Unpack Taking the TV Out of the Box •• Warning: Do not touch the TV’s screen when you take it out of the box. Hold it by its edges only. If you touch the screen, you can cause the TV panel to crack. •• Recommendation 1: Two people should remove the TV from the box as shown above. When removing the TV, hold it by its edges only. Do not touch the screen. •• Recommendation 2: If only one person is available to remove the TV from the box, remove it as shown in the illustration above.
Assemble Stand and styrofoam shape may vary differ depending on the model. or 1 Locate the Base, Stand Mount, and Screws in the box and set them aside. ✎✎ Remove the top portion of the box to locate the stand parts. 2 Place the TV on a soft surface, screen side down. Use the packing material to protect the screen. 3 Fit the stand and mount together, making sure the notch on the mount aligns with the stand. [UH6203-QSG]BN68-06331A-01ENG.
4 Insert 4 screws and secure the Base to the Stand Mount. 5 Holding the stand parallel to the screen, slide the stand into the notches on the back of the TV. 6 Insert 4 screws, and secure the stand to the TV. [UH6203-QSG]BN68-06331A-01ENG.
3 Connect * Recommended Connections After you have connected all your external devices, plug the TV’s power cord into the back of the TV. DO NOT plug it into a wall outlet until you have reached Section 6, Initial Setup. Connection panel on the back of the TV Internet Connect here with an Ethernet cable or wirelessly later during the Initial Setup. Cable/Satellite/DVR TV signal Connect your Cable box or digital video recorder with an HDMI cable. Connect your coaxial cable to the Antenna In port.
4 Gear * Recommended Connections Game console Connect your game console or DVR using an HDMI cable. Audio Connect a receiver/home theater using an optical audio cable. [UH6203-QSG]BN68-06331A-01ENG.
5 Cable/SAT box (Cable or Satellite box) You can control your cable or satellite box with the Samsung Smart Control. To establish control, you must first set up the IR extender cable. If you don’t have an cable or satellite box, skip this section. 1 Connect the IR extender cable to the TV’s IR output connector. TV’s IR Out Connect the IR extender cable to the back of the TV. Cable or satellite box Position the transmitter end 4 inches in front of the cable or satellite box.
6 Initial Setup When you turn on your TV for the first time, it immediately starts the Initial Setup. During Initial Setup, your TV connects to your home network, implements Smart Hub agreements, links to the source of your live TV signal, and sets up control of your Cable or Satellite box. Information You Need Internet Access Have the following information on hand before you turn on your TV for the first time: •• Your wireless network’s password. (Make sure your network is on.
Common issues Can’t Connect to Network or Apps (For Internet supported models only) •• Make sure the TV has a network connection (MENU > Network > Network Status) •• Contact your Internet service provider. No Picture/Sound or Distorted Picture/Sound from an External Device •• Make sure your connection to the device is correct. •• Perform a TV Self Diagnosis to identify the problem (MENU > Support > Self Diagnosis > Sound or Picture Test) •• Change the picture size. (Use the “P.
More help REQUIRE ASSISTANCE WITH YOUR PRODUCT? Tech Support and Chat •• www.samsung.com/support Purchase any Samsung TV and you’ll enjoy the convenience of Samsung Service. If you require any assistance with your TV, first try any of Samsung’s helpful support options listed here. Remote Support •• Samsung Remote Support service Troubleshooting •• For more quick solutions to common issues, see Troubleshooting and Maintenance in the user’s manual.
Samsung Smart TV Setup Guide BN68-06331A-01 [UH6203-QSG]BN68-06331A-01ENG.
