User Manual
11
The mains lead is attached to the rear of your television.
☛
If you have purchased this television in the United
Kingdom, refer to page 61 for further instructions on
plug wiring.
1 Plug the mains lead into an appropriate socket.
➢
The main voltage is indicated on the rear of the television
and the frequency is 50 or 60Hz.
2 Press the “” button (On/Off) on the front of the television.
Result
: The Standby indicator on the front of the television
lights up.
3 Press the POWER button on the remote control to switch the
television on.
Result
: The programme that you were watching last is re-
selected automatically.
➢
If you have not yet stored any channels, No clear picture
appears. Refer to “Storing Channels Automatically” on page
16 or “Storing Channels Manually” on page 17.
4 To switch your television off, press again the “” button (On/Off)
on the front of the television.
➢
If your television isn’t turned on when the “” button
(On/Off) is pressed, press the
SELECT button to check if
the “
TV” mode has been chosen.
Switching Your Television On and Off
ENG
TV
Front of the TV