AH68-01755B (Rev 0.
Contents I Before You Begin Safety Instructions ..............................................................................................................................................4 Features ..............................................................................................................................................................6 Components ............................................................................................................................................
Safety Instructions Safety Instructions Read and understand all the instructions to avoid injury to yourself and damage to the equipment. Do not expose to extreme temperatures (above 35°C or below -5°C). Do not expose to moisture. Be careful not to subject the player to excessive pressure when wearing it round your neck. Do not expose to direct sunlight or heat sources. I Earphones Follow Traffic Safety Instructions ● Do not use the earphones while driving an automobile or riding a bicycle.
Features MP3, WMA, Audio ASF and Ogg Playback ● The player supports playback of MP3, WMA, Audio ASF, and Ogg(Ogg Vorbis) ✻ OGG is a new audio compression format that is free, open and unpatented. For more info, see www.vorbis.com Features USB 2.0 Support ● Maximum data speed transfer of 18Mbps Upgradable ● You can upgrade the built-in programs when available. Please check the home page (www.samsung.com) for upgrades.
Components Location of Controls I Replacing the Player Cover Connecting the Necklace Earphones Player Cover ● Open the groove on the cover with your fingertips, take off the cover and put on another cover of your desired color. Necklace Earphones Necklace Earphones Player ✍ Caution Connection Link Installation CD User Manual - Take care not to injure your fingertips when you open the cover with your fingertips.
Components Charging the battery 1 Connect the USB cable to the USB port on your computer. 1 1 2 3 7 4 8 5 9 1 2 3 4 5 6 7 8 Volume Control Menu/Navigation Button USB Cable Connection Port, Earphone Port Skip Track/Speed Search Button 2 Connect the other end of the USB cable to the USB Cable Connection Port on top of the player. ✽ When recharging is complete, “Fully Charged” is shown in the display window. ✽ Battery recharge time in normal operation is approximately 2 hours and 30 minutes.
Connecting the Player to Your PC Connecting the Player to Your PC Make sure to install the USB driver before connecting the player to your PC. If 'Add Hardware wizard' appears, click the [Cancel] button and install the USB driver. ▼ System Requirements. The PC system must meet the following specifications: ● Pentium 200MHz or greater ● Windows 98 SE/ME/2000/XP ● 40MB of available hard disc space ● CD-ROM drive (double speed or greater) ● USB port (2.0) supported ● Direct X 8.
Connecting the Player to Your PC I Connecting the player to PC with the USB cable 1 Connect the USB cable to the USB port on your computer.
Manual Installation of the USB Driver If the USB driver has successfully installed, go to "Downloading/Uploading Files"(P19). If the USB driver is not automatically installed, follow the procedures below. I When an error occurs during installation of the USB driver Manual Installation of the USB Driver 4 After selecting the driver, 5 Click [Next]. click [Update Driver]. 1 Check the device manager.
Manual Installation of the USB Driver I In Windows 98 Using the Player as a Removable Disk I Downloading/Uploading Files Follow the instructions in the window to complete the installation. 1 Connect the player to your PC with the supplied USB cable. 2 Open Windows Explorer on your PC. ● Removable Disc is displayed in Windows Explorer. 3 Select the file to save and drag-and-drop it into the removable disc icon.
Using the Player as a Removable Disk I Disconnecting the USB Cable After completing the file transfer, you must disconnect the cable in the following way: 1 Double-click on the green arrow in the taskbar on the Using the Player as a Removable Disk I Formatting the Player on your PC 1 Select the removable disc icon and click the right mouse button to select [Format]. bottom right of the Desktop. 2 Press the [Start] button. ● All saved files will be formatted.
Installing Music Studio Installing Music Studio Music Studio is a program that enables you to play back music files on your PC. 1 Insert the Installation CD into CD-ROM drive. 2 Select language. Select [Install Samsung Music Studio]. I To View Help on Music Studio Launch Music Studio and press the F1 key on the keyboard. ● Help will be displayed. Move the arrow to the top of Music Studio and right click on the mouse. The following selection window will appear.
Playing Music Recording Voice I Turning Power On and Off Power On : Press and hold the Power Off : Press and hold the button to turn on the power. button to turn off the power. I Playing Music (Power On) Press the ✽ To move to other modes from the Voice mode, refer to “Changing Mode”. 1 Press and hold the REC button to start voice recording. 2 Press the REC button again to stop the recording and save the voice file. button. ● Playback starts automatically.
Searching for Music/Voice Files I To Search for Specific Parts During Play ● Press and hold the , button during playback to search for the part you want to listen to. ● Release the button to resume play normally. I To Change Tracks During Play ● Press the button briefly during playback to play the next track. ● Press the button briefly within 5 seconds after playback starts to move to and play the previous track. Press the button briefly after 5 seconds to play the current track from the beginning.
Listening to FM Radio I Searching Stored Frequencies 1 Press the “M” key in the FM mode. ● PRESET screen appears. 2 Use the , button to move to the frequency you want. Recording FM 1 Press and hold the REC button while receiving FM. ● Recording of the current FM channel begins. 2 Press the REC button again. ● A recording file is created and the recording stops. ● Files are recorded in the order F001, F002, F003... and saved as MP3 files in FM_ENC folder.
