Washer User manual WA54M8750A* WA8700M_WA54M8750A_DC68-03774B-00_EN.
Contents Contents Safety information 4 What you need to know about the safety instructions Important safety symbols Important safety precautions 4 4 5 Installation 16 Unpacking your washer Overview of your washer Basic location requirements Important note to installer Step-by-step installation 16 17 19 23 23 Operating instructions 31 Loading your washer Getting started 31 32 Washing a load of laundry 33 Control panel Cycle overview Options Samsung Smart Home Washing clothes using the option b
62 Fabric care chart Helping the environment Declaration of conformity Specification sheet Cycle chart 62 64 64 65 66 SAVE THESE INSTRUCTIONS English 3 WA8700M_WA54M8750A_DC68-03774B-00_EN.
Safety information Safety information Congratulations on your new Samsung washer. This manual contains important information on the installation, use and care of your appliance. Please take some time to read this manual to take full advantage of your washer’s many benefits and features. What you need to know about the safety instructions Please read this manual thoroughly to ensure that you know how to safely and efficiently operate the extensive features and functions of your new appliance.
Read all instructions before using the appliance. As with any equipment that uses electricity and moving parts, potential hazards exist. To safely operate this appliance, familiarize yourself with its operation and exercise care when using it. WARNING State of California Proposition 65 Warning (US only) This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Safety information Safety information 10. Under certain conditions, hydrogen gas may be produced in a hot water system that has not been used for 2 weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water system has not been used for 2 weeks or more, before using a washer or combination washer-dryer, turn on all hot water faucets and let the water flow from each for several minutes. This will release any accumulated hydrogen gas.
Never plug the power cord into a socket that is not grounded correctly. Make sure the socket you use is grounded in accordance with local and national codes. Do not install this appliance near a heater or flammable material. Do not install this appliance in a humid, oily, or dusty location, or in a location exposed to direct sunlight or water (rain drops). Do not install this appliance in a location where gas may leak. • This may result in electric shock or fire.
Safety information Safety information Critical usage warnings WARNING If the appliance is flooded, cut the power immediately and contact your nearest service center. If the appliance emits a strange noise, a burning smell, or smoke, unplug the power plug immediately and contact your nearest service center. • Failing to do so may result in electric shock or fire. In the event of a gas leak (such as propane gas, LP gas, etc.), ventilate the area immediately. Do not turn any appliance or light on or off.
Do not insert your hand or a metal object under the washer while it is operating. • This may result in injury. Do not attempt to repair, disassemble, or modify the appliance yourself. • Do not use any fuse (such as copper, steel wire, etc.) other than the standard fuse. • If you need to repair or reinstall the appliance, contact your nearest service center. • Failing to do so may result in electric shock, fire, problems with the product, or injury.
Safety information Safety information • If the washer is used when it is flooded because of a draining problem, it may result in electric shock or fire due to electric leakage. Do not insert your hand under the washer. • This may result in injury. Insert the laundry into the washer completely so that laundry does not get caught in the lid. • If laundry gets caught in the lid, it may result in damage to the laundry or the washer, or result in water leakage.
This may result in electric shock or injury due to water leakage. Do not insert your hand into the detergent dispenser after opening it. • This may result in injury as your hand may be caught. Do not place any non-laundry objects, such as shoes, food waste, or animals into the washer. • This can cause abnormal vibrations that can damage the washer, and, in the case of pets, cause severe injury or death. Do not press the buttons using sharp objects such as pins, knifes, fingernails, etc.
Safety information Safety information • If you wash throw rugs or doormats, the sand will accumulate inside the washer. It may result in error such as no draining. Critical cleaning warnings WARNING Do not clean the appliance by spraying water directly onto it. Do not use the strong acid cleaning agent. Do not use benzene, paint thinner, or alcohol to clean the appliance. • This may result in discoloration, deformation, damage, electric shock, or fire.
Safety information Regulatory notice FCC Notice FCC CAUTION: CAUTION Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of FCC Rules. Operation is Subject to following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received including interference that cause undesired operation.
