2009 Samsung TV F/W Upgrade Guide Samsung Electronics
¾ Model List LCD TV . LB610 series : LN40B610A5F, LN46B610A5F, LN52B610A5F . LB630 series : LN40B630N1F, LN46B630N1F, LN52B630NF . LB640 series : LN32B640R3F, LN40B640R3F, LN46B640R3F LN55B640R3F . LB650 series : LN32B650T1F, LN37B650T1F .
Step1. How to prepare the USB Memory Drive 1. Save the firmware file into your computer. File Name : 2009 DTV 128M firmware.exe 2. Connect the USB Memory Drive to the USB port of your PC. Copy the file into the USB Memory Drive. 3. Go to the USB Memory Drive and then double click the file. 4. Click on the “Unzip” button. 5. Unzipping is in progress. 6. After completing, click on the 7. A folder containing the firmware files “OK” and “Close” buttons. has been added to the USB memory drive.
9. Turn your TV on, and then insert the USB Memory Drive containing the firmware into the USB port on the rear of the TV 10. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Support”, then press the ENTER button 12. The message “Scanning for USB. 11. Press the ▲ or ▼ button to select “Software Upgrade”, then press the ENTER button. 13. Then, the message “Upgrade It may take up to 30 seconds” Version XXXX to version XXXX? is displayed.
※ Do not pull the USB drive out or unplug the power cable until complete 14. When the software upgrade is complete; the TV will turn off and then back on by itself. Proceed with the ‘Plug & Play’ setup. 15. Once ‘Plug & Play’ is complete; “Enjoy your watching.” is displayed. Press the ‘Enter’ key and you are done. ※ Important If the firmware version you downloaded from the Samsung website or received from Samsung is older than or has a lower version number than the version on your TV, do not install it.
