User Manual

ENG

The “I-II” button displays/controls the processing and output of the

audio signal. When power is switched on, the mode is automatically

preset to either “Dual-I ” or “Stereo”, depending on the current

transmission.

➣

◆ If the receiving conditions deteriorate, listening will be

easier if the mode is set to the

Mono.

◆ If the stereo signal is weak and an automatic switching

occurs, then switch to the

Mono.

◆ When receiving a mono sound in the AV mode, connect

to the “AUDIO-L” input connector on the panel (front or

side). If the mono sound comes out only from left

speaker, press the

I-II button.

Selecting the Sound Mode (depending on the model)

Type of broadcast

Regular broadcast

(Standard audio)

Regular +

NICAM Mono

NICAM Stereo

NICAM Dual-I/II

Regular broadcast

(Standard audio)

Bilingual or Dual-I/II

Stereo

On-screen indication

Mono

(Normal use)

Mono ↔ Mono

NICAM (Normal)

Stereo ↔ Mono

NICAM (Normal)

Mono (Normal use)

DUAL-I ↔ DUAL-II

Stereo ↔ Mono

(Forced mono)

Dual-I → Dual-II → Mono

NICAM NICAM (Normal)

NICAM

Stereo

→