Safety information Safety information FCC RADIATION EXPOSURE STATEMENT: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated so there is at least 8 inches (20 cm) between the radiator and your body. This device and its antenna(s) must not be colocated or operated in conjunction with any other antenna or transmitter.
The software included in this product contains open source software. You may obtain the complete corresponding source code for a period of three years after the last shipment of this product by sending an email to mailto:oss.request@samsung.com. It is also possible to obtain the complete corresponding source code in a physical medium such as a CD-ROM; a minimal charge will be required. The following URL http://opensource.samsung.
Installation Follow these instructions carefully to ensure proper installation of the washer and to prevent accidents when using it. WARNING Control board, heat sink, motor, inlet valve and pump are intentionally not grounded and may present a risk of electric shock only during servicing. Installation Unpacking your washer Unpack your washer and inspect it for shipping damage. Make sure you have received all the items shown below.
Overview of your washer Make sure all the parts are included in the product package. If you have a problem with the washer or the parts, contact a local Samsung customer center or the retailer. 01 Installation 02 03 04 08 09 05 10 MAX MAX 11 06 12 07 01 Drain hose 02 Hose guide 03 Lid 04 Built-in sink 05 Water Jet 06 Tub 07 Leveling feet 08 Water hose (Cold) 09 Water hose (Hot) 10 Control panel 11 Detergent drawer 12 Power cord English 17 WA8700M_WA54M8750A_DC68-03774B-00_EN.
Installation Parts supplied Installation Hose guide User manual Plastic zip hose tie Water intake cap Parts not supplied Water hose Tools needed for installation Wrench Philips screwdriver Adjustable Plier Measuring tape Level NOTE • • • • If you lose an accessory and want to purchase a replacement, contact the Samsung service center (1-800-SAMSUNG (1-800-726-7864)). The design of the parts and accessories may differ from the pictures above.
Basic location requirements Electrical • • CAUTION Never use an extension cord. WARNING An improperly connected equipmentgrounding conductor can increase the risk of electrical shock. Check with a qualified electrician or serviceman if you are not sure whether the appliance is properly grounded. Do not modify the plug provided with the appliance – if it does not fit the outlet, have a proper outlet installed by a qualified electrician.
Installation The water faucets must be within 4 feet (122 cm) to the back of your Washer to match the inlet hoses provided with your Washer. Installation NOTE Accessory inlet hoses are available in various lengths up to 10 feet (275 cm) for faucets that are further away from the back of your washer. To avoid the possibility of water damage: • Have water faucets easily accessible. • Turn off faucets when the washer is not in use.
Recessed area Side view - closet or confined area A A E Installation A B B A 1 in (2.5 cm) B 27.0 in (68.6 cm) A B C D A 21 in (53.3 cm) B 2 in (5.1 cm) C 29 7/16 in (74.4 cm) D 6 in (15.2 cm) E Gap between end of water valve and the wall • Case 1. Assemble supply hose after installing : Over 4 in (10 cm). • Case 2. Assemble supply hose before installing : Over 3 in (8 cm). English 21 WA8700M_WA54M8750A_DC68-03774B-00_EN.
Installation Installation Required dimensions for Installation B A C A A 27.0 in (68.6 cm) B 39.2 in (99.5 cm) C 43.6 in (110.7 cm) 61.0 in (155.0 cm) A C A B B C A A 29.3 in (74.4 cm) B 43.6 in (110.7 cm) A* 48.0 in2 (310.0 cm2) B* 24.0 in2 (155.0 cm2) C 3.0 in (7.6 cm) NOTE * Required spacing 22 English WA8700M_WA54M8750A_DC68-03774B-00_EN.
Important note to installer Please read the following instructions carefully before installing your washer. These instructions should be retained for future reference. We recommend you hire a professional to install this washer.
Installation STEP 2 Connecting the water supply hose CAUTION Installation Before installing the water supply hoses, make sure there are rubber gaskets (B) inside the couplings (A) at both ends of each new water hose. Installing the water supply hoses without rubber gaskets can cause water leakage. B A CAUTION When you initially install the washer, be sure to use new hoses. Failing to do so may result in a water leakage or overflow and may damage your property.
