User Manual

installation & connection
12_ installation & connection
CONNECTING WITH OTHER DEVICE
J
`
The CVBS out terminal of the product is provided for easier installation, and is not recommended for monitoring purposes.
`
The Micro USB out terminal of the product is provided for easier installation, and is not recommended for monitoring
purposes.
Ethernet Connection
Connect the Ethernet cable to the local network or to the Internet.
Connecting Wi-Fi
Camera Setup
1. Connect OTG gender (5-pin) and WiFi dongle to the micro USB terminal.
Smartphone Setup
1. Install the Wisenet Installation application.
2. Select the camera SSID after turning on the WiFi.
3. Run the Wisenet Installation application.
4. When you log in to the camera, the video will be connected. (initial password: 4321)
`
The video will be played without being logged in during the initial connection.
5. The camera angle can be adjusted through the smartphone video.
Recommended dongle manufacturer
Manufacturer Model
NETIS WF2123 n300
EDIMAX EW-7811Un
IP Time N100mini
TP-LINK TL-WN823N V1
ASUS USB-N13
NETGEAR WNA3100M
Power Supply
Use the screwdriver to connect each line (+, –) of the power cable to the corresponding power port of the
camera.
J
`
When connected to PoE and DC 12V power or PoE and AC 24V power simultaneously, the device uses the external power (AC
24V or DC 12V).
-
You can also use a router featuring PoE to supply power to the camera.
-
Use PoE that is compliant with the IEEE802.3af protocols.
`
Be careful not to reverse the polarity when you connect the power cable.
`
AC24V can be connected in non-polar union.
`
If you want to connect an external device, you must turn off the external device before proceeding.
`
Connect the set and the adapter power line first, and then connect the power cable to the outlet on the wall.
Power Cable Specification for Each Model
In case of DC 12V Input:
Wire Type (AWG) #20 #18
Cable Length (Max.) 17m 27m
In case of AC 24V Input:
Wire Type (AWG) #22 #20
Cable Length (Max.) 25m 40m
Network Cable Specification
Item Contents Remark
Connector RJ45
Ethernet 10/100Base-T 10/100 Mbps
Cable UTP Category 5e
Max Distance 100M
PoE Support IEEE 802.3af
AUDIO
OUT
MICRO
USB
VIDEO
NETWORK
ACT LINK
DC 12V
AC 24V
FOCUS
1 2 3 4 5 6
RESET
ALARM IN : 1
ALARM OUT : 2
GND:3 NC : 4
RS-485+ : 5
RS-485- : 6
PWR
IN
SOFT AP
Monitor to install
Ethernet
Power
Wi-Fi dongle