WD0804W8(E/N/S/V/W) WD0802W8(E/N/S/V/W) WD0804Y8(E/N/S/V/W) WD0802Y8(E/N/S/V/W) Washing Machine user manual This manual is made with 100% recycled paper. imagine the possibilities Thank you for purchasing this Samsung product. To receive a more complete service, please register your product at www.samsung.com/register WD0754W8E-02927D_EN(XSA).
features of your new samsung washing machine Your new washing machine will change the way you feel about doing laundry. From its specialised Eco Bubble function to its energy efficiency, your new Samsung washing machine has all the benefits to make washing laundry as easy and pleasant as possible. • Eco Bubble Wash Samsung’s effective Eco Bubble delivers improved cleanliness with advanced fabric care. Eco Bubble allows detergent to distribute evenly and penetrate fabrics faster and deeper.
• Wool Certified The machine has been tested and passed the required Woolmark Company specification for machine washable wool products. This mark is the upgraded certification better than the existing Woolmark, which guarantees not only washing performance but also fabric care for wool products. Fabrics should be washed according to the instructions on the garment label as specified by Woolmark and Samsung.
safety information Congratulations on your new Samsung washer. This manual contains important information on the installation, use and care of your appliance. Please take time to read this manual to take full advantage of your washer’s many benefits and features.
Do not let children (or pets) play on or in your washing machine. The washing machine door does not open easily from the inside, and children may be seriously injured if trapped inside. WARNING This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
safety information WARNING SEVERE WARNING SIGNS FOR INSTALLATION The installation of this appliance must be performed by a qualified technician or service company. - Failure to do so may result in electric shock, fire, an explosion, problems with the product, or injury. The appliance is heavy, take care upon lifting it Plug the power cord into an AC 220-240V / 50Hz wall socket or higher and use the socket for this appliance only. In addition, do not use an extension cord.
Do not hook the power cord over a metal object, place a heavy object on the power cord, insert the power cord between objects, or push the power cord into the space behind the appliance. - This may result in electric shock or fire. Do not pull the power cord, when unplugging the power plug. - Unplug the power plug by holding the plug. - Failure to do so may result in electric shock or fire. Do not lay the power cord and tubes where you may fall over them.
safety information Do not wash items contaminated with gasoline, kerosene, benzene, paint thinner, alcohol or other flammable or explosive substances. - This may result in electric shock, fire or an explosion. Do not open the washer door by force while it is operating (high-temperature washing/ drying/spinning). - Water flowing out of the washer may result in burns or cause the floor to be slippery. This may result in injury. - Opening the door by force may result in damage to the product or injury.
CAUTION CAUTION SIGNS FOR USING When the washer is contaminated by a foreign substance such as detergent, dirt, food waste, etc., unplug the power plug and clean the washer using a damp and soft cloth. - Failure to do so may result in discolouration, deformation, damage or rust. The front glass may be broken by a strong impact. Take care when using the washer. - When the glass is broken, it may result in injury.
safety information Do not stand on top of the appliance or place objects (such as laundry, lighted candles, lighted cigarettes, dishes, chemicals, metal objects, etc.) on the appliance. - This may result in electric shock, fire, problems with the product, or injury. Do not spray volatile material such as insecticide onto the surface of the appliance. - As well as being harmful to humans, it may also result in electric shock, fire or problems with the product.
Do not use natural hand-washing soap for the washer. - If it hardens and accumulates inside the washer, it may result in problems with the product, discolouration, rust or bad odors. Do not wash large laundry items such as bedding in the washing net. - Place socks and brassieres into the washing net and wash them with the other laundry. - Failure to do so may result in injury due to abnormal vibrations. Do not use hardened detergent. - If it accumulates inside the washer, it may result in water leakage.
contents SETTING UP YOUR WASHING MACHINE 13 WASHING A LOAD OF LAUNDRY 21 CLEANING AND MAINTAINING YOUR WASHING MACHINE 34 TROUBLESHOOTING AND INFORMATION CODES 39 41 42 CYCLE CHART APPENDIX 12_ contents WD0754W8E-02927D_EN(XSA).
setting up your washing machine CHECKING THE PARTS Carefully unpack your washing machine, and make sure you’ve received all of the parts shown below. If your washing machine was damaged during shipping, or if you do not have all of the parts, contact Samsung Customer Service or your Samsung dealer. 01 SETTING UP Be sure to have your installer follow these instructions closely so that your new washing machine works properly and so that you’re not at risk of injury when doing laundry.
setting up your washing machine MEETING INSTALLATION REQUIREMENTS Electrical supply and grounding WARNING Never use an extension cord. Use only the power cord that comes with your washing machine. When preparing for installation, ensure that your power supply offers: • AC 230V / 50Hz fuse or circuit breaker • Individual branch circuit serving only your washing machine Your washing machine must be grounded.
