User Manual
Table Of Contents
- WA54R7200A_DC68-04037C-01_EN
- WA54R7200A_DC68-04037C-01_MES
- Información sobre seguridad
- Lo que necesita saber sobre las instrucciones de seguridad
- Símbolos de seguridad importantes
- Precauciones de seguridad importantes
- PROPOSICIÓN 65 DE CALIFORNIA: ADVERTENCIA
- Advertencias fundamentales para la instalación
- Precauciones para la instalación
- Advertencias fundamentales para el uso
- Precauciones de uso
- Advertencias fundamentales para la limpieza
- Instalación
- Antes de comenzar
- Funcionamiento
- Mantenimiento
- Solución de problemas
- Especificaciones
- Información sobre seguridad
Before you start
English28
Before you start
STEP 4 Prewash (if necessary)
• To remove stains and dirt on collars, sleeves, hems, and pockets, apply detergent
lightly, let sit for a minute, and then brush off carefully.
• Use powder or liquid detergents. Do not use soap. Soap can remain on the tub after
washing.
• To prewash white socks, sleeves, and collars apply a little detergent, and then brush
carefully.
CAUTION
Make sure the laundry is inserted completely.
• Any exposed part of the laundry can cause damage to the washer or the laundry itself
or cause a water leak.
• Make sure the laundry does not extend past the plastic ring at the top of the tub.
STEP 5 Determine the load capacity
Make sure the laundry does not extend past the plastic ring at the top of the tub. If it does,
it can cause the washing machine to wash improperly or cause damage to the washer or
the laundry itself or cause a water leak.
NOTE
When washing bedding or bedding covers, the wash time may be lengthened or the spin
efciency may be reduced.
For bedding or bedding covers, the recommended load capacity is 7.5 lb (3.5 kg) or less.
CAUTION
If the laundry is unbalanced and the “UB” information code is displayed, redistribute the
load. Unbalanced laundry can reduce spinning performance.
Untitled-22 28 2019-02-12 4:50:16