Owner Manual

Table Of Contents

ASSEMBLY INSTRUCTION

BAR CART

B D

2pcs 2pcs 4pcs

This page lists all the contents included in

the box. Please take the time to identify

the hardware as well as the individual

components to this product. As you

unpack and prepare for assembly, place

the contents on a carpeted or padded

area to protect them from damage.

2pcs8pcs

16pcs

2pcs

1pc

Allen Key

Spanner

1pc

Bolt

Ø1/4"x12mm

Bolt

Ø1/4"x25mm

2pcs

Side Frame Shelf Ring

Cross Bar

Caster

(With Lock)

Shelf Panel

Caster

(Without Lock)

PAGE 1
ASSEMBLY INSTRUCTION BAR CART A Side Frame B Shelf Ring C Cross Bar D Shelf Panel 2pcs E Bolt Ø1/4"x12mm 2pcs F Bolt Ø1/4"x25mm 4pcs G Caster (With Lock) 2pcs H Caster (Without Lock) 16pcs I Allen Key M4 8pcs J Spanner 1pc 2pcs 2pcs 1pc This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product.
PAGE 2
1 Attach Shelf Ring (B) & Cross Bar (C) to one piece of Side Frame (A) using Bolt (E) by Allen Key (I) as below shown. A I E E B C I B C 2 Attach Shelf Ring (B) & Cross Bar (C) to the other piece of Side Frame (A) using Bolt (E) by Allen Key (I) as below shown.
PAGE 3
Attach Shelf Panel (D) to Cross Bar (C) using Bolt (F) by Allen Key (I) as below shown. F D I D C C 4 Attach Caster (G) & Caster (H) to Side Frame (A) by Spanner (J) as below shown. A H A G G H J G Cleaning & Care Treat surface with care. Surface is resistant to scratches but is not scratch resistant. Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Hardware may loosen over time. Periodically check that all connections are tight.