User manual

20_ setting up your new washing machine

Connecting the drain hose

Theendofthedrainhosecanbepositionedinthreeways:

1. Over the edge of a wash basin:Thedrainhosemustbeplacedataheightofbetween60

and90cm.Tokeepthedrainhosespoutbent,usethesuppliedplastichoseguide.Secure

the guide to the wall with a hook or to the tap with a piece of string to prevent the drain hose

from moving.

2. ln a sink drain pipe branch: The drain pipe branch must be above the sink siphon so that

theendofthehoseisatleast60cmabovetheground.

3. ln a drain pipe:Werecommendusinga65cmhighverticalpipe;itmustbenoshorterthan

60cmandnolongerthan90cm.



• minimumdiameter5cm.

• minimumcarry-awaycapacity60literperminute.

STEP 5



Plugthepowercordintoawallsockets,a230volt50Hzapprovedelectricaloutletprotectedby

a15-ampfuseorcomparablecircuitbreaker.(Formoreinformationonelectricalandgrounding

requirements,seepage14.)

setting up your washing

machine





60~90cm

WD0654REC-02829G-01_EN(XTL).indd 20 2012-7-30 15:42:53