User manual

setting up your new washing machine _19
01 setting up
6. Turn on the water supply and ensure that no water leaks
fromthewatervalve,taporadaptor.Ifthereisawater
leaks, repeat the previous steps.
Donotuseyourwashingmachineifthereisawaterleak.
This may cause electric shock or injury.
• Ifthewatertaphasascrewtypetap,connectthewater
supply hose to the tap as shown.
Usethemostconventionaltypeoftapforthewatersupply.Incasethetapissquareortoo
big, remove the spacing ring before inserting the tap into the adaptor.
✗
✗

WD0654REC-02829G-01_EN(XTL).indd 19 2012-7-30 15:42:51