Installation Guide (ver.1.0)

BN68-05035A-04
QUICK START
GUIDE
Welcome to your new Smart TV!
The following instructions cover assembling, connecting, and setting up your new TV. Make
sure you have the accessories listed below.
Included in this box
Remote Control Stand Parts and Cables
x 4
Smart Touch Control Wall mount adapter Stand Mount IR extender
Batteries (AAA x 2) Power cord RCA adapter
Also included: User Manual, Regulatory Guide, 3D Active Glasses
Step
1
Attach the TV to
the Stand
Step
2
Connect video
devices
Step
3
Using the Smart
Touch Control
Step
4
Power on and
start the initial
setup
Warning: Screens can be damaged
from direct pressure when handled
incorrectly. We recommend lifting the
TV by the edges, as shown.
Step 1 Attach the TV to the Stand
1A
Lay the TV on a soft surface, screen side down.
Use the packing material to protect the screen.
1B
Screws
x 8
Base
Find the stand base and screws in the box and
set aside.
REQUIRED TOOLS: a Phillips head screwdriver and a soft, flat surface larger than the TV
(such as the box).
1C
Fit the stand and mount together, making sure
the notch on the mount aligns with the stand.
1D
Insert 4 screws and secure the stand to the
mount.
40 - 55 inches models:
x4 (M4 X L12)
60 inches and above models:
x4 (M4 X L10)
1E
1 2 3
Holding the stand parallel to the screen, slide
the stand into the notches on the back of the
TV.
1F
Insert 4 screws and secure the stand to the TV.
40 - 55 inches models:
x4 (M4 X L12)
60 inches and above models:
x4 (M4 X L10)
[UF7500_QSG]BN68-05035A-04ENG.indb 2 2013-10-28 �� 6:30:50