User Manual

setup screen
38_ setup screen
To Set Day/Night
1. Select <Day/Night>.
2. Select each item and set it properly.
• Mode : Mode is used to adjust the color of Color or Black
and White.
- Color : The video is always output in color.
- B/W : The video is always output in black and white.
- Auto : Normally, it is set to Color but to B&W under low
luminance at night.
`
If AGC of the <Exposure> menu is set to <Off>, the day/night
mode cannot be set to <Auto>.
- External : It controls the color of the video when the alarm input terminal is synchronized with an
external device.
- Schedule : Set the time during which the camera is operated in the color mode.
• Dwell Time : It specifies the period for which the selected brightness condition must be maintained to
switch the lighting mode from Day to Night or vice versa.
• Duration : It specifies the interval of lighting mode conversion.
• Alarm in : The video is set to Color or B/W as the alarm sensor is open or closed.
`
If the Day/Night mode is set to External Input, the alarm input function of the Event-Alarm Input page is disabled.
• Simple focus after D/N: The video is automatically focused after the lighting mode changes from Day to
Night or vice versa.
• Activation time(Color) : It specifies the schedule for color mode operation.
`
If it is set, the Color mode is maintained from 00 second of the starting time to 59 second of the ending time.
J
`
When you switch to day/night mode, motion detection mode does not work.
To Setup Special
1. Select <Special>.
2. Select each item and set it properly.
• DIS : Compensates the image automatically when it is seen
to shake for stable image output.
M
`
Mitigate the degree of image vibration when the camera
vibrates due to the external factors such as wind.
• Sharpness : Adjust the overall sharpness of the image.
If selecting <On>, you can adjust the sharpness of the
image.
• Sharpness level : The higher the level is, the sharper and clearer the outline of the image becomes.
• Gamma : Adjust the contrast of the image.
• Contrast : Adjusts the difference between the darkest area and the brightest area in the video.
• Color level : Adjust the strength of video color.
• Defog : Compensate the video in the foggy or cloudy weather.
It is set to <Off> as a default. Specials are used when the video looks blurry in the foggy weather.
- Off : Disable the fog elimination function.
- Auto : The image is automatically compensated according to the foggy level. Adjust <Defog level>
to be more effective.
- Manual : The user manually sets the amount of compensation for each image.
J
`
If the defog mode is set to <Auto>, the performance is proportional to the fog level. To keep the set defog level without
regard to the fog level, set the defog mode to <Manual>.
`
If the manual defog level is high in a thin fog, the image may become too dark.
• Defog level : Control the defog level.
• LDC : To determine whether or not to use the image distortion correction.
• LDC Level : To adjust the level of the distortion correction factor.
To Set OSD
1. Select <OSD>.
2. Select each item and set it properly.
• Camera title : It specifies the name of the camera to be
displayed on the screen.
Select the <Use> check box to add a camera name.
- Add : Click the <Add> button and you can add a
total of 5 lines, 15 characters per line and a total of 60
characters.
- Preview : Click the <Preview> button to check the name of camera that will be displayed on the
screen.
• Camera title X, Y : It specifies the position of the camera name on the screen.
• Date & time : Set the time display and date formats on the screen.
• Date & Time X, Y : Specify the position of time display on the screen.
• Weekday overlay : Specify the use of date display date on the screen.
• Size : Sets the size of OSD to small/medium/large.
• Color : Sets the color of the OSD to white/red/blue/green/black/gray.
• Transparency : Sets the transparency of OSD to opaque / low / middle / high.
J
`
A position-adjustable item (Camera title, Date & Time) may not be displayed normally if it overlaps with another fixed OSD
item.
`
Multilingual other than English: Input only in the selected language is available.