User manual

18_ setting up your new washing machine
Connecting the water supply hose (selected models)
1. Remove the adaptor from the water supply hose.
2. First,usinga‘+’typescrewdriver,loosenthefourscrews
ontheadaptor.Next,taketheadaptorandturnpart(2)
following the arrow until there is a 5 mm gap.
3. Connecttheadaptortothewatertapbytighteningthe
screwsrmlywhileliftingtheadaptorupwards.
Turnpart(2)followingthearrowandconnect(1)and(2).
4. Connectthewatersupplyhosetotheadaptor.
Whenyoureleasepart(3),thehoseautomatically
connectstotheadaptormakinga‘click’sound.
After you have connected the water supply
hose to the adaptor, ensure that it is connected
correctly by pulling the water supply hose
downwards.
5. Connecttheotherendofthewatersupplyhosetotheinlet
water valve at the rear of the washing machine. Screw the
hose clockwise all the way in.
setting up your washing
machine



1
2

3
1
2

WD0654REC-02829G-01_EN(XTL).indd 18 2012-7-30 15:42:50