the caption function on or off. If captions are not available, they will not be displayed on the screen. NN The Caption feature does not work in Component or HDMI modes. ●● Caption Mode: You can select the desired caption mode. NN The availability of captions depends on the program being broadcasted.
■■ Auto Protection Time for LED TV ●● Auto Protection Time (Off / 2 hours / 4 hours / 8 hours / 10 hours): If the screen remains idle with a still image for a certain period of time defined by the user, the screen saver is activated to prevent the formation of ghost images on the screen.
■■ Screen Burn Protection for PDP TV OO MENUm → System → Screen Burn Protection → ENTERE To reduce the possibility of screen burn, this unit is equipped with screen burn prevention technology. The Time setting allows you to program the time between movement of the picture in minutes. ●● Pixel Shift (Off / On): Using this function, you can minutely move pixels ◀ on the PDP in horizontal or vertical direction to minimize after image on the screen.
NN The Pixel Shift value may differ depending on the monitor size (inches) and mode. NN This function is not available in the Screen Fit mode. ●● Auto Protection Time (Off / 10 min. / 20 min. / 40 min. / 1 hour): If the screen remains idle with a still image for a certain period of time defined by the user, the screen saver is activated to prevent the formation of ghost images on the screen.
NN The after-image removal function has to be executed for a long time (approximately 1 hour) to effectively remove after-images on the screen. If the after-image is not removed after performing the function, repeat the function again. NN Press any key on the remote control to cancel this feature. ●● Side Gray (Light / Dark): When you watch TV with the screen ratio set to 4:3, the screen is prevented from any damage by adjusting the white balance on both extreme left and right sides.
■■ General ●● Game Mode (Off / On): When connecting to a game console such as PlayStation™ or Xbox™, you can enjoy a more realistic gaming experience selecting the game menu. NN NOTE ●● Precautions and limitations for game mode –– To disconnect the game console and connect another external device, set Game Mode to Off in the setup menu. ◀ –– If you display the TV menu in Game Mode, the screen shakes slightly.
●● Game Mode is not available when the input source is set to TV. ●● After connecting the game console, set Game Mode to On. Unfortunately, you may notice reduced picture quality. ●● If Game Mode is On: –– Picture Mode is set to Standard and Sound Mode is set to Movie.
●● Panel Lock (Off / On): Lock or unlock all the keys on the panel. ●● Boot Logo (Off / On): Display Samsung logo when the TV is turned on. ●● AV Color System (Auto / PAL-M / PAL-N / NTSC): Normally the TV can receive image and sound with good quality when in the mode Auto. This mode detects the signal color system automatically. In case of some signal reception with color unsatisfactory, select the AV Color System Mode to PAL-M, PAL-N or NTSC.
■■ DivX® Video On Demand Shows the registration code authorized for the TV. If you connect to the DivX web site and register with 10-digit registration code, you can download the VOD activation file. Once you play it using Media Play, the registration is completed. NN For more information on DivX® VOD, visit “http://vod.divx.com”.
❑❑ Support Menu OO MENUm → Support → ENTERE ■■ e-Manual You can read the introduction and instructions about the TV features stored in your TV. NN For the detailed information about e-Manual Screen, refer to “How to view the e-Manual” in User Manual.
■■ Self Diagnosis ●● Picture Test (Yes / No): Use to check for picture problems. If the problem continues to occur, check the color pattern. Yes: If the test picture does not appear or there is noise in the test picture, select Yes. There may be a problem with the TV. Contact Samsung’s Call Center for assistance. ◀ No: If the test picture is properly displayed, select No. There may be a problem with your external equipment. Please check your connections.
●● Sound Test (Yes / No): Use the built-in melody sound to check for sound ◀ problems. NN If you hear no sound from the TV’s speakers, before performing the sound test, make sure Speaker Select is set to TV Speaker in the Sound menu. NN The melody will be heard during the test even if Speaker Select is set to External Speaker or the sound is muted by pressing the MUTE button. Yes: If you can hear sound only from one speaker or not at all during the sound test, select Yes.
●● Signal Information: (digital channels only) An HD channel’s reception quality is either perfect or the channels are unavailable. Adjust your antenna to increase signal strength. ●● Reset: Reset all settings to the factory defaults except network settings. NN The PIN input screen appears before the setup screen. NN Enter your 4-digit PIN. Change the PIN using the Change PIN option. ●● Troubleshooting: If the TV seems to have a problem, refer to this description.
