User Manual

24
ENG
If no signal is being received or the signal is very weak, a blue
screen automatically replaces the noisy picture background.
If you wish to continue viewing the poor picture, you must set the
“Blue screen” mode to “Off”.
1 Press the MENU button.
Result
: The main menu is displayed.
2 Press the ▲ or ▼ button to select Setup.
Result
: The options available in the Setup group are
displayed.
3 Press the - or + button.
4 Press the ▲ or ▼ button to select Blue screen.
5 To activate this feature, select On by pressing the - or + button.
Setting the Blue Screen
Setup
Plug & Play
√√
Language
√√
Blue screen : On
Demonstration
√√
Tilt : 0
TV
If you find that the picture received is slightly tilted to one side, you
can adjust the tilt setting.
1 Press the MENU button.
Result
: The main menu is displayed.
2 Press the ▲ or ▼ button to select Setup.
Result
: The options available in the Setup group are
displayed.
3 Press the - or + button.
4 Press the ▲ or ▼ button to select Tilt.
5 Press the - or + button to reach the required setting (-7 to +7).
Using the Tilt Control Feature
Setup
Plug & Play
√√
Language
√√
Blue screen : On
Demonstration
√√
Tilt : 0
TV