Drain Flooring For best performance, your washing machine must be installed on a solidly constructed floor. Wood floors may need to be reinforced to minimize vibration and/or unbalanced loads. Carpeting and soft tile surfaces are contributing factors to vibrations and the tendency for your washing machine to move slightly during the spin cycle. 01 SETTING UP Samsung recommends a standpipe height of 65cm. The drain hose must be routed through the drain hose clip to the standpipe.
setting up your washing machine STEP 2 Removing the shipping bolts Before installing the washing machine, you must remove all shipping bolts from the back of the unit. 1. Loosen all the bolts with the supplied wrench. Option 2. Hold the bolt with the spanner and pull it through the wide section of the hole. Repeat for each bolt. 3. Fill the holes with the supplied plastic covers. Option Option 4. Store the shipping bolts away safely in case you have to move the washing machine in the future.
STEP 3 Adjusting the Levelling feet 1. Slide the washing machine into position. 2. Level your washing machine by turning the levelling feet in and out as necessary by hand. 01 SETTING UP When installing your washing machine, ensure that the power plug, the water supply and the drain are easily accessible. 3. When your washing machine is level, tighten the nuts using the wrench supplied with your washing machine. STEP 4 Connecting the water and drain Connecting the water supply hose 1.
setting up your washing machine Connecting the water supply hose 1. Remove the adaptor from the water supply hose. Adaptor Water supply hose 2. First, using a ‘+’ type screwdriver, loosen the four screws on the adaptor. Next, take the adaptor and turn part (2) following the arrow until there is a 5 mm gap. 1 5 mm 2 3. Connect the adaptor to the water tap by tightening the screws firmly while lifting the adaptor upwards. Turn part (2) following the arrow and connect (1) and (2). Water tap 1 2 4.
6. Turn on the water supply and ensure that no water leaks from the water valve, tap or adaptor. If there is a water leaks, repeat the previous steps. WARNING ✗ ✗ 01 SETTING UP • Do not use your washing machine if there is a water leak. This may cause electric shock or injury. If the water tap has a screw type tap, connect the water supply hose to the tap as shown. Use the most conventional type of tap for the water supply.
setting up your washing machine Connecting the drain hose The end of the drain hose can be positioned in three ways: 1. Over the edge of a wash basin: The drain hose must be placed at a height of between 60 and 90 cm. To keep the drain hose spout bent, use the supplied plastic hose guide. Secure the guide to the wall with a hook or to the tap with a piece of string to prevent the drain hose from moving. 60 ~ 90 cm Drain hose Hose guide 2.
washing a load of laundry With your new Samsung washing machine, the hardest part of doing laundry will be deciding which load to wash first. WASHING FOR THE FIRST TIME 1. Press the Power button. 2. Add a little detergent to the detergent compartment the detergent drawer. 3. Turn on the water supply to the washing machine. 4. Press the Start/Pause button. in This will remove any water that might be left over in the machine from the manufacturer’s test run.
washing a load of laundry USING THE CONTROL PANEL 1 1 2 DIGITAL GRAPHIC DISPLAY 3 4 5 6 1 7 8 9 10 11 12 13 Displays the remaining wash cycle time, all cycle information, and error messages. Select the tumble pattern and spin speed for the cycle. For detailed information, refer to “Washing clothes using the cycle selector”. (see page 30) 2 CYCLE SELECTOR Cotton - For average or lightly soiled cottons, bed linen, table linen, underwear, towels, shirts, etc.
The wool wash cycle of this machine has been approved by Woolmark for the washing of machine-washable Woolmark products provided that the products are washed according to the instructions on the garment label and those issued by the manufacturer of this washing machine, M1125 (Certificate Number issued by I.W.S. Nominee Co., Ltd.
washing a load of laundry 8 DRYING BUTTON Pressing the button cycles through the following options. Cup Board → Low Temp → Iron → Time Dry (30min. →1:00 h → 1:30 h → 2:00 h → 2:30 h → 3:00 h → 3:30 h → 4:00 h → 4:30 h) → Cup Board Cup Board - Use this cycle to dry loads such as cotton, underwear, and linen. Low Temp - This cycle protects heat-sensitive items at a low drying temperature. Iron - Finishes the dry cycle in a moist state appropriate for Ironing.