■■ Software Upgrade Software Upgrade can be performed by downloading the latest firmware from “www.samsung.com”, to a USB memory device. Current Version-the software already installed in the TV.
Installing the Latest Version ●● By USB: Insert a USB drive containing the ◀ TV Side Panel firmware upgrade file, downloaded from www.samsung.com, into the TV. Please be careful not to disconnect the power or remove the USB drive until upgrades are complete. The TV will be turned off and on automatically after completing the firmware * The placement of the USB port may upgrade. When software is upgraded, differ depending on the model.
●● Online for PDP 490 series : Upgrade the software using the Internet. NN First, configure your network. For detailed procedures on using the Network Setup, refer to the “Network Settings” instructions. NN If the Internet connection does not operate properly, the connection may be broken. Please retry downloading. If the problem persists, download by USB and upgrade. ●● By Channel: Upgrade the software using the broadcasting signal.
●● Standby Mode Upgrade(Off / 1 hour later / 2 hours later / 12:00 am / 02:00 am / 12:00 pm / 02:00 pm): A manual upgrade will be automatically performed at selected time. Since the power of the unit is turned on internally, the screen may be turned on slightly for the product. This phenomenon may continue for more than 1 hour until the software upgrade is complete.
■■ Contact Samsung View this information when your TV does not work properly or when you want to upgrade the software. You can find information regarding our call centers, and how to download products and software.
■■ Contents Home You can enjoy useful and various contents.
❑❑ Using the 3D function ■■ for PDP 490 series 3D OO MENUm → Picture → 3D → ENTERE This exciting new feature enables you to view 3D content. To fully enjoy this feature, you must purchase a pair of Samsung 3D Active Glasses to view 3D video. Samsung 3D Active Glasses are sold separately. For more detailed purchasing information, contact the retailer where you purchased this TV.
Viewing TV using the 3D function IMPORTANT HEALTH AND SAFETY INFORMATION FOR 3D PICTURES. Read and understand the following safety information before using the TV’s 3D function. [[WARNING ●● Some viewers may experience discomfort while viewing 3D TV such as dizziness, nausea and headaches. If you experience any such symptom, stop viewing 3D TV, remove 3D Active Glasses and rest. ◀ ●● Watching 3D images for an extended period of time may cause eye strain.
●● A responsible adult should frequently check on children who are using the 3D function. If there are any reports of tired eyes, headaches, dizziness, or nausea, have the child stop viewing 3D TV and rest. ●● Do not use the 3D Active Glasses for other purposes (such as general eyeglasses, sunglasses, protective goggles, etc.) ●● Do not use the 3D function or 3D Active Glasses while walking or moving around.
●● 3D Mode: Select the 3D input format. NN If you want to feel the 3D effect fully, please wear the 3D Active Glasses first, and then select 3D Mode from the list below that provides the best 3D viewing experience. NN When watching 3D images, turn on 3D Active Glasses. 3D Mode Off ◀ Operation Off Turns the 3D function off. 2D → 3D Changes a 2D image to 3D. Side by Side Displays two images next to each other. Top & Bottom Displays one image above another.
NN Some file format may not be supported the "2D → 3D". NN When you watch 3D images under flickering lighting such as a fluorescent lamp (50Hz ~ 60Hz ) or a 3 wavelength lamp, you may notice some screen flickering. If this occurs, dim or turn off the light. ●● 3D Perspective (-5 ~ +5): Adjust overall 3D perspective of on-screen image. ●● Depth (1~10): Adjust overall depth. ●● L/R Change (L/R Image / R/L Image): Swap the left and right pictures.
Support resolution (16:9 only) ●● HDMI Source / ◀ Frame Packing Resolution Frequency (Hz) 1280 x 720p 59.94 / 60 Hz 1920 x 1080i 59.94 / 60 Hz 1920 x 1080p 23.98 / 24 / 29.97 / 30 / 59.94 / 60 Hz 1280 x 720p 59.94 / 60 Hz 1920 x 1080i 59.94 / 60 Hz 1920 x 1080p 23.98 / 24 / 29.
