User Manual

setup screen
52_ setup screen
6. Configure the event motion schedule and event motion conditions.
`
For more information about <Event activation time> and <Event action settings>, refer to “Alarm input”. (page 47)
7. When done, click [Apply].
J
`
In <Video & Audio> - <Audio setup>, it is recommended to set the audio input gain to a value ranging from 4 to 6.
`
In <Video & Audio> - <Audio setup>, if you set the audio input source to an external microphone, the recommended
microphone specifications are as follows.
-
Frequency range: 40 to 16,000Hz
-
Impedance: 1,500Ω
-
Sensitivity: -40±3 dB (7.1~14.1 mV)
`
In the following cases, sound source classification performance may be impaired or malfunction.
-
Gunshot sounds are generated consecutively, such as the sound made by a machine gun rather than a one-shot sound.
-
Noise is too loud to distinguish from the target sound source.
-
2 or more sound sources are input simultaneously.
-
Sound source classification is applied in a quiet environment using the noise removal function
-
Sound of applause or scream is heard from a close distance (within 1m) from the camera
-
A loud sound source that does not belong to any of the sound source categories such as aircraft sound or siren sound is
suddenly generated
-
The external microphone does not conform to the recommended specifications
SYSTEM SETUP
Product information
1. From the Setup menu, select the <System ( )> tab.
2. Click <Product information>.
3. Check the camera information, or provide details according
to your network environment.
• Model : Model name of the product.
• Serial number : Product serial number.
• Device name : Provide a device name that will be displayed
on the Live screen.
• Location : Specify the location where the camera is installed.
• Description : Provide detailed information about the camera location.
• Memo : Provide an explanation about the camera for better understanding.
• Language : Select a preferred language for the Web Viewer OSD.
M
`
The default language is set to <English>.
4. When done, click [Apply].
Upgrade / Reboot
1. From the Setup menu, select the <System ( )> tab.
2. Click <Upgrade / Reboot>.
3. Select a desired item and set it appropriately.
• Upgrade : Performs upgrading the system.
When reconnecting, the web viewer will not run normally if
the browser cache is not completely clear.
• Factory default : Initializes all setting information including the camera settings to the factory reset state.
(however, logs are not initialized)
- Select the <Except network parameter & Open Platform> check box and settings other than
network settings and open platform settings will be reset.
`
The IP addressing system will be defaulted to DHCP if you reset the camera. If no DHCP server is found, the previous settings
will be restored automatically.
• Configuration backup & Restore : Backs up the current system settings before performing the
restoration process. The system is automatically restarts after backup or restoration.
• Restart : Restarts the system.