User Manual
Table Of Contents
- WA54R7200A_DC68-04037C-01_EN
- WA54R7200A_DC68-04037C-01_MES
- Información sobre seguridad
- Lo que necesita saber sobre las instrucciones de seguridad
- Símbolos de seguridad importantes
- Precauciones de seguridad importantes
- PROPOSICIÓN 65 DE CALIFORNIA: ADVERTENCIA
- Advertencias fundamentales para la instalación
- Precauciones para la instalación
- Advertencias fundamentales para el uso
- Precauciones de uso
- Advertencias fundamentales para la limpieza
- Instalación
- Antes de comenzar
- Funcionamiento
- Mantenimiento
- Solución de problemas
- Especificaciones
- Información sobre seguridad
English 23
Installation
B C
4. If the washer is not level, turn
the appropriate leveling feet
clockwise (B) to lower the washer, or
counterclockwise (C) to raise the washer
so that it is level.
5. Once you have the washer leveled,
push down on all 4 corners to ensure
that all 4 feet are touching the oor. If
the washer rocks when you push down
on a corner, adjust the leveling foot at
that corner so the foot is rmly on the
oor.
NOTE
• You can also level the washer by lining
a level up with the seam that runs
between the top of the washer and the
body of the washer and checking if the
washer is level on all 4 sides.
• See the diagram above, left. After you
have checked all 4 sides and leveled the
washer, perform Step 5 above.
Untitled-22 23 2019-02-12 4:50:14