User manual

setting up your new washing machine _17
01 setting up
STEP 3

When installing your washing machine, ensure that the power plug, the water supply and
the drain are easily accessible.
1. Slide the washing machine into position.
2. Levelyourwashing
machine by turning the
leveling feet in and out as
necessary by hand.
3. When your washing machine is level, tighten the nuts using
the wrench supplied with your washing machine.
STEP 4

Connecting the water supply hose
1. TaketheL-shapedarmttingforthecoldwater
supply hose and connect it to the cold water
supply intake on the back of the machine.
Tighten by hand.
The water supply hose must be connected
to the washing machine at one end and to
thewatertapattheother.Donotstretchthe
watersupplyhose.Ifthehoseistooshort,
replace the hose with a longer, high pressure
hose.
2. Connecttheotherendofthecoldwatersupply
hosetoyoursink’scoldwatertapandtighten
itbyhand.Ifnecessary,youcanrepositionthe
water supply hose at the washing machine end
bylooseningthetting,rotatingthehose,and
retighteningthetting.

1. TaketheredL-shapedarmttingforthehotwatersupplyhoseandconnectittothehot
water supply intake on the back of the machine. Tighten by hand.
2. Connecttheotherendofthehotwatersupplyhosetoyoursink’shotwatertapandtighten
it by hand.
3. UseaY-pieceifyouonlywanttousecoldwater.
WD0654REC-02829G-01_EN(XTL).indd 17 2012-7-30 15:42:48