●● Components & DTV Source Components DTV ◀ Resolution Frequency (Hz) 1280 x 720p 59.94 / 60 Hz 1920 x 1080i 59.94 / 60 Hz 1920 x 1080p 23.98 / 24 / 29.97 / 30 / 59.94 / 60 Hz 1280 x 720p 59.94 / 60 Hz 1920 x 1080i 59.94 / 60 Hz ●● Videos / Photos (In AllShare Play) Refer to "Supported Subtitle and AllShare Play file formats" in the Other Information section.
How to watch the 3D image ●● Method 1 NN Some 3D modes may not be available depending on the format of the image source. NN To watch in 3D, wear 3D Active Glasses and press the power button on the glasses. ◀ 1. Press the MENU button on your remote, use the ▲ or ▼ button to select Picture, and then press the ENTERE button. 2. Use the ▲ or ▼ button to select 3D, and then press the ENTERE button.
3. Use the ▲ or ▼ button to select 3D Mode, and then press the ENTERE button. 4. Using the ◄ or ► buttons on your remote control, select the 3D Mode of the image you want to view. ●● Method 2 ◀ 1. Press the X button on your remote, and then you can view the 3D image. 2. If you want to change 3D options (such as 3D Perspective), press the MENU button on your remote, and then select Picture. 3. Go to Step 3 in the “Method 1”, and follow the directions from that point on.
Before using 3D function... NN NOTE ●● 3D Mode is set to Off automatically when you access AllShare Play or e-Manual functions. ●● 3D Mode is set to memorized configuration value automatically, when changing the input source. ◀ ●● Some Picture functions are disabled in 3D mode. ●● PIP is not supported in 3D mode. ●● 3D Active Glasses from Samsung’s previous product (IR type) or other manufacturers not be supported.
●● The 3D Active Glasses may not work properly if there is any other 3D product or electronic devices turned on near the glasses or TV. If there is a problem, keep other electronic devices as far away as possible from the 3D Active Glasses. ●● Be sure to stay within the viewing angle and optimum TV viewing distance when watching 3D pictures. ●● Otherwise, you may not be able to enjoy proper 3D effects. ●● The ideal viewing distance should be three times or more the height of ◀ the screen.
❑ Using the Media Contents Enjoy photos, music and movie files saved on a USB Mass Storage Class (MSC) device. 1. Press the CONTENT button to select Media Play / AllShare Play for PDP 490 series . ◀ Contents Home 2. Press ▲/▼ button to select desired menu (Videos, Photos, Music), then press the ENTERE button. 3. Press ▲/▼ button to select desired device, then press the ENTERE button again.
❑❑ Connecting a USB Device 1. Turn on your TV. TV Side Panel 2. Connect a USB device containing photo, music and movie files to the USB port on the side of the TV. ◀ 3. When USB is connected to the TV, popup window appears. You can select the Videos, Photos or Music directly. NN It might not work properly with unlicensed multimedia files. English * The placement of the USB port may differ depending on the model.
NN Need-to-Know List before using Media Contents ●● MTP (Media Transfer Protocol) is not supported. ●● The file system supports NTFS (Read Only), FAT16 and FAT32. ●● Certain types of USB Digital camera and audio devices may not be compatible with this TV. ●● Media Contents only supports USB Mass Storage Class (MSC) devices. ◀ MSC is a Mass Storage Class Bulk-Only Transport device. Examples of MSC are Thumb drives, Flash Card Readers (USB HUB are not supported).
●● The higher the resolution of the image, the longer it takes to display on the screen. ●● The maximum supported JPEG resolution is 15360 x 8640 pixels. ●● For unsupported or corrupted files, the “Not Supported File Format” message is displayed. ●● MP3 files with DRM that have been downloaded from a non-free site ◀ cannot be played.
●● The power-saving mode of some external hard disk drives may be released automatically when connected to the TV. ●● If a USB extension cable is used, the USB device may not be recognized or the files on the device may not be read. ●● If a USB device connected to the TV is not recognized, the list of files on the device is corrupted or a file in the list is not played, connect the USB device to the PC, format the device and check the connection.
Disconnecting a USB Device ●● Method 1: Using the SOURCE button. 1. Press the SOURCE button. 2. Select a desired USB device, and then press the TOOLS button. The Tools menu appears. 3. Select Safely Remove USB, and then wait until the selected USB device is disconnected. You can remove a USB device from the TV.