1. Connect the ends of the water supply hoses to the hot and cold faucets. 2. Tighten the fittings by hand until they are snug, and then tighten them an additional two-thirds of a turn with a plier. When you fasten the fittings, do not fasten them too tightly or apply tape or sealant to the faucets or water supply intakes. This can damage the fittings. NOTE After you have connected the water supply hoses to the faucets, ensure that they are connected correctly by pulling the water supply hoses downwards.
Installation 4. Connect the ends of the water supply hoses to the water supply intake connections at the back of the washer. CAUTION Installation The water supply hose connected to the hot faucet must be connected to the hot water supply intake and the water hose connected to the cold faucet must be connected to the cold water supply intake. 5. Tighten the fittings by hand until they are snug, and then tighten them an additional two-thirds of a turn with a plier.
STEP 3 Connecting the drain hose The end of the drain hose can be positioned in three ways: In a Wall standpipe or Floor standpipe A NOTE • C Make sure that the connection between the drain hose and the standpipe is not airtight. In a laundry tub The height of the tub must be no lower than 39 in (99 cm) and no higher than 96 in (245 cm) Assemble the supplied Hose guide at the end of the drain hose, and put the hanger on laundry tub. And fasten the drain hose to the leg of laundry tub.
Installation NOTE Installation * A Connect the hose guide (A) within 3-5 in (7.6-12.7 cm)* from the end of the drain hose. If the drain hose is extended beyond the end of the hose guide, mold or microorganisms could spread inside the washer. NOTE The drain hose can be installed to a 96 in (245 cm) maximum, but the draining capability can be reduced at this height. It can cause the washer to have an odor because of remaining water in the drain system.
3. If the washer is level, the pulsator (A) is positioned at the center of the water as shown in the figure. If not, level your washer by turning the front leveling feet clockwise or counterclockwise as necessary. Turn the front leveling feet clockwise (B) to lower the washer, and counterclockwise (C) to raise the washer. B C STEP 5 Powering your washer Plug the power cord into a 3-prong, well grounded 120 volt 60 Hz approved electrical outlet protected by a 15-amp fuse or comparable circuit breaker.
Installation STEP 6 Running a test cycle Installation Run a test cycle as follows to check if your washer is properly installed. 1. 2. 3. 4. 5. Load about 6 pounds of laundry into the tub. Press Power to turn on your washer. Select RINSE+SPIN by press the Cycle Selector. Press and hold Start/Pause to start the test cycle. The washer should not rock or vibrate excessively when water is supplied or when washing or spinning, and should drain well during the spin cycle.
Operating instructions WARNING To reduce the risk of fire, electric shock, or injury to persons when using your appliance, follow basic precautions, including the following: Loading your washer • • • • NOTE During the spin cycle, the washer may add additional water to redistribute the clothes and correct an imbalance inside the drum. • When washing heavily soiled loads, do not overload your washer to ensure good cleaning results.
Operating instructions To add a forgotten item: 1. Press Start/Pause to pause the washer. 2. Wait for the door to unlock automatically, and then open the door. 3. Add the item, close the door, and then press and hold Start/Pause. The cycle will resume. Operating instructions Getting started 1. Load your washer. 2. Add liquid (or powder) detergent and additives to the dispenser (see the "Detergent use" section on page 46). 3.
Washing a load of laundry WARNING To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance. Control panel 01 02 14 15 03 04 06 10 07 11 08 12 09 13 05 Press to select a desired cycle in the left-most panel. When a cycle is selected, the cycle indicator lights up. 02 Display Provides instructions and diagnostics while keeping you updated on the cycle status and time remaining. 03 Temp.
Washing a load of laundry Washing a load of laundry 05 Soil Level Press the button to select the soil level/washing time. • Extra Heavy - For heavily soiled loads. • Heavy - For heavily soiled loads. • Normal - For moderately soiled loads. This setting is best for most loads. • Light - For lightly soiled loads. • Extra Light - For lightly soiled loads. 06 Pre Soak It adds 18 minutes soaking time at the start of the wash cycle for better stain removal.
