User Manual

ENGLISH

7979

IEEE 1394 Data Transfer

●

System requirements

■

CPU : faster Intel

Pentium III™ 450Mhz compatible.

■

Operating system : Windows

98SE, ME, XP, Mac OS (9.1~10.2)

■

Main memory : more than 64 MB RAM

■

IEEE1394 add-on card or built in IEEE1394 card

Recording with a DV connection cable (VP-D23i/D24i only)

1. Set the power switch to PLAYER mode.

2. Connect the DV cable (not supplied) from the DV IN/OUT port of

the camcorder to the DV IN/OUT port of the other DV device.

■

Make sure that DV IN appears on the screen.

3. Press the START/STOP button to begin REC PAUSE mode.

■

PAUSE is displayed on the OSD.

4. Start playback on the other DV device while you monitor the picture.

5. Press the START/STOP button to start recording.

■

If you want to pause recording momentarily, press the START/STOP button again.

6. To stop recording, press the (STOP) button.

Reference

■

When using this camcorder as a recorder, the pictures that appear on a monitor may seem uneven,

however recorded pictures will not be affected.

■

Operations are not guaranteed for all of the recommended computer environments mentioned above.

00616E VP-D23(i) UK (60~106) 6/17/03 9:38 AM Page 79