User Manual

22
ENG
Your television has several settings which allow you to control
picture quality.
1 Press the MENU button.
Result
: The options available in the Picture group are
displayed.
2 Press the - or + button.
3 Press the ▲ or ▼ button to select Adjust.
4 Press the - or + button.
Result
: The options available in the Adjust group are
displayed.
➣
You can also display this group simply by pressing the
P.MENU (Picture Menu) button.
5 Press the ▲ or ▼ button to select the option (Contrast,
Brightness, Sharpness, Colour, Colour tone or Tint-NTSC
only) to be adjusted. Press the
- or + button.
Result
: The horizontal bar is displayed. Move the horizontal
bar’s cursor left or right by pressing the
- or + button.
➣
◆ If you make any changes to these settings, the picture
standard is automatically switched to
Custom.
◆ The television has an “automatic degaussing” system
that is activated if magnetic interference is present.
To degauss the television screen, switch power off by
pressing the “ ” (On/Off) button on the front panel.
(Refer to “Automatic Degaussing to Remove Colour
Patches” on page 38.)
Adjusting the Picture Settings
Contrast 70
Colour tone 50
Cool Warm
Picture
Mode
œœ
Dynamic
√√
Adjust
√√
Digital NR : Off
TV
Adjust
Contrast : 70
Brightness : 50
Sharpness : 40
Colour : 60
Colour tone : 50
TV