●● Method 2: Using the Media Play / AllShare Play for PDP 490 series home screen. ◀ 1. Go to Media Play / AllShare Play 2. Select any category, and then press the ENTERE button. 3. Select a desired USB device, and then press the TOOLS button. The Tools menu appears. 4. Select Safely Remove USB, and then wait until the selected USB device is disconnected. You can remove a USB device from the TV. for PDP 490 series home screen.
❑❑ Connecting to the PC through network for PDP 490 series You can play pictures, music and videos saved on your PC through a network connection in the AllShare Play mode over your TV. NN If you want to use AllShare Play to play files saved on your PC over your TV, you should download “AllShare PC Software” and users manual from “www. samsung.com”. 1. For more information on how to configure your network, refer to ‘Network Connection’. ◀ –– You are recommended to locate both TV and PC in same subnet.
2. Using a LAN cable, connect between the external modem and the PC onto which the AllShare PC Software program will be installed. –– You can connect the TV to the PC directly without connecting it through a Sharer (Router). NN Functions that are not supported when connecting to a PC through a network: ●● The Background Music On and Background Music Setting functions. ●● The � (REW) or µ (FF) button while a movie is playing. ◀ NN The DivX DRM, Multi-audio, embedded caption does not supported.
NN When you use AllShare Play mode through a network connection, according to functions of the provided server: ●● The sorting method may vary. ●● The � (REW), µ (FF) or � (Pause) buttons may not work depending on the content information. NN If you experience any file stuttering issue while playing a video over a wireless network, we recommend using a wired network.
❑ Screen Display Move to the desired file using the ◄/►/▲/▼ buttons and then press the ENTERE or � (Play) button. The file is played. The screen may differ depending on the way to enter the screen. * The displayed image may differ depending on the model. ◀ Information: You can ascertain the selected device name, contents mode, folder/file name, page. AllShare Play / Videos / SUM / 500 Days of... .avi 1/15 Information: You can ascertain the name, size and created date of the selected file.
■■ Videos Playing Video 1. Press the ◄/►/▲/▼ button to select the desired video in the file list. 2. Press the ENTERE button or � (Play) button. –– The selected file name is displayed on the top with its playing time. –– If video time information is unknown, play time and progress bar are not displayed. ◀ –– During video playback, you can search using ◄ and ► button. –– You can use (�) (REW) and (µ) (FF) buttons during playback.
●● Supported Subtitle Formats –– External ◀ Name File extension MPEG-4 timed text .ttxt SAMI .smi SubRip .srt SubViewer .sub Micro DVD .sub or .txt SubStation Alpha .ssa Advanced SubStation Alpha .ass Powerdivx .
●● Supported Video Formats File Extension ◀ *.avi *.mkv *.asf *.wmv *.mp4 *.3gp *.vro *.mpg *.mpeg *.ts *.tp *.trp *.mov *.flv *.vob *.svi *.m2ts *.mts *.divx Container Video Codec Resolution Frame rate (fps) Bit rate (Mbps) Audio Codec DivX 3.11/4.x/5.x/6.x 1920 x 1080 MPEG4 SP/ASP AVI MKV ASF MP4 3GP VRO VOB PS TS 30 H.264 BP/MP/HP Motion JPEG 640 x 480 6~30 8 Window Media Video v9 MPEG2 1920 x 1080 MPEG1 English 30 AC3 LPCM ADPCM (IMA, MS) AAC HE-AAC WMA DD+ MPEG(MP3) DTS Core G.
Other Restrictions ●● Video content will not play, or not play correctly, if there is an error in the content or the container. ●● Sound or video may not work if the contents have a standard bit rate/frame rate above the compatible Frame/sec listed in the table seen on last page. ●● If the Index Table is in error, the Seek (Jump) function is not supported. ●● When playing the video through network, it may not work depending on the ◀ network status.
Video decoder ●● ●● Supports up to H.264, Level 4.1 ●● GMC is not supported. Audio decoder H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not supported. ◀ ●● WMA 10 Pro supports up to 5.1 channel and M2 profile. (LBR mode of M0 is not supported) ●● WMA lossless audio is not supported.