Child lock The Child Lock function allows you to lock the buttons so that the wash cycle you’ve chosen can’t be changed. Activating/Deactivating 02 WASHING A LOAD OF LAUNDRY If you want to activate or deactivate the Child Lock function, press the Temp. and Rinse buttons at the same time for 3 seconds. “Child Lock ” will be lit when this feature is activated. When the Child Lock function is activated, only the Power button works.
washing a load of laundry Drain Only Fuction When you want just drain water from washing machine, follow directions below. 1. Press the Power button. 2. Turn the Cycle Selector to the Spin position. 3. Press the Spin button repeatedly until “No spin( )” light comes on. 4. Press the Start/Pause button. My cycle Allows you to activate your custom wash (temperature, spin, soil level, etc.) with one button convenience.
Eco Bubble Eco Bubble allows detergent to distribute evenly and penetrate fabrics faster and deeper. Course Bubble function Canceling the bubble function Super Eco Wash, Outdoor Care, Baby Care, Wool • Available Available Not available A different bubble function may be applied depending the course. Eco Bubble selection is default. Press it once to deselect bubble option, press it again to select bubble option. 1. 2. 3. 4. Open the door, place the laundry inside the wash tub and close the door.
washing a load of laundry Air Wash Air Wash can refresh laundry without using water owing to its powerful airing system. Clothing that can be refreshed includes woolen coats, cotton jumpers, sweaters and suits. [Two items or less (less than 1 kg)] 1. Open the door, place the laundry into the washing machine and close the door. 2. Press the Power button. 3. Select Air Wash by turning the Cycle Selector.
USING DRY COURSE • Every press of this button will select drying type repeatedly in the following order: Cup Board → Low Temp → Iron → Time Dry (30 min. →1:00 h → 1:30 h → 2:00 h → 2:30 h → 3:00 h → 3:30 h → 4:00 h → 4:30 h) → Cup Board Drying Type Auto Drying Cupboard( Low Temp.( Iron( Time Drying( ) ) ) Information Max Load Time (Max Load) Standard: Dries the laundry. 3.5kg 140min. 2.0 kg 160min. ) Dries the laundry at a low temperature to protect the texture of the laundry.
washing a load of laundry Washing clothes using the cycle selector Your new washing machine makes washing clothes easy, using Samsung’s “Fuzzy Control” automatic control system. When you select a wash program, the machine will set the correct temperature, washing time, and washing speed. 1. Turn on your sink’s water tap. 2. Press the Power button. 3. Open the door. 4. Load the articles one at a time loosely into the drum, without overfilling it. 5. Close the door. 6.
Washing clothes manually 02 WASHING A LOAD OF LAUNDRY You can wash clothes manually without using the Cycle Selector. 1. Turn the water supply on. 2. Press the Power button on the washing machine. 3. Open the door. 4. Load the articles loosely into the drum one at a time, without overfilling it. 5. Close the door. 6. Add detergent and, if necessary, softener or prewash detergent, into the appropriate compartments. 7. Press the Temp. button to select the temperature.
washing a load of laundry Determining the load capacity Do not overload the washing machine or your laundry may not wash properly. Use the chart below to determine the load capacity for the type of laundry you are washing. Fabric Type Load Capacity Model WD0754 / WD0752 Cotton - average/lightly soiled - heavily soiled 7.5 kg Synthetics 3.0 kg Outdoor Wear 2.0 kg Wool 2.0 kg • When the laundry is unbalanced (“UE” lights up on the display), redistribute the load.
Detergent drawer Your washing machine has separate compartments for dispensing detergent and fabric softener. Add all laundry additives to the correct compartment before starting your washing machine. Do not open the detergent drawer while your washing machine is running or you might be exposed to hot water or steam. 02 WASHING A LOAD OF LAUNDRY 1. Pull out the detergent drawer on the left side of the control panel. 2.
cleaning and maintaining your washing machine Keeping your washing machine clean improves its performance, wards off unnecessary repairs, and lengthens its life. ECO DRUM CLEAN This course is a self-cleaning course that removes mold that may occur inside the washing machine. 1. Press the Power button. 2. Turn the Cycle Selector to the ECO Drum Clean course. • You can only use the Delay End function. • The water temperature during the ECO Drum Clean is set to 70 ˚C. You cannot change the temperature. 3.