Cycle overview NOTE To minimize wrinkling of laundry, select PERM PRESS. Cycle Description For most fabrics including cottons, linens, and normally soiled garments. HEAVY DUTY For sturdy, colorfast fabrics and heavily soiled garments. We propose to use this function only when washing lot of heavily soiled garments. DELICATES For sheer fabrics, bras, lingerie, silks, and other handwash-only fabrics. For best results, use liquid detergent. DEEP WASH Use more water in washing and rinsing.
Washing a load of laundry Options Child Lock • Child Lock prevents children from playing with your washer. Activating the Child Lock function Press and hold Temp. and Spin simultaneously for approximately 3 seconds. • When you activate the Child Lock function, the Child Lock indicator blinks. Washing a load of laundry Using the Child Lock function If the lid is opened when the Child Lock function is on, “dC” is displayed and an alarm sounds.
CAUTION • • Once you have activated the Child Lock function, it continues working even if the power is turned off. Forcing the lid open can result in injury or damage to the product. NOTE To add laundry after you have activated the Child Lock function, you must first deactivate the Child Lock function. Sound Garment Plus You can add or take out laundry items even after the wash has started, as long as the Garment Plus indicator is on. Pressing Start/Pause unlocks the lid.
Washing a load of laundry 3. Press Start/Pause. The “Delay End” indicator will be lit, and the clock will begin counting down until it reaches the set time. 4. To cancel a Delay End function, press the Power button and then turn the washer on again. Washing a load of laundry Pre Soak Use this function when the laundry is heavily contaminated or stained. This function improves the wash performance by adding a Pre Soak cycle. • If you select this function, the total cycle time is increased by 18 minutes.
5. If the smart phone’s camera is focused on the display panel of the washer, the panel and error message is automatically recognized and the error type and countermeasures are displayed on the smart phone. 6. If the smartphone fails to recognize the error code more than twice, please enter the error code displayed on the display panel of the washer manually into the Smart Care app.
Washing a load of laundry Samsung Smart Home This product is a smart washer that supports the Samsung Smart Home service. The EZ setup (network setting) takes time depending on your network condition. For more information, visit www.samsung.com. Installation Visit the Google Play Store, Galaxy Apps, or Apple App Store and search for “Samsung Smart Home”. Download and install the Samsung Smart Home app provided by Samsung Electronics to your smart device.
Getting started With Samsung Smart Home, you can remotely control your washer from your smart device. For improved performance, the content and design of the app is subject to change without notice. 1. Launch the Samsung Smart Home App on your smartphone. 2. If ‘Washer’ is not listed, tap Add Device > Select other device > Washer on the app screen. 3. Press and hold Smart Control on your washer’s control panel for more than 5 seconds until the ‘AP’ message appears on the display. 4.
Washing a load of laundry Washing a load of laundry Washing clothes using the option button Your new washer makes washing clothes easy, using Samsung’s “Fuzzy Control” automatic control system. When you select a wash program, the machine will set the correct temperature, washing time, and washing speed. Pause Option 1. Press Power. 2. Open the lid. 3. Load the articles of clothing one at a time loosely into the drum, without overfilling it. 4.
ATC (Auto Temperature Control) ATC is the control function that the washer controls water temperature with temperature sensor (thermistor). NOTE Because there are numerous water temperatures depending on the customer’s environments (cold areas, warm areas, various water temperatures, settings of heater temperature, etc.), ATC function in our washer maintains the certain level of wash temperature to output the best washing performance at each cycle.
Washing a load of laundry The basics Prewash (Water Jet & Built-in sink) Water Jet and Built-in sink help you handwash before the washing machine starts operation. Water Jet is available only when the door is open with the water level set to less than High. For prewashing, use the Built-in sink that is designed to facilitate the hand-wash. Washing a load of laundry 1. With the door open, lower the Built-in sink . To open only the door, press and release the front middle of the door.