■■ Photos Viewing a Photo (or Slide Show) 1. Press the ◄/►/▲/▼ button to select the desired photo in the file list. 2. Press the ENTERE button. NN When you press the � (Play) button in the file list, slide show will be started immediately. NN During the slide show, all files in the file list will be displayed in order. ◀ NN During the slide show, you can adjust the slide show speed using π (REW) or µ (FF) button. NN You can move to other file using ◄ or ► button.
●● Supported Photo Formats File Extension Type Resolution *.jpg JPEG 15360x8640 *.bmp BMP 1920x1080 *.
■■ Music Playing Music 1. Press the ◄/►/▲/▼ button to select the desired Music in the file list. 2. Press the ENTERE button or � (Play) button. –– You can use � (REW) and µ (FF) buttons during playback. NN Only displays the files with supported music file extension. Other file extensions are not displayed, even if they are saved on the same USB device. ◀ NN If the sound is abnormal when playing music files, adjust the Equalizer in the ▶ Sound menu.
NN Using the playback menu –– Press the ◄/► button to select the desired menu. ●● Play / Pause: You can start or stop a music. Alternatively, the ∂ or ∑ button on the remote. ●● Repeat Mode (Off / One Song / All): You can play music files repeatedly. ●● Shuffle Mode (Off / On): You can play the music randomly. ●● Sound Mode (Standard / Music / Movie / Clear Voice / Amplify): ◀ You can adjust the sound setting.
●● Supported Music Formats File Extension Type Codec *.mp3 MPEG MPEG1 Audio Layer 3 MPEG4 AAC FLAC FLAC Seek is not supported. Supports up to 2ch. *.ogg OGG Vorbis *.wma WMA WMA Supports up to 2ch. WMA 10 Pro supports up to 5.1 channel and M2 profile. (LBR mode of M0 is not supported) *.m4a *.mpa *.aac *.3ga *.
❑❑ Media Contents - Additional Functions Playing the selected Videos/Music/Photos files 1. Press the TOOLS button at each main screen and select Selection Play. 2. Select the desired files. NN The check box appears to the left of the selected files. ◀ 3. Press the ► button to select Play, then press the ENTERE button. NN You can select or deselect all files pressing the Select All / Deselect All.
Videos/Music/Photos Play Option menu During playing a file, press the TOOLS button. Category Operation Videos Title Search You can move the other file directly. c Time Search You can search the video using ◄ and ► button at one minute interval or entering the number directly. c Photos Music NN It may not be supported depending on the input source. ◀ Repeat Mode You can play movie files repeatedly. c Picture Size You can adjust the picture size to your preference.
Category ◀ Operation Videos Photos Picture Mode You can adjust the picture setting. c c Sound Mode You can adjust the sound setting. c c Audio Language You can change the audio language if the video has more than one language. c Subtitle You can set subtitles on/off. c Subtitle Settings You can play the video with subtitles. This function only works if the subtitles are the same file name as the video. c Start Slide Show / Stop Slide Show You can start or stop a slide show.
Category ◀ Operation Videos Photos Slide Show Speed You can select the slide show speed during the slide show. c Background Music On / Background Music Off You can set on/off background music when watching a slide show. c Background Music Setting You can select background music when watching a slide show. c Zoom You can zoom into images in full screen mode.
Category Operation Videos Photos Music Rotate You can rotate images in full screen mode. Edit Playlist You can edit the play list when playing the desired music. c Selection Play Select and play multiple files. c Information You can see detailed information about the played file.
❑❑ Using the DLNA Functions for PDP 490 series You can play media contents including videos, photos and music saved on your mobile phones or the other devices (such as your PC) by controlling them on the TV via the network. NN For more information, visit “www.samsung.com” or contact the Samsung call center. Mobile devices may need additional software installation. For details, refer to each device’s user’s guide.
NN By connecting your Samsung TV to a network via AllShare Play, you can use Samsung’s original functions as follows: ◀ –– –– –– –– –– –– –– –– Playback of various video formats (DivX, MP4, 3GPP, AVI, ASF, MKV, etc.
Playing the media contents saved on the devices 1. Connect the mobile phone or other devices which support AllShare Play function, and then play the media contents of each device. The popup screen appears on the bottom of your TV. 2. Select the Allow to accept the connected devices. The media contents of the devices can be playing on your TV. NN You can find the allowed devices on the AllShare Settings.
