User Manual (ver.1.0)

▶
English
▶
Issues Solutions and Explanations
PC Connection
A “Mode Not Supported”
message appears.
•
Set your PC’s output resolution so it matches a resolution supported by the
T V.
“PC” is always shown on
the source list, even if a PC
is not connected.
•
This is normal. “PC” is always shown in the source list, regardless of whether
a PC is connected.
The video is OK but there
is no audio.
•
If you are using an HDMI connection, check the audio output setting on your
PC.
Network Connection
The wireless network
connection failed.
•
Make sure the Network Connection is set to Wireless(General).
•
Make sure the TV is connected to a wireless IP sharer (router).
Software Upgrade over the
network fails.
•
Run Network Test in Network menu to confirm the connection.
•
If you have latest Software (SW) version, SW upgrade will not proceed.