WD0704RE(A/C/D/F/G/H/Q/R/S/T/V/W/Z) WD0702RE(A/C/D/F/G/H/Q/R/S/T/V/W/Z) WD0654RE(A/C/D/F/G/H/Q/R/S/T/V/W/Z) WD0652RE(A/C/D/F/G/H/Q/R/S/T/V/W/Z) WD0604RE(A/C/D/F/G/H/Q/R/S/T/V/W/Z) WD0602RE(A/C/D/F/G/H/Q/R/S/T/V/W/Z) Washing Machine user manual This manual is made with 100% recycled paper. imagine the possibilities Thank you for purchasing this Samsung product. To receive a more complete service, please register your product at www.samsung.com/register WD0654REC-02829G-01_EN(XTL).
features of your new samsung washing machine Your new washing machine will change the way you feel about doing laundry. From its super-size capacity to its energy efficiency, the Samsung washing machine has all the features to turn a mundane chore into a pleasure. • Washing to drying with one button Enjoy convenient non stop washing and drying managing. 3 different special drying programs can be selected to perform the whole wash cycle including the drying cycle using one button.
• Air Wash The Air Wash system deodorizes unpleasant smells and sterilizes the laundry that cannot be eliminated through a conventional washing system, a benefit of its unique air-washing mechanism. • Air-washable : Woolen coats, cotton/down jumpers, sweaters, suits, pillows, cushions, needlework dolls • Not applicable : leather, silk, velvet, electric blankets, other stained laundry • Digital Graphic Display The Digital Graphic Display control panel is clear and easy to use for minimum fuss and hassle.
safety information Congratulations on your new Samsung ActivFresh™ washer. This manual contains important information on the installation, use and care of your appliance. Please take time to read this manual to take full advantage of your washer’s many benefits and features.
Do not let children (or pets) play on or in your washing machine. The washing machine door does not open easily from the inside, and children may be seriously injured if trapped inside. WARNING This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
safety information WARNING SEVERE WARNING SIGNS FOR INSTALLATION The installation of this appliance must be performed by a qualified technician or service company. - Failure to do so may result in electric shock, fire, an explosion, problems with the product, or injury. The appliance is heavy, take care upon lifting it Plug the power cord into an AC 220V/50Hz/15A wall socket or higher and use the socket for this appliance only. In addition, do not use an extension cord.
Do not hook the power cord over a metal object, place a heavy object on the power cord, insert the power cord between objects, or push the power cord into the space behind the appliance. - This may result in electric shock or fire. Do not pull the power cord, when unplugging the power plug. - Unplug the power plug by holding the plug. - Failure to do so may result in electric shock or fire. Do not lay the power cord and tubes where you may fall over them.
safety information Do not wash items contaminated with gasoline, kerosene, benzene, paint thinner, alcohol or other flammable or explosive substances. - This may result in electric shock, fire or an explosion. Do not open the washer door by force while it is operating (high-temperature washing/ drying/spinning). - Water flowing out of the washer may result in burns or cause the floor to be slippery. This may result in injury. - Opening the door by force may result in damage to the product or injury.
CAUTION CAUTION SIGNS FOR USING When the washer is contaminated by a foreign substance such as detergent, dirt, food waste, etc., unplug the power plug and clean the washer using a damp and soft cloth. - Failure to do so may result in discoloration, deformation, damage or rust. The front glass may be broken by a strong impact. Take care when using the washer. - When the glass is broken, it may result in injury. After a water supply failure or when reconnecting the water supply hose, open the faucet slowly.
safety information Do not stand on top of the appliance or place objects (such as laundry, lighted candles, lighted cigarettes, dishes, chemicals, metal objects, etc.) on the appliance. - This may result in electric shock, fire, problems with the product, or injury. Do not spray volatile material such as insecticide onto the surface of the appliance. - As well as being harmful to humans, it may also result in electric shock, fire or problems with the product.