Using the AllShare Play function, play the media contents of the devices connected to DLNA function. 1. Press the CONTENT button to select AllShare Play. 2. Press ▲/▼ button to select desired menu (Videos, Photos, Music), then press the ENTERE button. 3. When the DLNA device is selected, press the ENTERE button again. 4. Press the ◄/►/▲/▼ button to select the desired file. ◀ 5. Press the ENTERE button.
NN NOTE ●● Contents may not be played on your TV depending on their resolution and format. ●● The ENTERE and ◄/► buttons may not work depending on the type of media content. ●● Using the mobile device, you can control the media playing. For details, refer to each mobile’s user’s guide.
Using the AllShare Settings function OO MENUm → Network → AllShare Settings → ENTERE Shows a list of mobile phones or connected devices which have been set up with this TV for using the AllShare Settings function. NN The AllShare Settings function is available in all devices which support DLNA DMC. ◀ ●● Allow / Deny: Allows/Blocks the devices. ●● Delete: Deletes the devices from the list. NN This function only deletes the name of the devices from the list.
❑❑ Troubleshooting If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, visit samsung.com, then click on Support, or call Samsung customer service. Issues Poor picture Solutions and Explanations First of all, please perform the Picture Test and confirm that your TV is properly displaying the test image.
Issues The TV image does not look as good as it did in the store. Solutions and Explanations • If you have an analog Cable/Set top box, upgrade to a digital set top box. Use HDMI or Component cables to deliver HD (high definition) picture quality. • Cable/Satellite subscribers: Try HD stations from the channel line up. • Air/Cable Antenna connection: Try HD stations after performing Auto tuning. NN Many HD channels are up scaled from SD(Standard Definition) contents.
Issues The picture is distorted: macroblock error, small block, dots, pixelization. Solutions and Explanations • Compression of video contents may cause picture distortion, especially in fast moving pictures such as sports and action movies. • Low signal level can cause picture distortion. This is not a TV problem. • Mobile phones used close to the TV (up to 3.3 ft) may cause noise in picture on analog and digital TV. ◀ Color is wrong or missing.
Issues There is poor color or brightness. Solutions and Explanations • Adjust the Picture options in the TV menu. (go to Picture Mode / Color / Brightness / Sharpness) • Adjust Energy Saving option in the TV menu (go to MENU - System - Eco Solution - Energy Saving) • Try resetting the picture to view the default picture setting. (go to MENU - Picture - Reset Picture) ◀ There is a dotted line on the edge of the screen. • If the picture size is set to Screen Fit, change it to 16:9.
Issues Solutions and Explanations When changing channels, • If connected to a cable box, please try to reset it. (reconnect the the picture freezes or is AC cord and wait until the cable box reboots. It may take up to 20 distorted or delayed. minutes) • Set output resolution of the cable box to 1080i or 720p. Sound Problem • First of all, please perform the Sound Test to confirm that your TV audio is properly operating.
Issues The picture is good but there is no sound. Solutions and Explanations • Set the Speaker Select option to TV Speaker in the Sound menu. • If you are using an external device, check the device’s audio output option (ex. you may need to change your cable box’s audio option to HDMI when you have a HDMI connected to your TV). • If you are using a DVI to HDMI cable, a separate audio cable is required. • Reboot the connected device by reconnecting the device’s power cable.
Issues Solutions and Explanations No Picture, No Video The TV will not turn on. • Make sure the AC power cord is securely plugged into the wall outlet and the TV. • Make sure the wall outlet is working. • Try pressing the POWER button on the TV to make sure the problem is not the remote control. If the TV turns on, refer to ‘Remote control does not work’ below. ◀ The TV turns off automatically. • Ensure the Sleep Timer is set to Off in the System menu.
Issues There is no picture/video Solutions and Explanations • Check cable connections. (remove and reconnect all cables connected to the TV and external devices). • Set your external device’s (Cable/Set top box, DVD, Blu-ray etc) video outputs to match the connections to the TV input. For example, if an external device’s output is HDMI, it should be connected to an HDMI input on the TV. • Make sure your connected devices are powered on.