03 CLEANING AND MAINTAINING The ECO Drum Clean Auto Alarm Function • If the “ECO Drum Clean” indicator on the display and the lamp on the Cycle Selector are lit after a wash, it indicates that tub (drum) cleaning is required. In this case, remove the laundry from the washing machine, turn the power on, and clean the drum by performing the ECO Drum Clean course. • If you do not perform the ECO Drum Clean course, the “ECO Drum Clean” indicator on the display and the lamp on the Cycle Selector are turned off.
cleaning and maintaining your washing machine CLEANING THE DEBRIS FILTER We recommend cleaning the debris filter 5 or 6 times a year, or when the error message of “5E” is displayed. (Refer to “Draining the washing machine in an emergency” in the previous section.) If foreign substances accumulate debris filter, the performance of the bubble function will be degraded. Before cleaning the debris filter, make sure to unplug the power cord. CAUTION 1.
CLEANING THE DETERGENT DRAWER AND DRAWER RECESS Release lever liquid detergent box (Option) 03 CLEANING AND MAINTAINING 1. Press the release lever on the inside of the detergent drawer and pull the drawer out. 2. Remove the softener divider and the liquid detergent box(option) from the detergent drawer. softener divider 3. Wash all parts under running water. 4. Clean the drawer recess with an old toothbrush. 5.
cleaning and maintaining your washing machine REPAIRING A FROZEN WASHING MACHINE If the temperature drops below freezing and your washing machine is frozen: 1. 2. 3. 4. 5. Unplug the washing machine. Pour warm water over the tap to loosen the water supply hose. Remove the water supply hose and soak it in warm water. Pour warm water into the washing machine drum and let it sit for 10 minutes. Reconnect the water supply hose to the water tap and check if the water supply and drain are operating normal.
troubleshooting and information codes CHECK THESE POINTS IF YOUR WASHING MACHINE... SOLUTION Will not start • • • • Make sure your washing machine is plugged in. Make sure the door is firmly closed. Make sure the water source tap(s) are turned on. Make sure to press the Start/Pause button. Has no water or not enough water • • • • Turn the water tap on fully. Make sure the water source hose is not frozen. Straighten the water intake hoses. Clean the filter on the water intake hose.
troubleshooting and information codes INFORMATION CODES If your washing machine malfunctions, you may see an information code on the display. If this happens, please check the table below and try the suggested solution before calling Customer Service. CODE SYMBOL SOLUTION dE • • Close the door. Make sure the door is firmly closed. 4E • • • Make sure the source water tap is turned on. Check the water pressure. Clean the mesh filters of water hose. 5E • • • Clean the debris filter.
cycle chart CYCLE CHART ( user option) DETERGENT PROGRAM Max load(kg) wash Softener Spin Speed(MAX) rpm WD0804 WD0802 Cotton 7.5 yes 95 1400 1200 Synthetics 3.0 yes 60 1200 1200 Water Saving 7.5 yes 60 1400 1200 15’ Quick Wash 2.0 - yes 40 800 800 Eco Drum Clean - - - - 70 400 400 Deodorization 1.0 - - - - - - Sanitization 1.0 - - - - - - Drying 4.0 - - - - - - Super Eco Wash 4.
appendix FABRIC CARE CHART The following symbols provide garment care directions. The care labels include four symbols in this order: washing, bleaching, drying and ironing (and dry cleaning when necessary). The use of symbols ensures consistency among garment manufacturers of domestic and imported items. Follow the care label directions to maximize garment life and reduce laundery problems.
SPECIFICATIONS TYPE FRONT LOADING WASHING MACHINE WD0754 / WD0752 DIMENSIONS WATER PRESSURE 50 kPa ~ 800 kPa WATER VOLUME 65 ℓ WD0754 / WD0752 NET WEIGHT 70 kg WASH AND SPIN CAPACITY 7.5 kg [DRY LAUNDRY] DRY CAPACITY 4.
QUESTIONS OR COMMENTS? Country CALL OR VISIT US ONLINE AT AUSTRALIA 1300 362 603 www.samsung.com Code No. DC68-02927D_EN WD0754W8E-02927D_EN(XSA).