Do not use natural hand-washing soap for the washer. - If it hardens and accumulates inside the washer, it may result in problems with the product, discoloration, rust or bad odors. Do not wash large laundry items such as bedding in the washing net. - Place socks and brassieres into the washing net and wash them with the other laundry. - Failure to do so may result in injury due to abnormal vibrations. Do not use hardened detergent. - If it accumulates inside the washer, it may result in water leakage.
contents setting up your washing machine 13 washing a load of laundry 21 13 Checking the parts 14 Meeting installation requirements 14 Electrical supply and grounding 14 Water Supply 15 Drain 15 Flooring 15 Surrounding temperature 15 Alcove or closet installation 15 Installing your washing machine 21 Washing for the first time 21 Basic instructions 22 Using the control panel 24 Child lock 24 Sound off 25 Delay end 25 Air Wash 26 Using dry course 27 Auto Drying 27 Washing clothes using the cycle s
setting up your washing machine Checking the parts Carefully unpack your washing machine, and make sure you’ve received all of the parts shown below. If your washing machine was damaged during shipping, or if you do not have all of the parts, contact Samsung Customer Service or your Samsung dealer. Release lever 01 setting up Be sure to have your installer follow these instructions closely so that your new washing machine works properly and so that you’re not at risk of injury when doing laundry.
setting up your washing machine Meeting installation requirements Electrical supply and grounding To prevent unnecessary risk of fire, electrical shock, or personal injury, all wiring and grounding must be done in accordance with the National Electrical Code ANSI/FNPA, No. 70 Latest Revision and local codes and ordinances. It is the personal responsibility of the appliance owner to provide adequate electrical service for this appliance. WARNING Never use an extension cord.
Drain Samsung recommends a standpipe height of 18 in (46 cm). The drain hose must be routed through the drain hose clip to the standpipe. The standpipe must be large enough to accept the outside diameter of the drain hose. The drain hose is attached at the factory. For best performance, your washing machine must be installed on a solidly constructed floor. Wood floors may need to be reinforced to minimize vibration and/or unbalanced loads.
setting up your washing machine STEP 2 Removing the shipping bolts Before installing the washing machine, you must remove all shipping bolts from the back of the unit. 1. Loosen all the bolts with the supplied wrench. 2. Hold the bolt with the spanner and pull it through the wide section of the hole. Repeat for each bolt. 3. Fill the holes with the supplied plastic covers. 4. Store the shipping bolts away safely in case you have to move the washing machine in the future.
STEP 3 Adjusting the levelling feet When installing your washing machine, ensure that the power plug, the water supply and the drain are easily accessible. 01 setting up 1. Slide the washing machine into position. 2. Level your washing machine by turning the leveling feet in and out as necessary by hand. 3. When your washing machine is level, tighten the nuts using the wrench supplied with your washing machine. STEP 4 Connecting the water and drain Connecting the water supply hose 1.
setting up your washing machine Connecting the water supply hose (selected models) 1. Remove the adaptor from the water supply hose. Adaptor Water supply hose 2. First, using a ‘+’ type screwdriver, loosen the four screws on the adaptor. Next, take the adaptor and turn part (2) following the arrow until there is a 5 mm gap. 1 5 mm 2 3. Connect the adaptor to the water tap by tightening the screws firmly while lifting the adaptor upwards. Turn part (2) following the arrow and connect (1) and (2).
6. Turn on the water supply and ensure that no water leaks from the water valve, tap or adaptor. If there is a water leaks, repeat the previous steps. • ✗ ✗ 01 setting up WARNING Do not use your washing machine if there is a water leak. This may cause electric shock or injury. If the water tap has a screw type tap, connect the water supply hose to the tap as shown. Use the most conventional type of tap for the water supply.
setting up your washing machine Connecting the drain hose The end of the drain hose can be positioned in three ways: 1. Over the edge of a wash basin: The drain hose must be placed at a height of between 60 and 90 cm. To keep the drain hose spout bent, use the supplied plastic hose guide. Secure the guide to the wall with a hook or to the tap with a piece of string to prevent the drain hose from moving. 60 ~ 90 cm Drain hose Hose guide 2.
washing a load of laundry With your new Samsung washing machine, the hardest part of doing laundry will be deciding which load to wash first. Washing for the first time 1. Press the Power button. 2. Add a little detergent to the detergent compartment the detergent drawer. 3. Turn on the water supply to the washing machine. 4. Press the Start/Pause button. in This will remove any water that might be left over in the machine from the manufacturer’s test run.
washing a load of laundry Using the control panel 1 1 2 2 3 4 1 5 6 7 8 9 10 11 12 DIGITAL GRAPHIC DISPLAY Displays the remaining wash cycle time, all cycle information, and error messages. CYCLE SELECTOR Select the tumble pattern and spin speed for the cycle. For detailed information, refer to “Washing clothes using the cycle selector”. (see page 27) Cotton - For averagely or lightly soiled cottons, bed linen, table linen, underwear, towels, shirts, etc.