[Water Jet drains] • • Select a cycle and press Start/Pause. Then the washing machine drains the water to be used during the prewash. When the washing machine is turned off before starting the wash cycle, it drains the water to be used during the prewash. However, when it is turned off during the wash cycle, it does not drain the water.
Washing a load of laundry Washing a load of laundry Detergent use Your washer is designed to use high efficiency (HE) detergents. • For the best cleaning results, use a high efficiency detergent such as Tide HE, Wisk HE, Cheer HE or Gain HE*. High efficiency detergents contain suds suppressors that reduce or eliminate suds. When fewer suds are produced, the load tumbles more efficiently and cleaning is maximized. (* Brand names are trademarks of their respective manufacturers.
Features Automatic dispenser Your washer has separate compartments for dispensing detergent and color-safe bleach and fabric softener. Add all laundry additives to their respective compartments before starting your washer. The automatic dispenser must always be in place before you start your washer. DO NOT open the automatic dispenser when your washer is running. NOTE • • • To add detergent to the automatic dispenser: 1. Open the dispenser drawer. 2.
Washing a load of laundry Loading the Liquid (or Powder) detergent compartment A 1. Pour the recommended amount of laundry detergent directly into the detergent compartment before starting your washer. 2. If you are using color-safe bleach, add it with the detergent to the detergent compartment. NOTE When adding color-safe bleach with detergent, it is best if both laundry products are in the same form – liquid.
Loading the Bleach compartment CAUTION Use the liquid chlorine bleach only. B 1. Add chlorine bleach to the bleach compartment (B). DO NOT exceed the bleach compartment. NOTE Avoid splashing or over–filling the compartment. MAX MAX • Never pour undiluted liquid chlorine bleach directly onto the load or into the tub. It is a powerful chemical and can cause fabric damage, such as weakening of the fibers or color loss, if not used properly.
Washing a load of laundry Loading the fabric softener compartment C 1. Pour the recommended amount of liquid fabric softener into the softener compartment (C). For smaller loads, use less than one capful. 2. Dilute the fabric softener with water until it reaches MAX FILL in the compartment. 3. The dispenser automatically releases liquid fabric softener at the proper time during the rinse cycle. NOTE Washing a load of laundry • • • Use the softener compartment ONLY for liquid fabric softeners.
Maintaining your washer WARNING Control board, heat sink, motor, inlet valve and pump are intentionally not grounded and may present a risk of electric shock only during servicing. Cleaning the exterior 1. Turn off the water faucets after finishing the day’s washing. This will shut off the water supply to your washer and prevent the unlikely possibility of damage from escaping water. Leave the lid open to allow the inside of your washer to dry out. 2.
Maintaining your washer Preserving the top cover and the front frame Do not place any heavy or sharp objects or a detergent box on the washer. They can scratch or damage the top cover of the unit. NOTE Since the entire washer has a high-gloss finish, the surface can be scratched or damaged. Avoid scratching or damaging the surface when using the washer. Cleaning mesh filter Clean the mesh filter of the water hose once or twice a year. 1. Turn off the washer, and then unplug the power cord. 2.
2. Push the ends of each side of the case at the same time. When you feel the ends push, pull out the dispenser drawer. 3. Remove the inserts from the 3 compartments. Rinse the inserts and the drawer with warm water to remove traces of accumulated laundry products. A B 5. Return the inserts to the proper compartments and replace the drawer by placing the dispenser drawer rail (B) on top of the compartment rail (A) (Tilt the dispenser drawer downward and insert it).
Maintaining your washer Self Clean Self Clean is a self-cleaning cycle that removes mold that may occur inside the washer. 1. Press Power. 2. Select Self Clean. Once Self Clean is selected, the only function that can be set is Delay End. 3. Press and hold Start/Pause. Self. CAUTION • • Using Self Clean, you can clean the drum without using a cleansing agent. Never use Self Clean when laundry is in the washer. This may cause damage to the laundry or a problem with the washer.
Troubleshooting Checkpoints If you encounter a problem with the washer, first check the table below and try the suggestions. Problem Does not turn on. Action • • • Make sure you use rated power for the product. Make sure the power cord is completely plugged in. Check the fuse or reset the circuit breaker. • • • Make sure the door is closed. Make sure the water taps are open. Make sure to press or tap Start/Pause to start the washing machine. Make sure Child Lock is not activated.