Issues Solutions and Explanations Antenna(Air / Cable) Connection The TV is not receiving all channels. • Make sure the coaxial cable is connected securely. • Please try Auto Tuning to add available channels to the channel list. go to MENU - Channel - Auto Tuning then select Auto and make sure the correct Cable TV signal type is set in the menu. • Verify the Antenna is positioned correctly. ◀ No Caption on digital channels. • Check Caption setup menu.
Issues Solutions and Explanations Network Connection for PDP 490 series The wireless network connection failed. • Samsung Wireless LAN adapter is required to use a wireless network. • Make sure the TV is connected to a wireless IP sharer (Router). Software Upgrade over the network fails. • Try Network Settings in Network menu. • If you have latest SW version, SW upgrade will not proceed.
Issues Solutions and Explanations Others Purple/green rolling • Remove the left and right audio connections from the set-tophorizontal bars and box. If the buzzing stops, this indicates that the set-top-box has a buzzing noise from the TV grounding issue. Replace the Component video cables with an HDMI speakers with Component connection. cable connection. The picture will not display • HD channels will have black bars on either side of the screen when in full screen.
Issues Plasma TV is making humming noise. for PDP TV Solutions and Explanations ●● Plasma TVs typically make a soft humming sound. This is normal. It’s caused by the electrical charges that are used to create the images on the screen. ●● If the humming sound is loud, you may have set the brightness on the TV too high. Try setting the brightness lower. ●● You can also have loud humming if the back of your Plasma TV is too close to a wall or other hard surface. Also try rerouting your connection cables.
Issues The remote control does not work. Solutions and Explanations • Replace the remote control batteries with correct polarity (+/–). • Clean the transmission window located on the top of the remote control. • Try pointing the remote control directly at the TV from 5~6 feet away. The cable/set top box remote control does not turn the TV on or off, or adjust the volume. ◀ • Program the Cable/Set top box remote control to the operate the TV.
Issues ◀ Solutions and Explanations There is a plastic smell from the TV. • This smell is normal and will dissipate over time. TV Signal Information is unavailable in the Self Diagnosis Test menu. • This function is only available with digital channels from an Antenna / RF / Coax connection. TV is tilted to the right or left side. • Remove the stand base from the TV and reassemble it. The Channel menu is grey • The Channel menu is only available when the TV source is selected. out (unavailable).
Issues Solutions and Explanations Your settings are lost after • If TV is in the Store Demo mode, it will reset audio and picture 30 minutes or every time settings every 30 minutes. Please change from Store Demo mode the TV is turned off. to Home Use mode in the Setup procedure. Press the SOURCE button to select TV mode, go to MENU → System → Setup → ENTERE. You have intermittent loss of audio or video. ◀ • Check the cable connections and reconnect them.
Issues ◀ Solutions and Explanations The PIP menu is not available. • PIP functionality is only available when you are using a HDMI or components source. You see small particles when you look closely at the edge of the frame of the TV. • This is part of the product’s design and is not a defect. POP (TV’s internal banner ad) appears on the screen. • Select Home Use under Setup mode. For details, refer to Setup (Initial Setup). The message “This file may not be playable properly.” appears.
❑❑ Anti-theft Kensington Lock The Kensington Lock is not supplied by Samsung. It is a device used to physically fix the system when using it in a public place. The appearance and locking method may differ from the illustration depending on the manufacturer. Refer to the manual provided with the Kensington Lock for additional information on proper use. NN Please find a “K” icon on the rear of the TV. A kensington slot is beside the “K” icon.
2. Slide the end of the cable with the lock attached through the looped end of the Kensington lock cable. 3. Insert the locking device into the Kensington slot on the product. 4. Lock the lock. NN NOTE ●● These are general instructions. For exact instructions, see the User manual supplied with the locking device. ◀ ●● The locking device has to be purchased separately. ●● The location of the Kensington slot may be different depending on the TV ▶ model.
❑❑ License TheaterSound, SRS and symbol are trademarks of SRS Labs, Inc. TheaterSound technology is incorporated under license from SRS Labs, Inc. SRS TheaterSound™ provides the most immersive surround sound experience from the TVs built-in speakers, while maintaining steady volume and delivering rich bass and clear dialog. ◀ Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license under U.S.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. DivX Certified® to play DivX® video up to HD 1080p, including premium content. ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays DivX video. Visit divx.