User Manual

Basic Operation

CHAPTER 3

This chapter describes basic user operation instructions for the

SanDisk Clip Jam MP3 player.

Basic Operation

Power/ Select Button

The Power button is located in the center of the player. It can be used to turn

the player on

or off, and also to select player options.

Power On

Press and hold the Power button for three seconds to turn on the player. The

last played

function screen from the Main Menu will appear after the device has

been powered on.

Power Off

Press and hold the Power button for three seconds to turn off the player.

Reset

If the player freezes for any reason, power off the player and then restart it

again. After you

perform the reset, any adjustments made during the last

operation will be lost. Your saved

content (e.g. Music Files, Audiobooks, etc.)

will not be deleted from the player.

Connecting Player to a Windows or Mac Computer

1.! To connect the player to a Windows computer, follow these steps:

2.! Connect the large end of the USB cable into an available USB port on the

computer.

3.! Connect the smaller end of the USB cable into the player’s dock connector.

4.! The display screen will show “Charging” (shown below).

5.! The player will appear in My Computer as “CLIP JAM.”