3 PRE WASH SELECTION BUTTON Press this button to select pre wash. 4 DELAY END SELECTION BUTTON Press this button repeatedly to cycle through the available Delay End options (from 3 hours to 19 hours in one hour increments). The hour displayed indicates the time when the wash cycle will be finished. 5 TEMP. SELECTION BUTTON Press this button repeatedly to cycle through the available water temperature options: (Cold Water , 30 ˚C, 40 ˚C , 60 ˚C and 95 ˚C).
washing a load of laundry 11 START/PAUSE SELECTION BUTTON Press to pause and restart a cycle. 12 POWER BUTTON Press it once to turn your washing machine on, press it again to turn your washing machine off. If the washing machine is left on for more than 10 minutes without any buttons being touched, the power automatically turns off. Child lock The Child Lock function allows you to lock the buttons so that the wash cycle you’ve chosen can’t be changed.
Drain Only Fuction Air Wash Air Wash can refresh laundry without using water owing to its powerful airing system. Clothing that can be refreshed includes woolen coats, cotton or jumpers, sweaters and suits. (Two items or less (less than 1 kg)) 1. Open the door, place the laundry into the washing machine and close the door. 2. Press the Power button. 3. Select Air Wash by turning the Cycle Selector.
washing a load of laundry Using dry course Refer to the label of drying capacity and be sure to put in the clothes to the lower level than the marked line for the dried clothe of 3.5kg (or 3.0kg(selected models)). 1. Open the door, put in the clothes and close the door again. 2. Press the Power button and then press the Drying button. : The standard course will be selected automatically.
Auto Drying Samsung’s brand-new technology, outstanding Auto Dry can apperceive the condition of your drying clothes, and decide automatically when to stop, bringing convienence to your life. all use Auto Dry technology, and will • Just in Time: At the very time when your clothes are dry, the machine apperceives it and stops drying, preventing damage to clothes caused by over-drying. The drying time will be adjusted accordingly during the course.
washing a load of laundry Washing clothes manually You can wash clothes manually without using the Cycle Selector. 1. Turn the water supply on. 2. Press the Power button on the washing machine. 3. Open the door. 4. Load the articles loosely into the drum one at a time, without overfilling it. 5. Close the door. 6. Add detergent and, if necessary, softener or prewash detergent, into the appropriate compartments. 7. Press the Temp. button to select the temperature. (Cold water, 30 ˚C, 40 ˚C, 60 ˚C, 95 ˚C) 8.
Fabric Type Model Load Capacity WD0654/WD0652 WD0604/WD0602 Cotton - average/lightly soiled - heavily soiled 7.0 kg 6.5 kg 6.0 kg Synthetics 3.0 kg 3.0 kg 3.0 kg Sports Wear 2.5 kg 2.5 kg 2.5 kg Delicates 2.5 kg 2.5 kg 2.5 kg Wool 2.0 kg 2.0 kg 2.0 kg 02 Washing a load of laundry WD0704/WD0702 • When the laundry is unbalanced (“UE” lights up on the display), redistribute the load. If the laundry is unbalanced, the spin efficiency may be degraded.
washing a load of laundry Detergent drawer Your washing machine has separate compartments for dispensing detergent and fabric softener. Add all laundry additives to the correct compartment before starting your washing machine. Do NOT open the detergent drawer when your washing machine is running. 1. Pull out the detergent drawer on the left side of the control panel. 2. Add the recommended amount of laundry detergent before starting directly into the detergent compartment your washing machine. 3.
cleaning and maintaining your washing machine Keeping your washing machine clean improves its performance, wards off unnecessary repairs, and lengthens its life. 1. Unplug the washing machine from the power supply. 2. Open the filter cover using a coin or a key. Filter cover 03 cleaning and maintaining Draining the washing machine in an emergency 3. Unscrew the emergency drain cap by turning it to the left. Emergency drain cap 4.