MENU Options Using Navigation You can easily search for files or switch modes using the Navigation function. Press and hold the “M” key to switch to the Menu mode. Use , to move and press the “M” key briefly to select the menu you want. Press and hold the “M” key again to exit the MENU mode. 1 Press the “M” key to enter Navigation mode or press and hold the “M” Key to move to Menu and then select Navigation in Menu. 2 Select the file or folder that you want to play.
Using Navigation Using Navigation I Changing Mode I Playing/Exiting Folder ● You can change the mode in the following method. Ex) To change from the Voice mode to the Music mode [ Playing Folder ] 1 Press the “M” key to move to the Navigation mode. 1 Press the “M” key in the Voice mode. 2 Use , ● When " 2 Use the 3 Use , to move to the folder you want and press the button. " appears, the selected folder will be played. button to move to the upper folder.
Setting Playlist Setting the Advanced Functions I Setting Playlist - Move to the file you want in Navigation mode and press the “M” key. 1 Select Settings from the menu. (Refer to "Menu Options") 2 In Settings, use ● The selected file will be marked. ● To exit the playlist setting, move to the marked file in Navigation mode and press the “M” key again. I Playing Playlist , to move to the function you want and press the “M” key to select.
Selecting the Play mode Sound Settings Select Sound Effect in Settings. I Preset EQ 1 Select Play Mode in Settings. 2 In Play mode, use , to move to the mode you want and press the “M” key to select. Normal Repeat One Repeat All Shuffle All Intro Return ● Normal : To play all the files in order one time. ● Repeat One : To repeat one file. ● Repeat All : To repeat all files. ● Shuffle All : To play files at random. ● Intro : To play the first few seconds of a music file.
Sound Settings Display Settings I WOW Set ● Use Select Display in Settings. to select the SRS function you want, and then press the “M” key. ● The SRS function is applied only when you select the SRS, TruBass or WOW in the Preset EQ. , ● SRS : You will hear 3D surround sound. Use , to adjust SRS from 0 to 10. I Scroll ● Use , to set the scroll speed from X1 to X5 to adjust the speed of the track title movement. ● TruBass : A bass boost feature that adds fullness to the sound.
Language Settings Display Settings Select Language in Settings. I Screen Saver ● Use , to set Screen Saver. ● You can set Screen Saver to Clock, Screen Saver1 or Screen Saver2. When the LCD light is turned off, the Screen Saver screen appears. ● When you make a recording, the Recording Screen Saver appears regardless of the set screen saver. I Menu Clock Screen Saver1 Screen Saver2 I Screen Saver Term ● Use , to set the time to show screen saver.
FM Radio Settings Time Settings Select FM Radio in Settings. Select Time in Settings. I Auto Preset I Auto Off Time ● Use , to set the Auto Off time. ● You can select Off ➔ 5sec ➔ 10sec ➔ 15sec ➔ 30sec ➔ 1min ➔ 5min. If no button is pressed after play stops, the player will automatically turn off after the time you set. ● When Auto Off is set to Off, the function is disabled. ● If you select Auto Preset, frequencies within the range of 87.5MHz to 108.0MHz are automatically selected and stored.
Time Settings Managing Files Select File in Settings. I Deleting a File I Time Set ● Select the Time Set to set the current time. If you have selected Clock for Screen Saver, you can view the current time on the screen when the Screen Saver is set. ● Use , to set the clock time, and then press the button to move to the next stage. ● When the time setting is complete, move to OK by using , and press the “M” key. 1 Select Delete in File.
Setting the System Setting the System Select System in Settings. I Skip Interval I Resume ● Use , to select Resume On or Off. ● On: Playback will resume from the point it was previously stopped. ● Off: Playback will resume from the beginning of the track. Resume On Off I Default Vol ● Use , to set the default volume to a level between 0 and 30.
MENU Table Troubleshooting The software doesn’t work ● Refer to the System Requirements Music FM Radio Navigation Playlist Settings Exit The player does not work and the LCD displays nothing. ● Check the battery charge status of the player. ● Connect the player to PC and run YP-F1 Updater in the desktop to update the player. ● Open the cover of the player and press the RESET hole. In Play mode, music is not played after pressing the Play button.
Troubleshooting The player is automatically turned off. ● In Stop mode, the power may automatically be turned off depending on settings. ● Check to see if there are files saved in it. Play Time is not displayed correctly during playback. ● Check to see if the file is a VBR(Variable Bit Rate) file. LCD display is dark. ● Check the Contrast setting. The file name and Tag information are not displayed correctly. ● Select [Settings] ➔ [Language] ➔ [ID3-Tag] from the menu and change the Language setting.
Specifications The product unit accompanying this user manual is licensed under certain intellectual property rights of certain third parties. This license is limited to private non-commercial use by end-user consumers for licensed contents. No rights are granted for commercial use.
