User Manual

English _33
●● SETUP SCREEN
Protocol
P
control
P
movement
speed
T
control
T
movement
speed
Zoom
control
Zoom
movement
speed
Focus
control
Focus
control
speed
Preset
save
Preset
movement
Remarks
PANASONIC O O O O O O O X O O
HONEYWELL O O O O O X O X O O
AD O O O O O X O X O O
VICON O O O O O X O X O O
GE O O O O O O O X O O
BOSCH O O O O O O O X O O
5. Click the cursor [ ] on the screen moving pad to control movement of the screen.
• Move screen: Scroll the cursor in the direction desired.
• Control screen movement rate: The further away the cursor is from the center, the faster it moves on the
screen.
6. Control zoom movement.
• Zoom In: Move up the bar in the right of the UI, or press the [
] button.
The farther the bar is from the center, the faster the screen expands.
• Zoom Out: Move down the bar in the right of the UI, or press the [
] button.
The farther the bar is from the center, the faster the screen reduces in size.
7. Adjust the focus.
• Manual focus (
/ ) : Adjusts the focus of the screen for short distance or long distance.
M
`
The pan/tilt/zoom operations can be controlled only if the camera is connected to a pan/tilt receiver with a proper <Serial
setup>.
To add a preset
1. Select the preset number to add.
2. Set the name for the preset.
3. Press the [Add] button.
To delete a preset
1. Select the preset number to delete.
2. Press the [Remove] button.
To move a preset
1. Select a preset number that you want to move.
2. Press the [Go] button.
Digital PTZ
Use this settings page to move the camera view and perform the digital zoom.
J
`
DPTZ jog is output when there is at least 1 profile with the <DPTZ profile> option enabled among the profiles saved in
<Video profile>.
1. From the Setup menu, select the <PTZ (
)> tab.
2. Click <Digital PTZ>.
To add a preset
1. Select the preset number to add.
2. Set the name for the preset.
3. Press the [Add] button.
To delete a preset
1. Select the preset number to delete.
2. Press the [Remove] button.
To move to a desired preset
1. Select a preset number that you want to move.
2. Press the [Go] button.
To set a group
The group function enables you to group various presets before calling them in sequence. Six groups can
save a total of 128 presets each.
1. Select a group setting mode.
2. Press the [Add] button.
Entered in the bottom list.
3. If you want to delete a preset added, select it and press the [Delete] button.
4. Press the [Start] button.
It performs the group operation.
5. Press the [Stop] button.
The running group will be stop.
6. Press the [Remove] button.
Selected group data will be deleted.