cleaning and maintaining your washing machine Cleaning the detergent drawer and drawer recess 1. Press the release lever on the inside of the detergent drawer and pull the drawer out. 2. Remove the liquid detergent divider from the detergent drawer Release lever Liquid detergent divider 3. Wash all parts under running water. 4. Clean the drawer recess with an old toothbrush. 5. Replace the liquid detergent divider by pushing it firmly into the drawer. 6. Push the drawer back into place. 7.
cleaning and maintaining your washing machine Cleaning the debris filter CAUTION Before cleaning the debris filter, make sure to unplug the power cord. 1. Remove the remaining water first (refer to “Draining the washing machine in an emergency” on page 29.) If you separate the filter without draining the remaining water, the remaining water may trickle out. 2. Open the filter cover by using a key or coin. 3. Unscrew the emergency drain cap by turning it to the left and drain off all the water. 4.
cleaning and maintaining your washing machine Cleaning the water hose mesh filter You should clean the water hose mesh filter at least once a year, or when the error message of “4E” is displayed: 1. Turn off the water supply to the washing machine. 2. Unscrew the hose from the back of the washing machine. To prevent water from gushing out due to the air pressure in the hose, cover the hose with a cloth. 3.
troubleshooting and information codes Check these points if your washing machine... SOLUTION Will not start • • • • Make sure your washing machine is plugged in. Make sure the door is firmly closed. Make sure the water source tap(s) are turned on. Make sure to press the Start/Pause button. Has no water or not enough water • • • • Turn the water tap on fully. Make sure the water source hose is not frozen. Straighten the water intake hoses. Clean the filter on the water intake hose.
troubleshooting and information codes Information codes When your washing machine malfunctions, you may see an information code on the display. If that happens, check this table and try the suggested solution before calling Customer Service. CODE SYMBOL SOLUTION dE • Close the door. 4E • • Make sure the source water tap is turned on. Check the water pressure. 5E • • Clean the debris filter. Make sure the drainage hose is installed correctly. • The laundry load is unbalanced.
cycle chart Cycle chart ( user option) Max load(kg) PROGRAM DETERGENT Pre Wash Wash Max Temp (˚C) Softener Cotton 7.0 6.5 6.0 yes 95 Synthetics 3.0 3.0 3.0 yes 60 Denim 3.0 3.0 3.0 yes 60 Sports Wear 2.5 2.5 2.5 yes 60 Delicates 2.5 2.5 2.5 - yes 40 Wool 2.0 2.0 2.0 - yes 40 40 Handwash 2.0 2.0 2.0 - yes Deodorization 1.0 1.0 1.0 - - - - Sterilization 1.0 1.0 1.0 - - - - Drying 3.5 3.0 3.
appendix Fabric care chart The following symbols provide garment care directions. The care labels include four symbols in this order: washing, bleaching, drying and ironing, and dry cleaning when necessary. The use of symbols ensures consistency among garment manufacturers of domestic and imported items. Follow the care label directions to maximize garment life and reduce laundering problems.
Specifications TYPE FRONT LOADING WASHING MACHINE WD0704/WD0702 WD0654/WD0652 W598mm X D610mm X H846mm 50 kPa ~ 800 kPa WATER PRESSURE WATER VOLUME NET WEIGHT WASH AND SPIN CAPACITY WD0704/WD0702 WD0654/WD0652 WD0604/WD0602 75 ℓ 75 ℓ 72 ℓ WD0704/WD0702 WD0654/WD0652 WD0604/WD0602 63 kg 63 kg 63 kg 7.0 kg (DRY LAUNDRY) 6.5 kg (DRY LAUNDRY) 6.0 kg (DRY LAUNDRY) 3.5 kg 3.0 kg 3.
QUESTIONS OR COMMENTS? Country CALL OR VISIT US ONLINE AT INDIA 1800 1100 11 3030 8282 1800 3000 8282 1800 266 8282 www.samsung.com Code No. DC68-02829G-01_EN WD0654REC-02829G-01_EN(XTL).