User Manual

25
ENG
You can select the type of picture which best corresponds to your
viewing requirements.
1 Press the MENU button.
Result
: The options available in the Picture group are
displayed.
2 Press the ENTER button.
Result
: The Picture Mode is selected.
3 Press the ENTER button again. Select the required picture effect
by pressing the
† or … button.
Result
: The following picture effects are available:
Dynamic - Standard - Movie - Custom.
➢
You can also set these options simply by pressing the
P.MODE (Picture Mode) button.
Changing the Picture Standard
Picture Mode : Dynamic
√√
Custom Picture
√√
Scan Mode : Natural Scan
√√
Digital NR : Off
√√
DNIe : Off
√√
PIP
√√
†
More
Picture
Move Enter Return
Dynamic
Standard
Movie
Custom
Your television has several settings which allow you to control
picture quality.
1 Press the MENU button.
Result
: The options available in the Picture group are
displayed.
2 Press the ENTER button.
3 Press the † or … button to select Custom Picture. Press the
ENTER button.
Result
: The options available in the Custom Picture group
are displayed.
4 Press the † or … button to select the option to be adjusted (Color
Tone, Brightness, Color, Contrast, Sharpness or Tint-NTSC
only). Press the
ENTER button.
Result
: The horizontal bar is displayed. Move the horizontal
bar’s cursor left or right by pressing the
œ or √
button.
➢
If you make any changes to these settings, the picture
mode is automatically switched to
Custom.
Adjusting the Picture Settings
Color Tone 50
Brightness 50
Color 50
Contrast 70
Sharpness 50
Custom Picture
Move Enter Return
Picture Mode : Dynamic
√√
Custom Picture
√√
Scan Mode : Natural Scan
√√
Digital NR : Off
√√
DNIe : On
√√
PIP
√√
†
More
Picture
Move Enter Return