Troubleshooting Problem Action • • Vibrates excessively or makes noise. • • • • • • • • • Stops. • Troubleshooting • • Make sure the washing machine is set on a level floor. If the floor is not level, use the levelling feet to adjust the washing machine. Make sure the washing machine is not contacting any other object. Make sure the laundry load is balanced. Make sure the laundry is spread evenly in the washing machine. Spread out the laundry evenly and start again.
Problem Action • • • • Fills with the wrong temperature water. • • • Door (Lid) locked or will not open. • • • • • • • • • • Load is wet at the end of the cycle. • • While the washing machine is operating, press or tap Start/ Pause to stop the washing machine. It may take a few moments for the door lock mechanism to disengage. Check the fuse or reset the circuit breaker. Make sure the electrical voltage is normal. Make sure the washing machine is plugged in.
Troubleshooting Problem Action • • • Leaks water. • • • • • Excessive suds. • • • • The spin basket or drain/supply hose is frozen. • • • Troubleshooting • Water drains out immediately. • • Stains on clothes. • Make sure all hose connections are tight. Make sure the water supply hose's rubber packing is in the correct position. Screw tightly again. Make sure the end of the drain hose is correctly inserted and secured to the drain system. Avoid overloading.
Problem Action • • • Has odours. Excessive suds collect in recesses and can cause foul odours. Run cleansing cycles to sanitize periodically. Dry the washing machine interior after a cycle has finished. If a problem persists, contact a local Samsung service center. Information codes The washer may display information codes to help you understand what is occurring with your washer better. No 1 Code 1C Meaning The WaterLevel sensor is not working properly. • Check WaterLevel Sensor wire harness.
Troubleshooting No Code Meaning 4C2 • Make sure the cold water supply hose is firmly connected to the cold water tap. If it is connected to the hot water tap, the laundry may be deformed with some cycles. 5C Water is not draining. • Make sure the drain hose is not frozen or clogged. • Make sure the drain hose is positioned correctly, depending on the connection type. • Clean the debris filter as it may be clogged. • Make sure the drain hose is straightened all the way to the drain system.
No 11 Code LC Meaning Check the drain hose. • Make sure the end of the drain hose is placed on the floor. • Make sure the drain hose is not clogged. • If the information code remains, contact a customer service centre. NOTE When the washer displays “LC”, the washer do draining for 3 minutes. During this time, the Power button is inoperative. 12 OC Water is overflowed. • Restart after spinning. • If the information code remains on the display, contact a local Samsung service centre.
Specifications Fabric care chart The following symbols provide garment care direction. The clothing care labels include symbols for drying, bleaching, drying and ironing, or dry cleaning when necessary. The use of symbols ensures consistency among garment manufacturers of domestic and imported items. Follow care label directions to optimize garment life and reduce laundering problems.
Heat setting Dry-clean High Dry-clean Medium Do not dry-clean Low Line dry / Hang to dry Any heat Drip dry No heat / Air Dry flat Iron dry or steam temperatures High Medium Low Warning symbols for laundering Do not wash Do not wring Do not bleach Do not tumble dry No steam (added to iron) Specification Do not iron English 63 WA8700M_WA54M8750A_DC68-03774B-00_EN.
Specification Helping the environment • Your washer is manufactured from recyclable materials. If you decide to dispose of it, please observe local waste disposal regulations. Cut off the power cord so that the appliance cannot be connected to a power source. Remove the lid so that animals and small children cannot get trapped inside the appliance. • • • Do not exceed the detergent quantities recommended in the detergent manufacturers’ instructions.
Specification sheet C A B D Type Top loading washer Model name WA54M8750A* Dimensions (inches (cm)) A. Height 43.6 (110.7) B. Width 27.0 (68.6) C. Height with lid open 61.0 (155.0) D. Depth 29.3 (74.4) Water pressure (psi (kPa)) 20 - 116 (137 - 800) Spin revolution 800 rpm NET weight (kg (lb)) 62 (137.0) Heater rating Washing 120 V 700 W Spin 120 V 400 W Drain 120 V 80 W Specification English 65 WA8700M_WA54M8750A_DC68-03774B-00_EN.
