User Manual (ver.1.0)

76 77
Picture Quality
Screen Menu > Picture
PDP 5500, LED 6400 series and above
Choose a Picture Mode and then select the following options to display a slide bar that allows the
corresponding setting to be adjusted. Adjust the value by dragging left/right on the touch pad and
change the setting by dragging up/down on the touch pad. Adjusted values are applied to the current
source and will remain in effect the next time the source is selected. When connected to a computer
via an HDMI-to-DVI cable, only the Color and Tint (G/R) adjustment options can be chosen.
LED 4300 - 6300 series
Choose a Picture Mode and then select the following options to display a slide bar that allows the
corresponding setting to be adjusted. Adjust the value by pressing the left/right arrow button on the
remote and change the setting by pressing up/down arrow button on the remote. Adjusted values
are applied to the current source and will remain in effect the next time the source is selected. When
connected to a computer via an HDMI-to-DVI cable, only the Color and Tint (G/R) adjustment options
can be chosen.
●
Backlight
Adjusts the brightness of individual pixels. Decreasing the brightness reduces power
consumption. This option is only available for LED TVs.
●
Cell Light
Adjusts the brightness of the panel. Decreasing the brightness reduces power consumption. This
option is only available for PDP TVs.
●
Contrast
Adjusts the screen contrast.
Try Now
●
Brightness
Adjusts the overall brightness.
Try Now
●
Sharpness
Sharpens or dulls the edges of objects.
Try Now
●
Color
Adjusts the overall color saturation.
Try Now
●
Tint (G/R)
Adjusts the ratio of green to red. Increase the green value to saturate the greens and the red
value to saturate the reds.
Try Now
Applying the Current Picture Quality Setting to Another Input
Screen Menu> Picture > Apply Picture Mode
Try Now
You can apply the picture quality setting that you configured for the TV to all external devices
connected to the TV.
To apply the setting to all external devices connected to the TV, select All Sources. To only apply the
setting to the current input, select Current Source.