User Manual
14
ENG
When the television is initially powered on, several basic customer
settings proceed automatically and subsequently. The following
settings are available.
1 If the television is in Standby mode, press the POWER button on
the remote control.
Result
: The Plug & Play is displayed.
2 To start the Plug & Play, press the ENTER button.
Result
: The Language menu is displayed.
3 Select the appropriate language by pressing the † or … button.
Press the
ENTER button to confirm your choice.
Result
: The message Antenna input check is displayed.
4 Make sure that the antenna is connected to the TV.
Result
: After a little while, the Country menu is displayed.
5 Select your country by pressing the ▲ or ▼ button. Press the
ENTER button to confirm your choice.
Result
: The ATM menu is displayed.
6 To start the channel store, press the ENTER button.
Result
: The search will end automatically. Channels are sorted
and stored in an order which reflects their position in the
frequency range (with lowest first and hialghest last).
➢
To stop the search before it has finished or return to normal
viewing, select the
Exit and press the ENTER button.
7 When the setting has finished all, the message Enjoy viewing
your new TV
is displayed, and then the channel which has been
stored will be activated.
Plug and Play Feature
Plug & Play
Start
Exit
Press ENTER to start
Plug & Play.
English
ЬА
Hrvatski
Čeština
Netherland
Français
Language
Move Enter
Austria
Belgium
Croatia
Denmark
Finland
France
Germany
Country
Move Enter
Plug & Play
Antenna input check
Enjoy viewing your new TV
Press ENTER to start
channel store. P
-----
ATM
Start
Exit