Specification Cycle chart Use this chart to set the best cycle and options for you laundry. NOTE Setting Temp. : factory setting : can be selected Cycle EH: Extra Hot H: Hot W: Warm EW: Eco warm C: Cool CD: Cold Soil Level EH: Extra High H: High M: Medium L: Low NS: No Spin EH: Extra Heavy H: Heavy N: Normal L: Light EL: Extra Light Spin Soil Level Temp.
Cycle Options Pre Soak Extra Rinse Eco Plus Fabric Softener NORMAL HEAVY DUTY SUPER SPEED - - - - BRILLIANT WHITES BEDDING/ WATERPROOF - PERM PRESS QUICK WASH - - - RINSE+SPIN - - SPIN - - - - SELF CLEAN - - - - DEEP WASH DELICATES STEAM SANITIZE Specification English 67 WA8700M_WA54M8750A_DC68-03774B-00_EN.
Warranty (U.S.A) SAMSUNG WASHER LIMITED WARRANTY TO ORIGINAL PURCHASER This SAMSUNG brand product, as supplied and distributed by SAMSUNG ELECTRONICS AMERICA, INC. (SAMSUNG) and delivered new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for a limited warranty period of: One (1) year part and labor, Three (3) years stainless tub part (Part Only), Ten (10) years washing DD motor part (Part Only).
This limited warranty does not cover problems resulting from incorrect electric current, voltage or supply, light bulbs, house fuses, house wiring, cost of a service call for instructions, or fixing installation errors. SAMSUNG does not warrant uninterrupted or error-free operation of the product.
Warranty (U.S.A) To obtain warranty service, please contact SAMSUNG at: Samsung Electronics America, Inc. 85 Challenger Road Ridgefield Park, NJ 07660 1-800-SAMSUNG (726-7864) www.samsung.com/us/support Visits by a Service Engineer to explain functions, maintenance or installation is not covered by warranty. Please contact your Samsung call agent for help with any of these issues. 70 English WA8700M_WA54M8750A_DC68-03774B-00_EN.
Warranty (CANADA) SAMSUNG WASHER LIMITED WARRANTY TO ORIGINAL PURCHASER This SAMSUNG brand product, as supplied and distributed by SAMSUNG ELECTRONICS CANADA, INC. (SAMSUNG) and delivered new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for a limited warranty period of: One (1) year part and labor, Ten (10) years washing DD motor (Part only).
Warranty (CANADA) This limited warranty does not cover problems resulting from incorrect electric current, voltage or supply, light bulbs, house fuses, house wiring, cost of a service call for instructions, or fixing installation errors. SAMSUNG does not warrant uninterrupted or error-free operation of the product.
To obtain warranty service, please contact SAMSUNG at: Samsung Electronics Canada Inc. 2050 Derry Road West Mississauga, Ontario L5N 0B9 Canada 1-800-SAMSUNG (726-7864) www.samsung.com/ca/support (English) www.samsung.com/ca_fr/support (French) Visits by a Service Engineer to explain functions, maintenance or installation is not covered by warranty. Please contact your Samsung call agent for help with any of these issues. English 73 WA8700M_WA54M8750A_DC68-03774B-00_EN.
Memo WA8700M_WA54M8750A_DC68-03774B-00_EN.
Memo WA8700M_WA54M8750A_DC68-03774B-00_EN.
Scan this with your smartphone QUESTIONS OR COMMENTS? COUNTRY CALL OR VISIT US ONLINE AT U.S.A 1-800-SAMSUNG (726-7864) 1-844-SAM-PAYS (726-7297) www.samsung.com/us/support CANADA 1-800-SAMSUNG(726-7864) www.samsung.com/ca/support (English) www.samsung.com/ca_fr/support (French) DC68-03774B-00 WA8700M_WA54M8750A_DC68-03774B-00_EN.