User Manual

English _35
●● SETUP SCREEN
Camera setup
You can change the camera settings according to the environment where the camera is located.
1. From the Setup menu, select the <Video & Audio (
)>
tab.
2. Click <Camera setup>.
3.
Configure the settings as necessary of : Image preset mode,
Sensor, SSDR, White balance, Back light, Exposure, Day/
Night, Special, OSD
4. When done, click [Apply].
`
If a certain time (timeout: 240s) is elapsed with your not pressing the
[Apply]
button after changing the settings, your changes will not be
applied.
If you want to set an image preset
Users can set presets easily.
The selected image preset mode will be in operation during the configured period, but at other times the
values configured in the user preset mode are reflected.
1. Select a desired mode from the image presets.
• Motion & Bright video : This is the factory setting for
your camera. Select it for video recording, focusing on
reproducibility.
• Motion : Record a moving object clearly. If there are many
moving objects, such as on a road or in a crowded place
like a museum, select this option.
J
`
Noise level can increase in a low illumination environment, and
sensitivity can go down.
• Noise reduction : Select this when you need a video with low noise in the low illumination environment.
• Bright video : This makes the dark area in a full video brighter.
J
`
Video contracts effects are reduced.
• Motion & Noise reduction : Use this when there are many moving objects, such as on a road or
in a crowded place like a museum, or when you need a video with low noise in a low illumination
environment.
• High definition : Use it when there are many moving objects, such as on a road or in a crowded place
like a museum, or when you need to make a dark area in full video brighter.
• Vivid video : Makes the entire video displayed in vivid colors.
J
`
The contrast of the video reduces and the color reproducibility becomes low.
• User preset : Select it if you want to display video with settings chosen by you.
J
`
When selecting a mode other than the preset mode, you can’t set the shutter speed, AGC, SSDR, SSNR and color.
2. Set the camera item for each image preset mode.
3. Set the <Activation time>.
• Off : Your camera will execute a specific image preset operation at all times.
• Only scheduled time : Your camera will execute a specific image preset operation for the time period set
by you on each date.
4. Click the [
] button.
5. Set the <Mode> and <Time>.
6. When done, click [Apply].
Initial setting for each image preset mode
Image preset
Minimum
shutter
Maximum
shutter
Prefer
shutter
AGC SSDR SSNR 2D SSNR 3D COLOR
Motion & Bright video
Default
(1/5)
1/12000 1/60(1/50)
Default
(High)
Default (12) Default (12) Default (12) Default (50)
Motion 1/30 1/12000 1/200
Default
(High)
Default (12) 4 4 Default (50)
Noise reduction 1/15 1/12000 1/60(1/50) Middle Default (12) Default (12) Default (12) Default (50)
Bright video
Default
(1/5)
1/12000 1/60(1/50)
Default
(High)
18 Default (12) Default (12) Default (50)
Motion & Noise
reduction
1/30 1/12000 1/200 Middle Default (12) 4 4 Default (50)
High definition 1/30 1/12000 1/200
Default
(High)
18 4 4 Default (50)
Vivid video
Default
(1/5)
1/12000 1/60(1/50)
Default
(High)
18 Default (12) Default (12) 90
User preset Manual Manual Manual Manual Manual Manual Manual Manual
M
`
The preset setup functions as an aid to users to configure setup. If you don’t want the preset function, deactivate it before
use.
`
If you change the image preset, only shutter/AGC/SSDR/SSNR/COLOR are reset to the default value for each model.
`
The “Camera Setting” value does not change between presets.